From: Shawn Guo <shawnguo@kernel.org>
To: Richard Zhu <hongxing.zhu@nxp.com>
Cc: l.stach@pengutronix.de, bhelgaas@google.com,
lorenzo.pieralisi@arm.com, linux-pci@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
linux-imx@nxp.com
Subject: Re: [PATCH v3 1/2] ARM: dts: imx6qp-sabresd: Enable PCIe support
Date: Mon, 21 Feb 2022 12:20:08 +0800 [thread overview]
Message-ID: <20220221042008.GL2249@dragon> (raw)
In-Reply-To: <1644902192-12957-1-git-send-email-hongxing.zhu@nxp.com>
On Tue, Feb 15, 2022 at 01:16:31PM +0800, Richard Zhu wrote:
> In the i.MX6QP sabresd board(sch-28857) design, one external oscillator
> is powered up by vgen3 and used as the PCIe reference clock source by
> the endpoint device.
>
> If RC uses this oscillator as reference clock too, PLL6(ENET PLL) would
> has to be in bypass mode, and ENET clocks would be messed up.
>
> To keep things simple, let RC use the internal PLL as reference clock
> and set vgen3 always on to enable the external oscillator for endpoint
> device on i.MX6QP sabresd board.
>
> NOTE: This reference clock setup is used to pass the GEN2 TX compliance
> tests, and isn't recommended as a setup in the end-user design.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
> arch/arm/boot/dts/imx6qp-sabresd.dts | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
> index 480e73183f6b..083cf90bcab5 100644
> --- a/arch/arm/boot/dts/imx6qp-sabresd.dts
> +++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
> @@ -50,8 +50,14 @@ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
> };
> };
>
> +&vgen3_reg {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
These can be saved, as they are unchanged?
Shawn
> + regulator-always-on;
> +};
> +
> &pcie {
> - status = "disabled";
> + status = "okay";
> };
>
> &sata {
> --
> 2.25.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-02-21 4:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-15 5:16 [PATCH v3 1/2] ARM: dts: imx6qp-sabresd: Enable PCIe support Richard Zhu
2022-02-15 5:16 ` [PATCH v3 2/2] PCI: imx6: Enable i.MX6QP PCIe power management support Richard Zhu
2022-02-21 4:20 ` Shawn Guo [this message]
2022-02-21 6:26 ` [PATCH v3 1/2] ARM: dts: imx6qp-sabresd: Enable PCIe support Hongxing Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220221042008.GL2249@dragon \
--to=shawnguo@kernel.org \
--cc=bhelgaas@google.com \
--cc=hongxing.zhu@nxp.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox