From: Shawn Guo <shawnguo@kernel.org>
To: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/1] arm64: dts: tqma8mqml: add PCIe support
Date: Wed, 26 Jan 2022 20:56:51 +0800 [thread overview]
Message-ID: <20220126125648.GT4686@dragon> (raw)
In-Reply-To: <20211217102207.722897-1-alexander.stein@ew.tq-group.com>
On Fri, Dec 17, 2021 at 11:22:07AM +0100, Alexander Stein wrote:
> Add PCIe support to TQMa8MxML series.
>
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
It doesn't apply to my imx/dt64 branch. Could you rebase?
Shawn
> ---
> This goes on top of the series recently applied to pci/dwc [1]:
> [PATCH v7 0/8] Add the imx8m pcie phy driver and imx8mm pcie support
> [1] https://patchwork.kernel.org/project/linux-pci/list/?series=589031&state=*
>
> .../dts/freescale/imx8mm-tqma8mqml-mba8mx.dts | 19 +++++++++++++++++++
> .../boot/dts/freescale/imx8mm-tqma8mqml.dtsi | 5 +++++
> arch/arm64/boot/dts/freescale/mba8mx.dtsi | 6 ++++++
> 3 files changed, 30 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
> index 7844878788f4..286d2df01cfa 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
> @@ -5,6 +5,7 @@
>
> /dts-v1/;
>
> +#include <dt-bindings/phy/phy-imx8-pcie.h>
> #include "imx8mm-tqma8mqml.dtsi"
> #include "mba8mx.dtsi"
>
> @@ -58,6 +59,24 @@ expander2: gpio@27 {
> };
> };
>
> +&pcie_phy {
> + clocks = <&pcie0_refclk>;
> + status = "okay";
> +};
> +
> +&pcie0 {
> + reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
> + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
> + <&pcie0_refclk>;
> + clock-names = "pcie", "pcie_aux", "pcie_bus";
> + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
> + <&clk IMX8MM_CLK_PCIE1_CTRL>;
> + assigned-clock-rates = <10000000>, <250000000>;
> + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
> + <&clk IMX8MM_SYS_PLL2_250M>;
> + status = "okay";
> +};
> +
> &sai3 {
> assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
> assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
> index 284e62acc0b4..16ee9b5179e6 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
> @@ -227,6 +227,11 @@ eeprom0: eeprom@57 {
> };
> };
>
> +&pcie_phy {
> + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
> + fsl,clkreq-unsupported;
> +};
> +
> &usdhc3 {
> pinctrl-names = "default", "state_100mhz", "state_200mhz";
> pinctrl-0 = <&pinctrl_usdhc3>;
> diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
> index e694dacb16af..42e12c190e9e 100644
> --- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
> +++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
> @@ -87,6 +87,12 @@ panel_in_lvds0: endpoint {
> };
> };
>
> + pcie0_refclk: pcie0-refclk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <100000000>;
> + };
> +
> reg_12v: regulator-12v {
> compatible = "regulator-fixed";
> regulator-name = "MBA8MX_12V";
> --
> 2.25.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2022-01-26 12:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-17 10:22 [PATCH 1/1] arm64: dts: tqma8mqml: add PCIe support Alexander Stein
2022-01-26 12:56 ` Shawn Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220126125648.GT4686@dragon \
--to=shawnguo@kernel.org \
--cc=alexander.stein@ew.tq-group.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).