* [PATCH] net: stmmac: dump gmac4 DMA registers correctly
@ 2022-01-28 15:36 Camel Guo
2022-01-28 22:29 ` Jakub Kicinski
0 siblings, 1 reply; 3+ messages in thread
From: Camel Guo @ 2022-01-28 15:36 UTC (permalink / raw)
To: Giuseppe Cavallaro, Alexandre Torgue, Jose Abreu, David S. Miller,
Jakub Kicinski, Maxime Coquelin
Cc: kernel, Camel Guo, netdev, linux-stm32, linux-arm-kernel,
linux-kernel
From: Camel Guo <camelg@axis.com>
Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are
located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump
gmac4 DMA registers correctly, this commit checks if a net_device has
gmac4 and uses different logic to dump its DMA registers.
This fixes the following KASAN warning, which can normally be triggered
by a command similar like "ethtool -d eth0":
BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30
Write of size 4 at addr ffffffc010177100 by task ethtool/1839
kasan_report+0x200/0x21c
__asan_report_store4_noabort+0x34/0x60
dwmac4_dump_dma_regs+0x6d4/0xb30
stmmac_ethtool_gregs+0x110/0x204
ethtool_get_regs+0x200/0x4b0
dev_ethtool+0x1dac/0x3800
dev_ioctl+0x7c0/0xb50
sock_ioctl+0x298/0x6c4
...
Signed-off-by: Camel Guo <camelg@axis.com>
---
.../net/ethernet/stmicro/stmmac/dwmac_dma.h | 1 +
.../ethernet/stmicro/stmmac/stmmac_ethtool.c | 19 +++++++++++++++++--
2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
index 1914ad698cab..acd70b9a3173 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
@@ -150,6 +150,7 @@
#define NUM_DWMAC100_DMA_REGS 9
#define NUM_DWMAC1000_DMA_REGS 23
+#define NUM_DWMAC4_DMA_REGS 27
void dwmac_enable_dma_transmission(void __iomem *ioaddr);
void dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index 164dff5ec32e..abfb3cd5958d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -21,10 +21,18 @@
#include "dwxgmac2.h"
#define REG_SPACE_SIZE 0x1060
+#define GMAC4_REG_SPACE_SIZE 0x116C
#define MAC100_ETHTOOL_NAME "st_mac100"
#define GMAC_ETHTOOL_NAME "st_gmac"
#define XGMAC_ETHTOOL_NAME "st_xgmac"
+/* Same as DMA_CHAN_BASE_ADDR defined in dwmac4_dma.h
+ *
+ * It is here because dwmac_dma.h and dwmac4_dam.h can not be included at the
+ * same time due to the conflicting macro names.
+ */
+#define GMAC4_DMA_CHAN_BASE_ADDR 0x00001100
+
#define ETHTOOL_DMA_OFFSET 55
struct stmmac_stats {
@@ -434,6 +442,8 @@ static int stmmac_ethtool_get_regs_len(struct net_device *dev)
if (priv->plat->has_xgmac)
return XGMAC_REGSIZE * 4;
+ else if (priv->plat->has_gmac4)
+ return GMAC4_REG_SPACE_SIZE;
return REG_SPACE_SIZE;
}
@@ -446,8 +456,13 @@ static void stmmac_ethtool_gregs(struct net_device *dev,
stmmac_dump_mac_regs(priv, priv->hw, reg_space);
stmmac_dump_dma_regs(priv, priv->ioaddr, reg_space);
- if (!priv->plat->has_xgmac) {
- /* Copy DMA registers to where ethtool expects them */
+ /* Copy DMA registers to where ethtool expects them */
+ if (priv->plat->has_gmac4) {
+ /* GMAC4 dumps its DMA registers at its DMA_CHAN_BASE_ADDR */
+ memcpy(®_space[ETHTOOL_DMA_OFFSET],
+ ®_space[GMAC4_DMA_CHAN_BASE_ADDR / 4],
+ NUM_DWMAC4_DMA_REGS * 4);
+ } else if (!priv->plat->has_xgmac) {
memcpy(®_space[ETHTOOL_DMA_OFFSET],
®_space[DMA_BUS_MODE / 4],
NUM_DWMAC1000_DMA_REGS * 4);
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] net: stmmac: dump gmac4 DMA registers correctly
2022-01-28 15:36 Camel Guo
@ 2022-01-28 22:29 ` Jakub Kicinski
0 siblings, 0 replies; 3+ messages in thread
From: Jakub Kicinski @ 2022-01-28 22:29 UTC (permalink / raw)
To: Camel Guo
Cc: Giuseppe Cavallaro, Alexandre Torgue, Jose Abreu, David S. Miller,
Maxime Coquelin, kernel, Camel Guo, netdev, linux-stm32,
linux-arm-kernel, linux-kernel
On Fri, 28 Jan 2022 16:36:42 +0100 Camel Guo wrote:
> From: Camel Guo <camelg@axis.com>
>
> Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are
> located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump
> gmac4 DMA registers correctly, this commit checks if a net_device has
> gmac4 and uses different logic to dump its DMA registers.
>
> This fixes the following KASAN warning, which can normally be triggered
> by a command similar like "ethtool -d eth0":
>
> BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30
> Write of size 4 at addr ffffffc010177100 by task ethtool/1839
> kasan_report+0x200/0x21c
> __asan_report_store4_noabort+0x34/0x60
> dwmac4_dump_dma_regs+0x6d4/0xb30
> stmmac_ethtool_gregs+0x110/0x204
> ethtool_get_regs+0x200/0x4b0
> dev_ethtool+0x1dac/0x3800
> dev_ioctl+0x7c0/0xb50
> sock_ioctl+0x298/0x6c4
> ...
>
> Signed-off-by: Camel Guo <camelg@axis.com>
Can we get a Fixes tag for this? If it was always broken the Fixes tag
should point to the commit which added gmac4 support.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH] net: stmmac: dump gmac4 DMA registers correctly
@ 2022-01-31 8:37 Camel Guo
0 siblings, 0 replies; 3+ messages in thread
From: Camel Guo @ 2022-01-31 8:37 UTC (permalink / raw)
To: Giuseppe Cavallaro, Alexandre Torgue, Jose Abreu, David S. Miller,
Jakub Kicinski, Maxime Coquelin
Cc: kernel, Camel Guo, LABBE Corentin, netdev, linux-stm32,
linux-arm-kernel, linux-kernel
From: Camel Guo <camelg@axis.com>
Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are
located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump
gmac4 DMA registers correctly, this commit checks if a net_device has
gmac4 and uses different logic to dump its DMA registers.
This fixes the following KASAN warning, which can normally be triggered
by a command similar like "ethtool -d eth0":
BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30
Write of size 4 at addr ffffffc010177100 by task ethtool/1839
kasan_report+0x200/0x21c
__asan_report_store4_noabort+0x34/0x60
dwmac4_dump_dma_regs+0x6d4/0xb30
stmmac_ethtool_gregs+0x110/0x204
ethtool_get_regs+0x200/0x4b0
dev_ethtool+0x1dac/0x3800
dev_ioctl+0x7c0/0xb50
sock_ioctl+0x298/0x6c4
...
Fixes: fbf68229ffe7 ("net: stmmac: unify registers dumps methods")
Signed-off-by: Camel Guo <camelg@axis.com>
---
.../net/ethernet/stmicro/stmmac/dwmac_dma.h | 1 +
.../ethernet/stmicro/stmmac/stmmac_ethtool.c | 19 +++++++++++++++++--
2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
index 1914ad698cab..acd70b9a3173 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
@@ -150,6 +150,7 @@
#define NUM_DWMAC100_DMA_REGS 9
#define NUM_DWMAC1000_DMA_REGS 23
+#define NUM_DWMAC4_DMA_REGS 27
void dwmac_enable_dma_transmission(void __iomem *ioaddr);
void dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index 164dff5ec32e..abfb3cd5958d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -21,10 +21,18 @@
#include "dwxgmac2.h"
#define REG_SPACE_SIZE 0x1060
+#define GMAC4_REG_SPACE_SIZE 0x116C
#define MAC100_ETHTOOL_NAME "st_mac100"
#define GMAC_ETHTOOL_NAME "st_gmac"
#define XGMAC_ETHTOOL_NAME "st_xgmac"
+/* Same as DMA_CHAN_BASE_ADDR defined in dwmac4_dma.h
+ *
+ * It is here because dwmac_dma.h and dwmac4_dam.h can not be included at the
+ * same time due to the conflicting macro names.
+ */
+#define GMAC4_DMA_CHAN_BASE_ADDR 0x00001100
+
#define ETHTOOL_DMA_OFFSET 55
struct stmmac_stats {
@@ -434,6 +442,8 @@ static int stmmac_ethtool_get_regs_len(struct net_device *dev)
if (priv->plat->has_xgmac)
return XGMAC_REGSIZE * 4;
+ else if (priv->plat->has_gmac4)
+ return GMAC4_REG_SPACE_SIZE;
return REG_SPACE_SIZE;
}
@@ -446,8 +456,13 @@ static void stmmac_ethtool_gregs(struct net_device *dev,
stmmac_dump_mac_regs(priv, priv->hw, reg_space);
stmmac_dump_dma_regs(priv, priv->ioaddr, reg_space);
- if (!priv->plat->has_xgmac) {
- /* Copy DMA registers to where ethtool expects them */
+ /* Copy DMA registers to where ethtool expects them */
+ if (priv->plat->has_gmac4) {
+ /* GMAC4 dumps its DMA registers at its DMA_CHAN_BASE_ADDR */
+ memcpy(®_space[ETHTOOL_DMA_OFFSET],
+ ®_space[GMAC4_DMA_CHAN_BASE_ADDR / 4],
+ NUM_DWMAC4_DMA_REGS * 4);
+ } else if (!priv->plat->has_xgmac) {
memcpy(®_space[ETHTOOL_DMA_OFFSET],
®_space[DMA_BUS_MODE / 4],
NUM_DWMAC1000_DMA_REGS * 4);
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-01-31 8:39 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-01-31 8:37 [PATCH] net: stmmac: dump gmac4 DMA registers correctly Camel Guo
-- strict thread matches above, loose matches on Subject: below --
2022-01-28 15:36 Camel Guo
2022-01-28 22:29 ` Jakub Kicinski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).