* [PATCH v2] ARM: dts: imx: Add missing LVDS decoder on M53Menlo
@ 2022-02-06 22:11 Marek Vasut
2022-02-12 6:05 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Marek Vasut @ 2022-02-06 22:11 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: Marek Vasut, Shawn Guo, Fabio Estevam, NXP Linux Team
The M53Menlo display unit uses an LVDS-to-DPI bridge, TI DS90CF364A.
Describe this bridge in DT, otherwise the DT incorrectly describes
DPI panel attached directly to LVDS source.
Fixes: 716be61d1869 ("ARM: dts: imx53: Add Menlosystems M53 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
---
V2: Add newlines
---
arch/arm/boot/dts/imx53-m53menlo.dts | 29 ++++++++++++++++++++++++++--
1 file changed, 27 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
index 4f88e96d81ddb..d5c68d1ea707c 100644
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -53,6 +53,31 @@ eth {
};
};
+ lvds-decoder {
+ compatible = "ti,ds90cf364a", "lvds-decoder";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds_decoder_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lvds_decoder_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+
panel {
compatible = "edt,etm0700g0dh6";
pinctrl-0 = <&pinctrl_display_gpio>;
@@ -61,7 +86,7 @@ panel {
port {
panel_in: endpoint {
- remote-endpoint = <&lvds0_out>;
+ remote-endpoint = <&lvds_decoder_out>;
};
};
};
@@ -450,7 +475,7 @@ port@2 {
reg = <2>;
lvds0_out: endpoint {
- remote-endpoint = <&panel_in>;
+ remote-endpoint = <&lvds_decoder_in>;
};
};
};
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] ARM: dts: imx: Add missing LVDS decoder on M53Menlo
2022-02-06 22:11 [PATCH v2] ARM: dts: imx: Add missing LVDS decoder on M53Menlo Marek Vasut
@ 2022-02-12 6:05 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2022-02-12 6:05 UTC (permalink / raw)
To: Marek Vasut; +Cc: linux-arm-kernel, Fabio Estevam, NXP Linux Team
On Sun, Feb 06, 2022 at 11:11:23PM +0100, Marek Vasut wrote:
> The M53Menlo display unit uses an LVDS-to-DPI bridge, TI DS90CF364A.
> Describe this bridge in DT, otherwise the DT incorrectly describes
> DPI panel attached directly to LVDS source.
>
> Fixes: 716be61d1869 ("ARM: dts: imx53: Add Menlosystems M53 board")
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: NXP Linux Team <linux-imx@nxp.com>
Applied, thanks!
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-02-12 6:07 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-02-06 22:11 [PATCH v2] ARM: dts: imx: Add missing LVDS decoder on M53Menlo Marek Vasut
2022-02-12 6:05 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).