[PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe

From: Miaoqian Lin <linmq006@gmail.com>
To: Florian Fainelli <f.fainelli@gmail.com>,
	Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	bcm-kernel-feedback-list@broadcom.com,
	Nicolas Saenz Julienne <nsaenz@kernel.org>,
	Wolfram Sang <wsa@kernel.org>,
	Stefan Wahren <stefan.wahren@i2se.com>,
	Miaoqian Lin <linmq006@gmail.com>, Eric Anholt <eric@anholt.net>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	Annaliese McDermond <nh6z@nh6z.net>,
	linux-i2c@vger.kernel.org, linux-rpi-kernel@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe
Date: Sun,  3 Apr 2022 06:33:08 +0000	[thread overview]
Message-ID: <20220403063310.7525-1-linmq006@gmail.com> (raw)

In the error handling path, the clk_prepare_enable() function
call should be balanced by a corresponding 'clk_disable_unprepare()'
call. And clk_set_rate_exclusive calls clk_rate_exclusive_get(),
it should be balanced with call to clk_rate_exclusive_put().
, as already done in the remove function.

Fixes: bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
---
 drivers/i2c/busses/i2c-bcm2835.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index 5149454eef4a..d794448866a7 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -454,18 +454,21 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
 	ret = clk_prepare_enable(i2c_dev->bus_clk);
 	if (ret) {
 		dev_err(&pdev->dev, "Couldn't prepare clock");
-		return ret;
+		goto err_put_clk;
 	}
 
 	i2c_dev->irq = platform_get_irq(pdev, 0);
-	if (i2c_dev->irq < 0)
-		return i2c_dev->irq;
+	if (i2c_dev->irq < 0) {
+		ret =  i2c_dev->irq;
+		goto err_disable_clk;
+	}
 
 	ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED,
 			  dev_name(&pdev->dev), i2c_dev);
 	if (ret) {
 		dev_err(&pdev->dev, "Could not request IRQ\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_disable_clk;
 	}
 
 	adap = &i2c_dev->adapter;
@@ -489,8 +492,16 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
 
 	ret = i2c_add_adapter(adap);
 	if (ret)
-		free_irq(i2c_dev->irq, i2c_dev);
+		goto err_free_irq;
+
+	return ret;
 
+err_free_irq:
+	free_irq(i2c_dev->irq, i2c_dev);
+err_disable_clk:
+	clk_disable_unprepare(i2c_dev->bus_clk);
+err_put_clk:
+	clk_rate_exclusive_put(i2c_dev->bus_clk);
 	return ret;
 }
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
