[PATCH v6 31/34] iommu/mediatek: Get the proper bankid for multi banks

[Yong Wu <yong.wu@mediatek.com>]

We preassign some ports in a special bank via the new defined
banks_portmsk. Put it in the plat_data means it is not expected to be
adjusted dynamically.

If the iommu id in the iommu consumer's dtsi node is inside this
banks_portmsk, then we switch it to this special iommu bank, and
initialise the IOMMU bank HW.

Each a bank has the independent pgtable(4GB iova range). Each a bank
is a independent iommu domain/group. Currently we don't separate different
iova ranges inside a bank.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/iommu/mtk_iommu.c | 39 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 36 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 0828cff97625..d42b3d35a36e 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -191,6 +191,7 @@ struct mtk_iommu_plat_data {
 
 	u8                  banks_num;
 	bool                banks_enable[MTK_IOMMU_BANK_MAX];
+	unsigned int        banks_portmsk[MTK_IOMMU_BANK_MAX];
 	unsigned char       larbid_remap[MTK_LARB_COM_MAX][MTK_LARB_SUBCOM_MAX];
 };
 
@@ -467,6 +468,30 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static unsigned int mtk_iommu_get_bank_id(struct device *dev,
+					  const struct mtk_iommu_plat_data *plat_data)
+{
+	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	unsigned int i, portmsk = 0, bankid = 0;
+
+	if (plat_data->banks_num == 1)
+		return bankid;
+
+	for (i = 0; i < fwspec->num_ids; i++)
+		portmsk |= BIT(MTK_M4U_TO_PORT(fwspec->ids[i]));
+
+	for (i = 0; i < plat_data->banks_num && i < MTK_IOMMU_BANK_MAX; i++) {
+		if (!plat_data->banks_enable[i])
+			continue;
+
+		if (portmsk & plat_data->banks_portmsk[i]) {
+			bankid = i;
+			break;
+		}
+	}
+	return bankid; /* default is 0 */
+}
+
 static int mtk_iommu_get_iova_region_id(struct device *dev,
 					const struct mtk_iommu_plat_data *plat_data)
 {
@@ -619,13 +644,14 @@ static int mtk_iommu_attach_device(struct iommu_domain *domain,
 	struct list_head *hw_list = data->hw_list;
 	struct device *m4udev = data->dev;
 	struct mtk_iommu_bank_data *bank;
-	unsigned int bankid = 0;
+	unsigned int bankid;
 	int ret, region_id;
 
 	region_id = mtk_iommu_get_iova_region_id(dev, data->plat_data);
 	if (region_id < 0)
 		return region_id;
 
+	bankid = mtk_iommu_get_bank_id(dev, data->plat_data);
 	mutex_lock(&dom->mutex);
 	if (!dom->bank) {
 		/* Data is in the frstdata in sharing pgtable case. */
@@ -802,6 +828,7 @@ static struct iommu_group *mtk_iommu_device_group(struct device *dev)
 	struct mtk_iommu_data *c_data = dev_iommu_priv_get(dev), *data;
 	struct list_head *hw_list = c_data->hw_list;
 	struct iommu_group *group;
+	unsigned int bankid, groupid;
 	int regionid;
 
 	data = mtk_iommu_get_frst_data(hw_list);
@@ -812,12 +839,18 @@ static struct iommu_group *mtk_iommu_device_group(struct device *dev)
 	if (regionid < 0)
 		return ERR_PTR(regionid);
 
+	bankid = mtk_iommu_get_bank_id(dev, data->plat_data);
 	mutex_lock(&data->mutex);
-	group = data->m4u_group[regionid];
+	/*
+	 * If the bank function is enabled, each a bank is a iommu group/domain.
+	 * otherwise, each a iova region is a iommu group/domain.
+	 */
+	groupid = bankid ? bankid : regionid;
+	group = data->m4u_group[groupid];
 	if (!group) {
 		group = iommu_group_alloc();
 		if (!IS_ERR(group))
-			data->m4u_group[regionid] = group;
+			data->m4u_group[groupid] = group;
 	} else {
 		iommu_group_ref_get(group);
 	}
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel