From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: "Marek Behún" <kabel@kernel.org>
Cc: "Bjorn Helgaas" <helgaas@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Marc Zyngier" <maz@kernel.org>,
pali@kernel.org, linux-pci@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
"Gregory CLEMENT" <gregory.clement@bootlin.com>
Subject: Re: [PATCH 17/18] PCI: aardvark: Run link training in separate worker
Date: Tue, 12 Apr 2022 16:25:24 +0100 [thread overview]
Message-ID: <20220412152524.GB20749@lpieralisi> (raw)
In-Reply-To: <20220220193346.23789-18-kabel@kernel.org>
On Sun, Feb 20, 2022 at 08:33:45PM +0100, Marek Behún wrote:
> From: Pali Rohár <pali@kernel.org>
>
> Link training and PCIe card reset routines in Aardvark contain several
> delays, resulting in rather slow PCIe card probing. The worst case is
> when there is no card connected: the driver tries link training at all
> possible speeds and waits until all timers expire.
>
> Since probe methods for all system devices are called sequentially, this
> results in noticeably longer boot time.
>
> Move card reset and link training code from driver probe function into
> a separate worker, so that kernel can do something different while the
> driver is waiting during reset or training.
>
> On ESPRESSObin and Turris MOX this decreases boot time by 0.4s with
> plugged PCIe card and by 2.2s if no card is connected.
I believe this is what the PROBE_PREFER_ASYNCHRONOUS flag in
struct device_driver.probe_type flag is there for unless I am
missing something obvious here.
Can you give it a try and report back please ?
Thanks,
Lorenzo
> Signed-off-by: Pali Rohár <pali@kernel.org>
> Signed-off-by: Marek Behún <kabel@kernel.org>
> ---
> drivers/pci/controller/pci-aardvark.c | 42 ++++++++++++++++++---------
> 1 file changed, 28 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
> index 8c9ac7766ac7..056f49d0e3a4 100644
> --- a/drivers/pci/controller/pci-aardvark.c
> +++ b/drivers/pci/controller/pci-aardvark.c
> @@ -26,6 +26,7 @@
> #include <linux/of_gpio.h>
> #include <linux/of_pci.h>
> #include <linux/timer.h>
> +#include <linux/workqueue.h>
>
> #include "../pci.h"
> #include "../pci-bridge-emul.h"
> @@ -296,6 +297,8 @@ struct advk_pcie {
> int link_gen;
> bool link_was_up;
> struct timer_list link_irq_timer;
> + struct delayed_work probe_card_work;
> + bool host_bridge_probed;
> struct pci_bridge_emul bridge;
> struct gpio_desc *reset_gpio;
> struct clk *clk;
> @@ -497,6 +500,21 @@ static void advk_pcie_train_link(struct advk_pcie *pcie)
> dev_err(dev, "link never came up\n");
> }
>
> +static void advk_pcie_probe_card_work(struct work_struct *work)
> +{
> + struct delayed_work *dwork = container_of(work, struct delayed_work,
> + work);
> + struct advk_pcie *pcie = container_of(dwork, struct advk_pcie,
> + probe_card_work);
> + struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
> + int ret;
> +
> + advk_pcie_train_link(pcie);
> + ret = pci_host_probe(bridge);
> + if (!ret)
> + pcie->host_bridge_probed = true;
> +}
> +
> /*
> * Set PCIe address window register which could be used for memory
> * mapping.
> @@ -701,8 +719,6 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
> /* Disable remaining PCIe outbound windows */
> for (i = pcie->wins_count; i < OB_WIN_COUNT; i++)
> advk_pcie_disable_ob_win(pcie, i);
> -
> - advk_pcie_train_link(pcie);
> }
>
> static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u32 *val)
> @@ -2112,14 +2128,8 @@ static int advk_pcie_probe(struct platform_device *pdev)
> bridge->ops = &advk_pcie_ops;
> bridge->map_irq = advk_pcie_map_irq;
>
> - ret = pci_host_probe(bridge);
> - if (ret < 0) {
> - irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
> - advk_pcie_remove_rp_irq_domain(pcie);
> - advk_pcie_remove_msi_irq_domain(pcie);
> - advk_pcie_remove_irq_domain(pcie);
> - return ret;
> - }
> + INIT_DELAYED_WORK(&pcie->probe_card_work, advk_pcie_probe_card_work);
> + schedule_delayed_work(&pcie->probe_card_work, 1);
>
> return 0;
> }
> @@ -2131,11 +2141,15 @@ static int advk_pcie_remove(struct platform_device *pdev)
> u32 val;
> int i;
>
> + cancel_delayed_work_sync(&pcie->probe_card_work);
> +
> /* Remove PCI bus with all devices */
> - pci_lock_rescan_remove();
> - pci_stop_root_bus(bridge->bus);
> - pci_remove_root_bus(bridge->bus);
> - pci_unlock_rescan_remove();
> + if (pcie->host_bridge_probed) {
> + pci_lock_rescan_remove();
> + pci_stop_root_bus(bridge->bus);
> + pci_remove_root_bus(bridge->bus);
> + pci_unlock_rescan_remove();
> + }
>
> /* Disable Root Bridge I/O space, memory space and bus mastering */
> val = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
> --
> 2.34.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-04-12 15:26 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-20 19:33 [PATCH 00/18] PCI: aardvark controller changes BATCH 5 Marek Behún
2022-02-20 19:33 ` [PATCH 01/18] PCI: pci-bridge-emul: Re-arrange register tests Marek Behún
2022-02-20 19:33 ` [PATCH 02/18] PCI: pci-bridge-emul: Add support for PCIe extended capabilities Marek Behún
2022-02-20 19:33 ` [PATCH 03/18] PCI: aardvark: Add support for AER registers on emulated bridge Marek Behún
2022-02-20 19:33 ` [PATCH 04/18] PCI: Add PCI_EXP_SLTCAP_*_SHIFT macros Marek Behún
2022-04-28 11:09 ` Lorenzo Pieralisi
2022-04-28 11:16 ` Pali Rohár
2022-05-18 19:23 ` Bjorn Helgaas
2022-05-18 19:26 ` Pali Rohár
2022-05-18 20:05 ` Marek Behún
2022-05-18 20:27 ` Bjorn Helgaas
2022-02-20 19:33 ` [PATCH 05/18] PCI: aardvark: Fix reporting Slot capabilities on emulated bridge Marek Behún
2022-02-20 19:33 ` [PATCH 06/18] PCI: pciehp: Enable DLLSC interrupt only if supported Marek Behún
[not found] ` <20220509034216.GA26780@wunner.de>
2022-05-13 16:57 ` Pali Rohár
[not found] ` <20220514091400.GA20725@wunner.de>
2022-08-18 12:22 ` Marek Behún
2022-02-20 19:33 ` [PATCH 07/18] PCI: pciehp: Enable Command Completed Interrupt " Marek Behún
[not found] ` <20220509040139.GB26780@wunner.de>
2022-05-13 16:59 ` Pali Rohár
2022-02-20 19:33 ` [PATCH 08/18] PCI: aardvark: Add support for DLLSC and hotplug interrupt Marek Behún
2022-02-20 19:33 ` [PATCH 09/18] PCI: Add PCI_EXP_SLTCTL_ASPL_DISABLE macro Marek Behún
2022-02-20 19:33 ` [PATCH 10/18] PCI: Add function for parsing `slot-power-limit-milliwatt` DT property Marek Behún
2022-02-20 19:33 ` [PATCH 11/18] dt-bindings: PCI: aardvark: Describe slot-power-limit-milliwatt Marek Behún
2022-02-20 19:33 ` [PATCH 12/18] PCI: aardvark: Send Set_Slot_Power_Limit message Marek Behún
2022-02-20 19:33 ` [PATCH 13/18] arm64: dts: armada-3720-turris-mox: Define slot-power-limit-milliwatt for PCIe Marek Behún
2022-02-20 19:33 ` [PATCH 14/18] PCI: aardvark: Add clock support Marek Behún
2022-02-20 19:33 ` [PATCH 15/18] arm64: dts: marvell: armada-37xx: Add clock to PCIe node Marek Behún
2022-02-28 15:52 ` Gregory CLEMENT
2022-02-20 19:33 ` [PATCH 16/18] PCI: aardvark: Add suspend to RAM support Marek Behún
2022-04-12 11:14 ` Lorenzo Pieralisi
2022-02-20 19:33 ` [PATCH 17/18] PCI: aardvark: Run link training in separate worker Marek Behún
2022-04-12 15:25 ` Lorenzo Pieralisi [this message]
2022-04-12 17:55 ` Pali Rohár
2022-04-13 9:16 ` Lorenzo Pieralisi
2022-05-04 14:02 ` Marek Behún
2022-02-20 19:33 ` [PATCH 18/18] PCI: aardvark: Optimize PCIe card reset via GPIO Marek Behún
2022-04-11 15:36 ` [PATCH 00/18] PCI: aardvark controller changes BATCH 5 Lorenzo Pieralisi
2022-04-11 16:53 ` Pali Rohár
2022-05-13 10:33 ` Lorenzo Pieralisi
2022-05-13 16:48 ` Pali Rohár
2022-05-18 15:54 ` (subset) " Lorenzo Pieralisi
2022-08-16 16:25 ` Lorenzo Pieralisi
2022-08-18 13:56 ` Marek Behún
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220412152524.GB20749@lpieralisi \
--to=lorenzo.pieralisi@arm.com \
--cc=gregory.clement@bootlin.com \
--cc=helgaas@kernel.org \
--cc=kabel@kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=maz@kernel.org \
--cc=pali@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox