linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Abel Vesa <abel.vesa@nxp.com>, Shawn Guo <shawnguo@kernel.org>,
	Sasha Levin <sashal@kernel.org>,
	kernel@pengutronix.de, robh+dt@kernel.org, mark.rutland@arm.com,
	linux@armlinux.org.uk, linux-arm-kernel@lists.infradead.org,
	devicetree@vger.kernel.org
Subject: [PATCH AUTOSEL 5.17 25/66] ARM: dts: imx7: Use audio_mclk_post_div instead audio_mclk_root_clk
Date: Wed, 30 Mar 2022 07:46:04 -0400	[thread overview]
Message-ID: <20220330114646.1669334-25-sashal@kernel.org> (raw)
In-Reply-To: <20220330114646.1669334-1-sashal@kernel.org>

From: Abel Vesa <abel.vesa@nxp.com>

[ Upstream commit 4cb7df64c732b2b9918424095c11660c2a8c4a33 ]

The audio_mclk_root_clk was added as a gate with the CCGR121 (0x4790),
but according to the reference manual, there is no such gate. Moreover,
the consumer driver of the mentioned clock might gate it and leave
the ECSPI2 (the true owner of that gate) hanging. So lets use the
audio_mclk_post_div, which is the parent.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx7-colibri.dtsi     | 4 ++--
 arch/arm/boot/dts/imx7-mba7.dtsi        | 2 +-
 arch/arm/boot/dts/imx7d-nitrogen7.dts   | 2 +-
 arch/arm/boot/dts/imx7d-pico-hobbit.dts | 4 ++--
 arch/arm/boot/dts/imx7d-pico-pi.dts     | 4 ++--
 arch/arm/boot/dts/imx7d-sdb.dts         | 4 ++--
 arch/arm/boot/dts/imx7s-warp.dts        | 4 ++--
 7 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 62b771c1d5a9..f1c60b0cb143 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -40,7 +40,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -293,7 +293,7 @@
 		compatible = "fsl,sgtl5000";
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sai1_mclk>;
 		VDDA-supply = <&reg_module_3v3_avdd>;
diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi
index 49086c6b6a0a..3df6dff7734a 100644
--- a/arch/arm/boot/dts/imx7-mba7.dtsi
+++ b/arch/arm/boot/dts/imx7-mba7.dtsi
@@ -302,7 +302,7 @@
 	tlv320aic32x4: audio-codec@18 {
 		compatible = "ti,tlv320aic32x4";
 		reg = <0x18>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		ldoin-supply = <&reg_audio_3v3>;
 		iov-supply = <&reg_audio_3v3>;
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index e0751e6ba3c0..a31de900139d 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -288,7 +288,7 @@
 	codec: wm8960@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		wlf,shared-lrclk;
 	};
diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
index 7b2198a9372c..d917dc4f2f22 100644
--- a/arch/arm/boot/dts/imx7d-pico-hobbit.dts
+++ b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
@@ -31,7 +31,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -41,7 +41,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_vref_1v8>;
 	};
diff --git a/arch/arm/boot/dts/imx7d-pico-pi.dts b/arch/arm/boot/dts/imx7d-pico-pi.dts
index 70bea95c06d8..f263e391e24c 100644
--- a/arch/arm/boot/dts/imx7d-pico-pi.dts
+++ b/arch/arm/boot/dts/imx7d-pico-pi.dts
@@ -31,7 +31,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -41,7 +41,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_vref_1v8>;
 	};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 7813ef960f6e..f053f5122741 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -385,14 +385,14 @@
 	codec: wm8960@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		wlf,shared-lrclk;
 		wlf,hp-cfg = <2 2 3>;
 		wlf,gpio-cfg = <1 3>;
 		assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
 				  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
-				  <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+				  <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
 		assigned-clock-rates = <0>, <884736000>, <12288000>;
 	};
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index 4f1edef06c92..e8734d218b9d 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -75,7 +75,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -232,7 +232,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sai1_mclk>;
 		VDDA-supply = <&vgen4_reg>;
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-03-30 11:52 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20220330114646.1669334-1-sashal@kernel.org>
2022-03-30 11:45 ` [PATCH AUTOSEL 5.17 11/66] media: iommu/mediatek-v1: Free the existed fwspec if the master dev already has Sasha Levin
2022-03-30 11:45 ` [PATCH AUTOSEL 5.17 12/66] media: iommu/mediatek: Return ENODEV if the device is NULL Sasha Levin
2022-03-30 11:45 ` [PATCH AUTOSEL 5.17 13/66] media: iommu/mediatek: Add device_link between the consumer and the larb devices Sasha Levin
2022-03-30 11:45 ` [PATCH AUTOSEL 5.17 18/66] ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960 Sasha Levin
2022-03-30 11:45 ` [PATCH AUTOSEL 5.17 19/66] ARM: dts: bcm2837: Add the missing L1/L2 cache information Sasha Levin
2022-03-30 11:46 ` [PATCH AUTOSEL 5.17 23/66] ARM: ftrace: avoid redundant loads or clobbering IP Sasha Levin
2022-03-30 11:46 ` Sasha Levin [this message]
2022-03-30 11:46 ` [PATCH AUTOSEL 5.17 26/66] arm64: defconfig: build imx-sdma as a module Sasha Levin
2022-03-30 11:46 ` [PATCH AUTOSEL 5.17 30/66] ARM: dts: bcm2711: Add the missing L1/L2 cache information Sasha Levin
2022-03-30 11:46 ` [PATCH AUTOSEL 5.17 40/66] ARM: tegra: transformer: Drop reg-shift for Tegra HS UART Sasha Levin
2022-03-30 11:46 ` [PATCH AUTOSEL 5.17 41/66] uaccess: fix type mismatch warnings from access_ok() Sasha Levin
2022-03-30 11:46 ` [PATCH AUTOSEL 5.17 43/66] ARM: tegra: tamonten: Fix I2C3 pad setting Sasha Levin
2022-03-30 11:46 ` [PATCH AUTOSEL 5.17 44/66] ARM: mmp: Fix failure to remove sram device Sasha Levin
2022-03-30 11:46 ` [PATCH AUTOSEL 5.17 63/66] ASoC: mediatek: Fix error handling in mt8183_da7219_max98357_dev_probe Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220330114646.1669334-25-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=abel.vesa@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).