From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 40F65C433FE for ; Fri, 25 Feb 2022 09:23:12 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:In-Reply-To:MIME-Version:References: Message-ID:Subject:CC:To:From:Date:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=+1ONKws+hk6bJRpNZYTSXQ7WM4M7fruV1DFGt4QnhQM=; b=fzBl/VayEW/y8v doqGzcOmGi6K3CACGY0S4QrLqjkFVEJVJk3DN85tIEohJgU6nh/yp40RSmjclwtLtau02HdRQ2ESP /c/AtYrGeZJUTEiRL8Z8GdJIR/6omm+7D8LG7XZxwWZ+BIiV9Gej//ttDJhg+YmRDJQqqr40v2Bmc MKdPaaNN8yDRp1Yy+OKqPMqGD2kd06S0LRZ9Hd/ad0b36FvQGwJ4CEAWmasOahv7ZE08znzug+yfH h3iuwjIlYwEBjrZMemDbnW4DvEltkmTJDBjpnSs4C6K2NfBOUmFFckV8zdTRurl84NxoR5o8sXzzX AZHT2vpmlhnq0IkAbjnQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1nNWnQ-0047tp-ON; Fri, 25 Feb 2022 09:21:53 +0000 Received: from esa.microchip.iphmx.com ([68.232.154.123]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1nNWnL-0047s9-0s for linux-arm-kernel@lists.infradead.org; Fri, 25 Feb 2022 09:21:49 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1645780908; x=1677316908; h=date:from:to:cc:subject:message-id:references: mime-version:in-reply-to; bh=89kyyoJndWkPE14LCwoliaBF7EKo8CRJ7OCVP+vfOMA=; b=yGXjCDd34kj7cvOdEEoRI+ny7u2L8ZmI0acNg7URUza4J/OKejoFk02I tdbhiQOwEj2d3vCk3hyPaedwgkGY2u+XXryWWhTbnywhXqsRZHY1EFkbi HP8YoPny0EaUoaHRxq/Nep/VmV8bujhe60YXtzwzLGUOsID400t51OfFd Dva13f4CYiB88eBk6w7MY+6iWjJlClSh2DkKCI2ZR62BgMw3PNqHT6mUh Xxdn2/IEkB2w4xvA8S5rP9INC5NehX0e3rkeiv+CB+oEvztiXm2betRF7 PkeYZ9Iu7JtAWIMUBdxtxlF89b6yuixp3cDrs4OkM6REXw3UEeB0gDHn9 w==; X-IronPort-AV: E=Sophos;i="5.90,136,1643698800"; d="scan'208";a="147261782" Received: from smtpout.microchip.com (HELO email.microchip.com) ([198.175.253.82]) by esa4.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 25 Feb 2022 02:21:45 -0700 Received: from chn-vm-ex01.mchp-main.com (10.10.85.143) by chn-vm-ex02.mchp-main.com (10.10.85.144) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2375.17; Fri, 25 Feb 2022 02:21:43 -0700 Received: from localhost (10.10.115.15) by chn-vm-ex01.mchp-main.com (10.10.85.143) with Microsoft SMTP Server id 15.1.2375.17 via Frontend Transport; Fri, 25 Feb 2022 02:21:43 -0700 Date: Fri, 25 Feb 2022 10:24:27 +0100 From: Horatiu Vultur To: Michael Walle CC: Lars Povlsen , Steen Hegelund , Linus Walleij , , , , , Colin Foster Subject: Re: [PATCH v1 5/5] pinctrl: microchip-sgpio: wait until output is actually set Message-ID: <20220225092427.jjilv3qo52crsmuw@soft-dev3-1.localhost> References: <20220224161021.2197263-1-michael@walle.cc> <20220224161021.2197263-6-michael@walle.cc> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20220224161021.2197263-6-michael@walle.cc> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220225_012147_260652_FE7A3263 X-CRM114-Status: GOOD ( 38.05 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org The 02/24/2022 17:10, Michael Walle wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe Hi Michael, > > Right now, when a gpio value is set, the actual hardware pin gets set > asynchronously. When linux write the output register, it takes some time > until it is actually propagated to the output shift registers. If that > output port is connected to an I2C mux for example, the linux driver > assumes the I2C bus is already switched although it is not. > > Fortunately, there is a single shot mode with a feedback: you can > trigger the single shot and the hardware will clear that bit once it has > finished the clocking and strobed the load signal of the shift > registers. This can take a considerable amount of time though. > Measuremens have shown that it takes up to a whole burst cycle gap which > is about 50ms on the largest setting. Therefore, we have to mark the > output bank as sleepable. To avoid unnecessary waiting, just trigger the > single shot if the value was actually changed. I have tested this patch series on our lan9668 board and it worked fine. Thanks! I just have few questions: 1. What about other boards/chips that have this sgpio, do they have also the same issue? Because from what I recall on sparx5 they don't have this issue. I have seen it only on lan9668. 2. I remember that I have tried to fix this issue like this [1], but unfortunetly that was never accepted. Is this something that is worth at looking at? [1] https://patchwork.ozlabs.org/project/linux-i2c/patch/20211103091839.1665672-3-horatiu.vultur@microchip.com/ > > Signed-off-by: Michael Walle > --- > drivers/pinctrl/pinctrl-microchip-sgpio.c | 58 ++++++++++++++++++++++- > 1 file changed, 57 insertions(+), 1 deletion(-) > > diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c > index 3f3b8c482f3a..768b69929c99 100644 > --- a/drivers/pinctrl/pinctrl-microchip-sgpio.c > +++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c > @@ -69,6 +69,7 @@ struct sgpio_properties { > #define SGPIO_OCELOT_BIT_SOURCE GENMASK(23, 12) > > #define SGPIO_SPARX5_AUTO_REPEAT BIT(6) > +#define SGPIO_SPARX5_SINGLE_SHOT BIT(7) > #define SGPIO_SPARX5_PORT_WIDTH GENMASK(4, 3) > #define SGPIO_SPARX5_CLK_FREQ GENMASK(19, 8) > #define SGPIO_SPARX5_BIT_SOURCE GENMASK(23, 12) > @@ -118,6 +119,8 @@ struct sgpio_priv { > struct regmap *regs; > const struct sgpio_properties *properties; > spinlock_t lock; > + /* protects the config register and single shot mode */ > + struct mutex poll_lock; > }; > > struct sgpio_port_addr { > @@ -225,12 +228,54 @@ static inline void sgpio_configure_clock(struct sgpio_priv *priv, u32 clkfrq) > sgpio_clrsetbits(priv, REG_SIO_CLOCK, 0, clr, set); > } > > +static int sgpio_single_shot(struct sgpio_priv *priv) > +{ > + u32 addr = sgpio_get_addr(priv, REG_SIO_CONFIG, 0); > + int ret, ret2; > + u32 ctrl; > + > + /* Only supported on SparX-5 for now. */ > + if (priv->properties->arch != SGPIO_ARCH_SPARX5) > + return 0; > + > + /* > + * Trigger immediate burst. This only works when auto repeat is turned > + * off. Otherwise, the single shot bit will never be cleared by the > + * hardware. Measurements showed that an update might take as long as > + * the burst gap. On a LAN9668 this is about 50ms for the largest > + * setting. > + * After the manual burst, reenable the auto repeat mode again. > + */ > + mutex_lock(&priv->poll_lock); > + ret = regmap_update_bits(priv->regs, addr, > + SGPIO_SPARX5_SINGLE_SHOT | SGPIO_SPARX5_AUTO_REPEAT, > + SGPIO_SPARX5_SINGLE_SHOT); > + if (ret) > + goto out; > + > + ret = regmap_read_poll_timeout(priv->regs, addr, ctrl, > + !(ctrl & SGPIO_SPARX5_SINGLE_SHOT), > + 100, 60000); > + > + /* reenable auto repeat mode even if there was an error */ > + ret2 = regmap_update_bits(priv->regs, addr, > + SGPIO_SPARX5_AUTO_REPEAT, > + SGPIO_SPARX5_AUTO_REPEAT); > +out: > + mutex_unlock(&priv->poll_lock); > + > + return ret ?: ret2; > +} > + > static int sgpio_output_set(struct sgpio_priv *priv, > struct sgpio_port_addr *addr, > int value) > { > unsigned int bit = SGPIO_SRC_BITS * addr->bit; > + u32 reg = sgpio_get_addr(priv, REG_PORT_CONFIG, addr->port); > + bool changed; > u32 clr, set; > + int ret; > > switch (priv->properties->arch) { > case SGPIO_ARCH_LUTON: > @@ -249,7 +294,16 @@ static int sgpio_output_set(struct sgpio_priv *priv, > return -EINVAL; > } > > - sgpio_clrsetbits(priv, REG_PORT_CONFIG, addr->port, clr, set); > + ret = regmap_update_bits_check(priv->regs, reg, clr | set, set, > + &changed); > + if (ret) > + return ret; > + > + if (changed) { > + ret = sgpio_single_shot(priv); > + if (ret) > + return ret; > + } > > return 0; > } > @@ -788,6 +842,7 @@ static int microchip_sgpio_register_bank(struct device *dev, > gc->of_gpio_n_cells = 3; > gc->base = -1; > gc->ngpio = ngpios; > + gc->can_sleep = !bank->is_input; > > if (bank->is_input && priv->properties->flags & SGPIO_FLAGS_HAS_IRQ) { > int irq = fwnode_irq_get(fwnode, 0); > @@ -848,6 +903,7 @@ static int microchip_sgpio_probe(struct platform_device *pdev) > > priv->dev = dev; > spin_lock_init(&priv->lock); > + mutex_init(&priv->poll_lock); > > reset = devm_reset_control_get_optional_shared(&pdev->dev, "switch"); > if (IS_ERR(reset)) > -- > 2.30.2 > -- /Horatiu _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel