Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Samuel Holland <samuel@sholland.org>
To: Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Maxime Ripard <mripard@kernel.org>
Cc: Samuel Holland <samuel@sholland.org>,
	Daniel Vetter <daniel@ffwll.ch>, David Airlie <airlied@linux.ie>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	dri-devel@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@lists.linux.dev
Subject: [PATCH 3/6] drm/sun4i: sun8i-hdmi-phy: Used device-managed clocks/resets
Date: Mon, 11 Apr 2022 23:35:08 -0500	[thread overview]
Message-ID: <20220412043512.49364-4-samuel@sholland.org> (raw)
In-Reply-To: <20220412043512.49364-1-samuel@sholland.org>

Now that the HDMI PHY is using a platform driver, it can use device-
managed resources. Use these, as well as the dev_err_probe helper, to
simplify the probe function and get rid of the remove function.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 100 ++++++++-----------------
 1 file changed, 30 insertions(+), 70 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index 1effa30bfe62..1351e633d485 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -673,10 +673,8 @@ int sun8i_hdmi_phy_get(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
 static int sun8i_hdmi_phy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *node = dev->of_node;
 	struct sun8i_hdmi_phy *phy;
 	void __iomem *regs;
-	int ret;
 
 	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
 	if (!phy)
@@ -686,88 +684,50 @@ static int sun8i_hdmi_phy_probe(struct platform_device *pdev)
 	phy->dev = dev;
 
 	regs = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(regs)) {
-		dev_err(dev, "Couldn't map the HDMI PHY registers\n");
-		return PTR_ERR(regs);
-	}
+	if (IS_ERR(regs))
+		return dev_err_probe(dev, PTR_ERR(regs),
+				     "Couldn't map the HDMI PHY registers\n");
 
 	phy->regs = devm_regmap_init_mmio(dev, regs,
 					  &sun8i_hdmi_phy_regmap_config);
-	if (IS_ERR(phy->regs)) {
-		dev_err(dev, "Couldn't create the HDMI PHY regmap\n");
-		return PTR_ERR(phy->regs);
-	}
+	if (IS_ERR(phy->regs))
+		return dev_err_probe(dev, PTR_ERR(phy->regs),
+				     "Couldn't create the HDMI PHY regmap\n");
 
-	phy->clk_bus = of_clk_get_by_name(node, "bus");
-	if (IS_ERR(phy->clk_bus)) {
-		dev_err(dev, "Could not get bus clock\n");
-		return PTR_ERR(phy->clk_bus);
-	}
-
-	phy->clk_mod = of_clk_get_by_name(node, "mod");
-	if (IS_ERR(phy->clk_mod)) {
-		dev_err(dev, "Could not get mod clock\n");
-		ret = PTR_ERR(phy->clk_mod);
-		goto err_put_clk_bus;
-	}
+	phy->clk_bus = devm_clk_get(dev, "bus");
+	if (IS_ERR(phy->clk_bus))
+		return dev_err_probe(dev, PTR_ERR(phy->clk_bus),
+				     "Could not get bus clock\n");
 
-	if (phy->variant->has_phy_clk) {
-		phy->clk_pll0 = of_clk_get_by_name(node, "pll-0");
-		if (IS_ERR(phy->clk_pll0)) {
-			dev_err(dev, "Could not get pll-0 clock\n");
-			ret = PTR_ERR(phy->clk_pll0);
-			goto err_put_clk_mod;
-		}
-
-		if (phy->variant->has_second_pll) {
-			phy->clk_pll1 = of_clk_get_by_name(node, "pll-1");
-			if (IS_ERR(phy->clk_pll1)) {
-				dev_err(dev, "Could not get pll-1 clock\n");
-				ret = PTR_ERR(phy->clk_pll1);
-				goto err_put_clk_pll0;
-			}
-		}
-	}
+	phy->clk_mod = devm_clk_get(dev, "mod");
+	if (IS_ERR(phy->clk_mod))
+		return dev_err_probe(dev, PTR_ERR(phy->clk_mod),
+				     "Could not get mod clock\n");
 
-	phy->rst_phy = of_reset_control_get_shared(node, "phy");
-	if (IS_ERR(phy->rst_phy)) {
-		dev_err(dev, "Could not get phy reset control\n");
-		ret = PTR_ERR(phy->rst_phy);
-		goto err_put_clk_pll1;
-	}
+	if (phy->variant->has_phy_clk)
+		phy->clk_pll0 = devm_clk_get(dev, "pll-0");
+	if (IS_ERR(phy->clk_pll0))
+		return dev_err_probe(dev, PTR_ERR(phy->clk_pll0),
+				     "Could not get pll-0 clock\n");
+
+	if (phy->variant->has_second_pll)
+		phy->clk_pll1 = devm_clk_get(dev, "pll-1");
+	if (IS_ERR(phy->clk_pll1))
+		return dev_err_probe(dev, PTR_ERR(phy->clk_pll1),
+				     "Could not get pll-1 clock\n");
+
+	phy->rst_phy = devm_reset_control_get_shared(dev, "phy");
+	if (IS_ERR(phy->rst_phy))
+		return dev_err_probe(dev, PTR_ERR(phy->rst_phy),
+				     "Could not get phy reset control\n");
 
 	platform_set_drvdata(pdev, phy);
 
 	return 0;
-
-err_put_clk_pll1:
-	clk_put(phy->clk_pll1);
-err_put_clk_pll0:
-	clk_put(phy->clk_pll0);
-err_put_clk_mod:
-	clk_put(phy->clk_mod);
-err_put_clk_bus:
-	clk_put(phy->clk_bus);
-
-	return ret;
-}
-
-static int sun8i_hdmi_phy_remove(struct platform_device *pdev)
-{
-	struct sun8i_hdmi_phy *phy = platform_get_drvdata(pdev);
-
-	reset_control_put(phy->rst_phy);
-
-	clk_put(phy->clk_pll0);
-	clk_put(phy->clk_pll1);
-	clk_put(phy->clk_mod);
-	clk_put(phy->clk_bus);
-	return 0;
 }
 
 struct platform_driver sun8i_hdmi_phy_driver = {
 	.probe  = sun8i_hdmi_phy_probe,
-	.remove = sun8i_hdmi_phy_remove,
 	.driver = {
 		.name = "sun8i-hdmi-phy",
 		.of_match_table = sun8i_hdmi_phy_of_table,
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-04-12  4:39 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-12  4:35 [PATCH 0/6] drm/sun4i: HDMI PHY cleanup/refactoring Samuel Holland
2022-04-12  4:35 ` [PATCH 1/6] drm/sun4i: sun8i-hdmi-phy: Use of_device_get_match_data Samuel Holland
2022-04-12  4:35 ` [PATCH 2/6] drm/sun4i: sun8i-hdmi-phy: Use devm_platform_ioremap_resource Samuel Holland
2022-04-12  4:35 ` Samuel Holland [this message]
2022-04-12 13:23   ` [PATCH 3/6] drm/sun4i: sun8i-hdmi-phy: Used device-managed clocks/resets Maxime Ripard
2022-04-12 23:34     ` Samuel Holland
2022-05-31 15:16       ` Maxime Ripard
2022-04-12  4:35 ` [PATCH 4/6] drm/sun4i: sun8i-hdmi-phy: Support multiple custom PHY ops Samuel Holland
2022-04-12  4:35 ` [PATCH 5/6] drm/sun4i: sun8i-hdmi-phy: Separate A83T and H3 " Samuel Holland
2022-04-12  4:35 ` [PATCH 6/6] drm/sun4i: sun8i-hdmi-phy: Group PHY ops functions by generation Samuel Holland

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220412043512.49364-4-samuel@sholland.org \
    --to=samuel@sholland.org \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=mripard@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox