Re: [PATCH v3 0/3] arm64: prepare and add verdin imx8m plus support

Shawn Guo
2022-04-11T02:16:52Z

On Fri, Apr 08, 2022 at 04:57:22PM +0200, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
>
> Add DMA properties to uart2 node of the base i.MX 8M Plus device tree,
> add toradex,verdin-imx8mp et al. to dt-bindings and finally, add
> initial support for Verdin iMX8M Plus.
>
> Changes in v3:
> - Add missing audio codec todo on development board as well.
> - Actually define scl/sda-gpios for Verdin I2C_2_DSI aka i2c2. Also
> pointed out by Laurent. Thanks!
> - Update PMIC LDO4 and I2C level shifter enablement comment.
> - Fix USDHC2_VSELECT sleep pinctrl value and add a comment.
> - Add comment about lowering frequency on Verdin I2C_2_DSI as suggested
> by Laurent.
> - Re-based on top of Shawn's latest for-next based on 5.18-rc1.
>
> Changes in v2:
> - Add Laurent's reviewed-by tag.
> - Add Krzysztof's reviewed-by tag.
> - Fix capitalisation of verdin in comments as reported by Laurent.
> - Add/modify todo comments as suggested by Laurent.
> - Add Laurent's reviewed- and tested-by tags.
>
> Marcel Ziswiler (3):
> arm64: dts: imx8mp: add uart2 dma
> dt-bindings: arm: fsl: add toradex,verdin-imx8mp et al.
> arm64: dts: freescale: add initial support for verdin imx8m plus

Applied all, thanks!