[RESEND v2 0/2] Add support for MediaTek PMIC MT6366

[RESEND v2 0/2] Add support for MediaTek PMIC MT6366

[Johnson Wang]

This patchset adds support for MediaTek PMIC MT6366.
MT6366 is the primary PMIC for MT8186 and probably other SOCs.

Resend v2:
- rebase on Linux 5.17

Changes in v2:
- rebase on Linux 5.17-rc8
- change subject line

Johnson Wang (2):
  regulator: mt6366: Add support for MT6366 regulator
  dt-bindings: regulator: Add BUCK and LDO document for MT6358 and
    MT6366

 .../bindings/regulator/mt6358-regulator.txt   |  22 +-
 drivers/regulator/mt6358-regulator.c          | 213 +++++++++++++++++-
 include/linux/regulator/mt6358-regulator.h    |  45 ++++
 3 files changed, 270 insertions(+), 10 deletions(-)

-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[RESEND v2 1/2] regulator: mt6366: Add support for MT6366 regulator

[Johnson Wang]

The MT6366 is a regulator found on boards based on MediaTek MT8186 and
probably other SoCs. It is a so called pmic and connects as a slave to
SoC using SPI, wrapped inside the pmic-wrapper.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
---
 drivers/regulator/mt6358-regulator.c       | 213 ++++++++++++++++++++-
 include/linux/regulator/mt6358-regulator.h |  45 +++++
 2 files changed, 253 insertions(+), 5 deletions(-)

diff --git a/drivers/regulator/mt6358-regulator.c b/drivers/regulator/mt6358-regulator.c
index eb8027813b99..8a5ce990f1bf 100644
--- a/drivers/regulator/mt6358-regulator.c
+++ b/drivers/regulator/mt6358-regulator.c
@@ -130,6 +130,102 @@ struct mt6358_regulator_info {
 	.qi = BIT(15),							\
 }
 
+#define MT6366_BUCK(match, vreg, min, max, step,		\
+	volt_ranges, vosel_mask, _da_vsel_reg, _da_vsel_mask,	\
+	_modeset_reg, _modeset_shift)		\
+[MT6366_ID_##vreg] = {	\
+	.desc = {	\
+		.name = #vreg,	\
+		.of_match = of_match_ptr(match),	\
+		.ops = &mt6358_volt_range_ops,	\
+		.type = REGULATOR_VOLTAGE,	\
+		.id = MT6366_ID_##vreg,		\
+		.owner = THIS_MODULE,		\
+		.n_voltages = ((max) - (min)) / (step) + 1,	\
+		.linear_ranges = volt_ranges,		\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),	\
+		.vsel_reg = MT6358_BUCK_##vreg##_ELR0,	\
+		.vsel_mask = vosel_mask,	\
+		.enable_reg = MT6358_BUCK_##vreg##_CON0,	\
+		.enable_mask = BIT(0),	\
+		.of_map_mode = mt6358_map_mode,	\
+	},	\
+	.status_reg = MT6358_BUCK_##vreg##_DBG1,	\
+	.qi = BIT(0),	\
+	.da_vsel_reg = _da_vsel_reg,	\
+	.da_vsel_mask = _da_vsel_mask,	\
+	.modeset_reg = _modeset_reg,	\
+	.modeset_mask = BIT(_modeset_shift),	\
+}
+
+#define MT6366_LDO(match, vreg, ldo_volt_table,	\
+	ldo_index_table, enreg, enbit, vosel,	\
+	vosel_mask)	\
+[MT6366_ID_##vreg] = {	\
+	.desc = {	\
+		.name = #vreg,	\
+		.of_match = of_match_ptr(match),	\
+		.ops = &mt6358_volt_table_ops,	\
+		.type = REGULATOR_VOLTAGE,	\
+		.id = MT6366_ID_##vreg,	\
+		.owner = THIS_MODULE,	\
+		.n_voltages = ARRAY_SIZE(ldo_volt_table),	\
+		.volt_table = ldo_volt_table,	\
+		.vsel_reg = vosel,	\
+		.vsel_mask = vosel_mask,	\
+		.enable_reg = enreg,	\
+		.enable_mask = BIT(enbit),	\
+	},	\
+	.status_reg = MT6358_LDO_##vreg##_CON1,	\
+	.qi = BIT(15),	\
+	.index_table = ldo_index_table,	\
+	.n_table = ARRAY_SIZE(ldo_index_table),	\
+}
+
+#define MT6366_LDO1(match, vreg, min, max, step,	\
+	volt_ranges, _da_vsel_reg, _da_vsel_mask,	\
+	vosel, vosel_mask)	\
+[MT6366_ID_##vreg] = {	\
+	.desc = {	\
+		.name = #vreg,	\
+		.of_match = of_match_ptr(match),	\
+		.ops = &mt6358_volt_range_ops,	\
+		.type = REGULATOR_VOLTAGE,	\
+		.id = MT6366_ID_##vreg,	\
+		.owner = THIS_MODULE,	\
+		.n_voltages = ((max) - (min)) / (step) + 1,	\
+		.linear_ranges = volt_ranges,	\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),	\
+		.vsel_reg = vosel,	\
+		.vsel_mask = vosel_mask,	\
+		.enable_reg = MT6358_LDO_##vreg##_CON0,	\
+		.enable_mask = BIT(0),	\
+	},	\
+	.da_vsel_reg = _da_vsel_reg,	\
+	.da_vsel_mask = _da_vsel_mask,	\
+	.status_reg = MT6358_LDO_##vreg##_DBG1,	\
+	.qi = BIT(0),	\
+}
+
+#define MT6366_REG_FIXED(match, vreg,	\
+	enreg, enbit, volt)	\
+[MT6366_ID_##vreg] = {	\
+	.desc = {	\
+		.name = #vreg,	\
+		.of_match = of_match_ptr(match),	\
+		.ops = &mt6358_volt_fixed_ops,	\
+		.type = REGULATOR_VOLTAGE,	\
+		.id = MT6366_ID_##vreg,	\
+		.owner = THIS_MODULE,	\
+		.n_voltages = 1,	\
+		.enable_reg = enreg,	\
+		.enable_mask = BIT(enbit),	\
+		.min_uV = volt,	\
+	},	\
+	.status_reg = MT6358_LDO_##vreg##_CON1,	\
+	.qi = BIT(15),							\
+}
+
 static const struct linear_range buck_volt_range1[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 6250),
 };
@@ -409,6 +505,9 @@ static struct mt6358_regulator_info mt6358_regulators[] = {
 	MT6358_BUCK("buck_vcore", VCORE, 500000, 1293750, 6250,
 		    buck_volt_range1, 0x7f, MT6358_BUCK_VCORE_DBG0, 0x7f,
 		    MT6358_VCORE_VGPU_ANA_CON0, 1),
+	MT6358_BUCK("buck_vcore_sshub", VCORE_SSHUB, 500000, 1293750, 6250,
+		    buck_volt_range1, 0x7f, MT6358_BUCK_VCORE_SSHUB_ELR0, 0x7f,
+		    MT6358_VCORE_VGPU_ANA_CON0, 1),
 	MT6358_BUCK("buck_vpa", VPA, 500000, 3650000, 50000,
 		    buck_volt_range3, 0x3f, MT6358_BUCK_VPA_DBG0, 0x3f,
 		    MT6358_VPA_ANA_CON0, 3),
@@ -488,6 +587,10 @@ static struct mt6358_regulator_info mt6358_regulators[] = {
 	MT6358_LDO1("ldo_vsram_others", VSRAM_OTHERS, 500000, 1293750, 6250,
 		    buck_volt_range1, MT6358_LDO_VSRAM_OTHERS_DBG0, 0x7f00,
 		    MT6358_LDO_VSRAM_CON2, 0x7f),
+	MT6358_LDO1("ldo_vsram_others_sshub", VSRAM_OTHERS_SSHUB, 500000,
+		    1293750, 6250, buck_volt_range1,
+		    MT6358_LDO_VSRAM_OTHERS_SSHUB_CON1, 0x7f,
+		    MT6358_LDO_VSRAM_OTHERS_SSHUB_CON1, 0x7f),
 	MT6358_LDO1("ldo_vsram_gpu", VSRAM_GPU, 500000, 1293750, 6250,
 		    buck_volt_range1, MT6358_LDO_VSRAM_GPU_DBG0, 0x7f00,
 		    MT6358_LDO_VSRAM_CON3, 0x7f),
@@ -496,24 +599,124 @@ static struct mt6358_regulator_info mt6358_regulators[] = {
 		    MT6358_LDO_VSRAM_CON1, 0x7f),
 };
 
+/* The array is indexed by id(MT6366_ID_XXX) */
+static struct mt6358_regulator_info mt6366_regulators[] = {
+	MT6366_BUCK("buck_vdram1", VDRAM1, 500000, 2087500, 12500,
+		    buck_volt_range2, 0x7f, MT6358_BUCK_VDRAM1_DBG0, 0x7f,
+		    MT6358_VDRAM1_ANA_CON0, 8),
+	MT6366_BUCK("buck_vcore", VCORE, 500000, 1293750, 6250,
+		    buck_volt_range1, 0x7f, MT6358_BUCK_VCORE_DBG0, 0x7f,
+		    MT6358_VCORE_VGPU_ANA_CON0, 1),
+	MT6366_BUCK("buck_vcore_sshub", VCORE_SSHUB, 500000, 1293750, 6250,
+		    buck_volt_range1, 0x7f, MT6358_BUCK_VCORE_SSHUB_ELR0, 0x7f,
+		    MT6358_VCORE_VGPU_ANA_CON0, 1),
+	MT6366_BUCK("buck_vpa", VPA, 500000, 3650000, 50000,
+		    buck_volt_range3, 0x3f, MT6358_BUCK_VPA_DBG0, 0x3f,
+		    MT6358_VPA_ANA_CON0, 3),
+	MT6366_BUCK("buck_vproc11", VPROC11, 500000, 1293750, 6250,
+		    buck_volt_range1, 0x7f, MT6358_BUCK_VPROC11_DBG0, 0x7f,
+		    MT6358_VPROC_ANA_CON0, 1),
+	MT6366_BUCK("buck_vproc12", VPROC12, 500000, 1293750, 6250,
+		    buck_volt_range1, 0x7f, MT6358_BUCK_VPROC12_DBG0, 0x7f,
+		    MT6358_VPROC_ANA_CON0, 2),
+	MT6366_BUCK("buck_vgpu", VGPU, 500000, 1293750, 6250,
+		    buck_volt_range1, 0x7f, MT6358_BUCK_VGPU_ELR0, 0x7f,
+		    MT6358_VCORE_VGPU_ANA_CON0, 2),
+	MT6366_BUCK("buck_vs2", VS2, 500000, 2087500, 12500,
+		    buck_volt_range2, 0x7f, MT6358_BUCK_VS2_DBG0, 0x7f,
+		    MT6358_VS2_ANA_CON0, 8),
+	MT6366_BUCK("buck_vmodem", VMODEM, 500000, 1293750, 6250,
+		    buck_volt_range1, 0x7f, MT6358_BUCK_VMODEM_DBG0, 0x7f,
+		    MT6358_VMODEM_ANA_CON0, 8),
+	MT6366_BUCK("buck_vs1", VS1, 1000000, 2587500, 12500,
+		    buck_volt_range4, 0x7f, MT6358_BUCK_VS1_DBG0, 0x7f,
+		    MT6358_VS1_ANA_CON0, 8),
+	MT6366_REG_FIXED("ldo_vrf12", VRF12,
+			 MT6358_LDO_VRF12_CON0, 0, 1200000),
+	MT6366_REG_FIXED("ldo_vio18", VIO18,
+			 MT6358_LDO_VIO18_CON0, 0, 1800000),
+	MT6366_REG_FIXED("ldo_vcn18", VCN18, MT6358_LDO_VCN18_CON0, 0, 1800000),
+	MT6366_REG_FIXED("ldo_vfe28", VFE28, MT6358_LDO_VFE28_CON0, 0, 2800000),
+	MT6366_REG_FIXED("ldo_vcn28", VCN28, MT6358_LDO_VCN28_CON0, 0, 2800000),
+	MT6366_REG_FIXED("ldo_vxo22", VXO22, MT6358_LDO_VXO22_CON0, 0, 2200000),
+	MT6366_REG_FIXED("ldo_vaux18", VAUX18,
+			 MT6358_LDO_VAUX18_CON0, 0, 1800000),
+	MT6366_REG_FIXED("ldo_vbif28", VBIF28,
+			 MT6358_LDO_VBIF28_CON0, 0, 2800000),
+	MT6366_REG_FIXED("ldo_vio28", VIO28, MT6358_LDO_VIO28_CON0, 0, 2800000),
+	MT6366_REG_FIXED("ldo_va12", VA12, MT6358_LDO_VA12_CON0, 0, 1200000),
+	MT6366_REG_FIXED("ldo_vrf18", VRF18, MT6358_LDO_VRF18_CON0, 0, 1800000),
+	MT6366_REG_FIXED("ldo_vaud28", VAUD28,
+			 MT6358_LDO_VAUD28_CON0, 0, 2800000),
+	MT6366_LDO("ldo_vdram2", VDRAM2, vdram2_voltages, vdram2_idx,
+		   MT6358_LDO_VDRAM2_CON0, 0, MT6358_LDO_VDRAM2_ELR0, 0x10),
+	MT6366_LDO("ldo_vsim1", VSIM1, vsim_voltages, vsim_idx,
+		   MT6358_LDO_VSIM1_CON0, 0, MT6358_VSIM1_ANA_CON0, 0xf00),
+	MT6366_LDO("ldo_vibr", VIBR, vibr_voltages, vibr_idx,
+		   MT6358_LDO_VIBR_CON0, 0, MT6358_VIBR_ANA_CON0, 0xf00),
+	MT6366_LDO("ldo_vusb", VUSB, vusb_voltages, vusb_idx,
+		   MT6358_LDO_VUSB_CON0_0, 0, MT6358_VUSB_ANA_CON0, 0x700),
+	MT6366_LDO("ldo_vefuse", VEFUSE, vefuse_voltages, vefuse_idx,
+		   MT6358_LDO_VEFUSE_CON0, 0, MT6358_VEFUSE_ANA_CON0, 0xf00),
+	MT6366_LDO("ldo_vmch", VMCH, vmch_vemc_voltages, vmch_vemc_idx,
+		   MT6358_LDO_VMCH_CON0, 0, MT6358_VMCH_ANA_CON0, 0x700),
+	MT6366_LDO("ldo_vemc", VEMC, vmch_vemc_voltages, vmch_vemc_idx,
+		   MT6358_LDO_VEMC_CON0, 0, MT6358_VEMC_ANA_CON0, 0x700),
+	MT6366_LDO("ldo_vcn33_bt", VCN33_BT, vcn33_bt_wifi_voltages,
+		   vcn33_bt_wifi_idx, MT6358_LDO_VCN33_CON0_0,
+		   0, MT6358_VCN33_ANA_CON0, 0x300),
+	MT6366_LDO("ldo_vcn33_wifi", VCN33_WIFI, vcn33_bt_wifi_voltages,
+		   vcn33_bt_wifi_idx, MT6358_LDO_VCN33_CON0_1,
+		   0, MT6358_VCN33_ANA_CON0, 0x300),
+	MT6366_LDO("ldo_vmc", VMC, vmc_voltages, vmc_idx,
+		   MT6358_LDO_VMC_CON0, 0, MT6358_VMC_ANA_CON0, 0xf00),
+	MT6366_LDO("ldo_vsim2", VSIM2, vsim_voltages, vsim_idx,
+		   MT6358_LDO_VSIM2_CON0, 0, MT6358_VSIM2_ANA_CON0, 0xf00),
+	MT6366_LDO1("ldo_vsram_proc11", VSRAM_PROC11, 500000, 1293750, 6250,
+		    buck_volt_range1, MT6358_LDO_VSRAM_PROC11_DBG0, 0x7f00,
+		    MT6358_LDO_VSRAM_CON0, 0x7f),
+	MT6366_LDO1("ldo_vsram_others", VSRAM_OTHERS, 500000, 1293750, 6250,
+		    buck_volt_range1, MT6358_LDO_VSRAM_OTHERS_DBG0, 0x7f00,
+		    MT6358_LDO_VSRAM_CON2, 0x7f),
+	MT6366_LDO1("ldo_vsram_others_sshub", VSRAM_OTHERS_SSHUB, 500000,
+		    1293750, 6250, buck_volt_range1,
+		    MT6358_LDO_VSRAM_OTHERS_SSHUB_CON1, 0x7f,
+		    MT6358_LDO_VSRAM_OTHERS_SSHUB_CON1, 0x7f),
+	MT6366_LDO1("ldo_vsram_gpu", VSRAM_GPU, 500000, 1293750, 6250,
+		    buck_volt_range1, MT6358_LDO_VSRAM_GPU_DBG0, 0x7f00,
+		    MT6358_LDO_VSRAM_CON3, 0x7f),
+	MT6366_LDO1("ldo_vsram_proc12", VSRAM_PROC12, 500000, 1293750, 6250,
+		    buck_volt_range1, MT6358_LDO_VSRAM_PROC12_DBG0, 0x7f00,
+		    MT6358_LDO_VSRAM_CON1, 0x7f),
+};
+
 static int mt6358_regulator_probe(struct platform_device *pdev)
 {
 	struct mt6397_chip *mt6397 = dev_get_drvdata(pdev->dev.parent);
 	struct regulator_config config = {};
 	struct regulator_dev *rdev;
-	int i;
+	struct mt6358_regulator_info *mt6358_info;
+	int i, max_regulator;
+
+	if (mt6397->chip_id == MT6366_CHIP_ID) {
+		max_regulator = MT6366_MAX_REGULATOR;
+		mt6358_info = mt6366_regulators;
+	} else {
+		max_regulator = MT6358_MAX_REGULATOR;
+		mt6358_info = mt6358_regulators;
+	}
 
-	for (i = 0; i < MT6358_MAX_REGULATOR; i++) {
+	for (i = 0; i < max_regulator; i++) {
 		config.dev = &pdev->dev;
-		config.driver_data = &mt6358_regulators[i];
+		config.driver_data = &mt6358_info[i];
 		config.regmap = mt6397->regmap;
 
 		rdev = devm_regulator_register(&pdev->dev,
-					       &mt6358_regulators[i].desc,
+					       &mt6358_info[i].desc,
 					       &config);
 		if (IS_ERR(rdev)) {
 			dev_err(&pdev->dev, "failed to register %s\n",
-				mt6358_regulators[i].desc.name);
+				mt6358_info[i].desc.name);
 			return PTR_ERR(rdev);
 		}
 	}
diff --git a/include/linux/regulator/mt6358-regulator.h b/include/linux/regulator/mt6358-regulator.h
index 1cc304946d09..bdcf83cd719e 100644
--- a/include/linux/regulator/mt6358-regulator.h
+++ b/include/linux/regulator/mt6358-regulator.h
@@ -48,9 +48,54 @@ enum {
 	MT6358_ID_VLDO28,
 	MT6358_ID_VAUD28,
 	MT6358_ID_VSIM2,
+	MT6358_ID_VCORE_SSHUB,
+	MT6358_ID_VSRAM_OTHERS_SSHUB,
 	MT6358_ID_RG_MAX,
 };
 
+enum {
+	MT6366_ID_VDRAM1 = 0,
+	MT6366_ID_VCORE,
+	MT6366_ID_VPA,
+	MT6366_ID_VPROC11,
+	MT6366_ID_VPROC12,
+	MT6366_ID_VGPU,
+	MT6366_ID_VS2,
+	MT6366_ID_VMODEM,
+	MT6366_ID_VS1,
+	MT6366_ID_VDRAM2,
+	MT6366_ID_VSIM1,
+	MT6366_ID_VIBR,
+	MT6366_ID_VRF12,
+	MT6366_ID_VIO18,
+	MT6366_ID_VUSB,
+	MT6366_ID_VCN18,
+	MT6366_ID_VFE28,
+	MT6366_ID_VSRAM_PROC11,
+	MT6366_ID_VCN28,
+	MT6366_ID_VSRAM_OTHERS,
+	MT6366_ID_VSRAM_GPU,
+	MT6366_ID_VXO22,
+	MT6366_ID_VEFUSE,
+	MT6366_ID_VAUX18,
+	MT6366_ID_VMCH,
+	MT6366_ID_VBIF28,
+	MT6366_ID_VSRAM_PROC12,
+	MT6366_ID_VEMC,
+	MT6366_ID_VIO28,
+	MT6366_ID_VA12,
+	MT6366_ID_VRF18,
+	MT6366_ID_VCN33_BT,
+	MT6366_ID_VCN33_WIFI,
+	MT6366_ID_VMC,
+	MT6366_ID_VAUD28,
+	MT6366_ID_VSIM2,
+	MT6366_ID_VCORE_SSHUB,
+	MT6366_ID_VSRAM_OTHERS_SSHUB,
+	MT6366_ID_RG_MAX,
+};
+
 #define MT6358_MAX_REGULATOR	MT6358_ID_RG_MAX
+#define MT6366_MAX_REGULATOR	MT6366_ID_RG_MAX
 
 #endif /* __LINUX_REGULATOR_MT6358_H */
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[RESEND v2 2/2] dt-bindings: regulator: Add BUCK and LDO document for MT6358 and MT6366

[Johnson Wang]

Add buck_vcore_sshub and ldo_vsram_others_sshub
regulators to binding document for MT6358 and MT6366.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
---
 .../bindings/regulator/mt6358-regulator.txt   | 22 ++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
index 9a90a92f2d7e..7034cdca54e0 100644
--- a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
@@ -8,14 +8,14 @@ Documentation/devicetree/bindings/regulator/regulator.txt.
 
 The valid names for regulators are::
 BUCK:
-  buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu,
-  buck_vs2, buck_vmodem, buck_vs1
+  buck_vdram1, buck_vcore, buck_vcore_sshub, buck_vpa, buck_vproc11,
+  buck_vproc12, buck_vgpu, buck_vs2, buck_vmodem, buck_vs1
 LDO:
   ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio,
   ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others,
-  ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28,
-  ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18,
-  ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28,
+  ldo_vsram_others_sshub, ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18,
+  ldo_vmch, ldo_vbif28, ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12,
+  ldo_vrf18, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28,
   ldo_vsim2
 
 Example:
@@ -354,5 +354,17 @@ Example:
 				regulator-max-microvolt = <3100000>;
 				regulator-enable-ramp-delay = <540>;
 			};
+
+			mt6358_vcore_sshub_reg: buck_vcore_sshub {
+				regulator-name = "vcore_sshub";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+			};
+
+			mt6358_vsram_others_sshub_reg: ldo_vsram_others_sshub {
+				regulator-name = "vsram_others_sshub";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+			};
 		};
 	};
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [RESEND v2 0/2] Add support for MediaTek PMIC MT6366

[Mark Brown]

On Fri, 1 Apr 2022 16:02:10 +0800, Johnson Wang wrote:
> This patchset adds support for MediaTek PMIC MT6366.
> MT6366 is the primary PMIC for MT8186 and probably other SOCs.
> 
> Resend v2:
> - rebase on Linux 5.17
> 
> Changes in v2:
> - rebase on Linux 5.17-rc8
> - change subject line
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/2] regulator: mt6366: Add support for MT6366 regulator
      commit: d077002c9d07dc6f64d07a362202a1e1081b2f6c
[2/2] dt-bindings: regulator: Add BUCK and LDO document for MT6358 and MT6366
      (no commit info)

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel