linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Charles Mirabile <cmirabil@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Charles Mirabile <cmirabil@redhat.com>,
	Serge Schneider <serge@raspberrypi.org>,
	Stefan Wahren <stefan.wahren@i2se.com>,
	Nicolas Saenz Julienne <nsaenzju@redhat.com>,
	Mattias Brugger <mbrugger@suse.com>,
	linux-rpi-kernel@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	fedora-rpi@googlegroups.com, Mwesigwa Guma <mguma@redhat.com>,
	Joel Savitz <jsavitz@redhat.com>
Subject: [PATCH v8 6/6] DO NOT MERGE: full sensehat device tree overlay for raspberry pi 4
Date: Tue, 12 Apr 2022 16:13:43 -0400	[thread overview]
Message-ID: <20220412201343.8074-7-cmirabil@redhat.com> (raw)
In-Reply-To: <20220412201343.8074-1-cmirabil@redhat.com>

This patch shold not be merged - dtbs files are not stored in the
kernel tree. We just provide this file so the code can be tested.

This overlay is suitable for testing the driver, it can be compiled with
dtc and put in the /boot/overlays/ folder then specified in config.txt
by putting the lines:

dtoverlay=		#suppress loading of default overlay for HAT
dtoverlay=sensehat	#load custom overlay

at the beginning before any other lines in config.txt

Co-developed-by: Mwesigwa Guma <mguma@redhat.com>
Signed-off-by: Mwesigwa Guma <mguma@redhat.com>
Co-developed-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
---
 sensehat.dtbs | 54 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 sensehat.dtbs

diff --git a/sensehat.dtbs b/sensehat.dtbs
new file mode 100644
index 000000000000..82d129c847fb
--- /dev/null
+++ b/sensehat.dtbs
@@ -0,0 +1,54 @@
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2835";
+};
+
+&i2c1 {
+	#address-cells = <0x01>;
+	#size-cells = <0x00>;
+	status = "okay";
+
+	sensehat@46 {
+		#address-cells = <0x01>;
+		#size-cells = <0x00>;
+		compatible = "raspberrypi,sensehat";
+		reg = <0x46>;
+		interrupt-parent = <&gpio>;
+		status = "okay";
+		display {
+			compatible = "raspberrypi,sensehat-display";
+			status = "okay";
+		};
+		joystick {
+			compatible = "raspberrypi,sensehat-joystick";
+			interrupts = <23 1>;
+			status = "okay";
+		};
+	};
+
+	lsm9ds1-magn@1c {
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1c>;
+		status = "okay";
+	};
+
+	lsm9ds1-accel@6a {
+		compatible = "st,lsm9ds1-accel";
+		reg = <0x6a>;
+		status = "okay";
+	};
+
+	lps25h-press@5c {
+		compatible = "st,lps25h-press";
+		reg = <0x5c>;
+		status = "okay";
+	};
+
+	hts221-humid@5f {
+		compatible = "st,hts221-humid\0st,hts221";
+		reg = <0x5f>;
+		status = "okay";
+	};
+};
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

      parent reply	other threads:[~2022-04-12 20:17 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-12 20:13 [PATCH v8 0/6] Raspberry Pi Sense HAT driver Charles Mirabile
2022-04-12 20:13 ` [PATCH v8 1/6] drivers/mfd: sensehat: Add Raspberry Pi Sense HAT to simple_mfd_i2c Charles Mirabile
2022-04-12 20:13 ` [PATCH v8 2/6] drivers/input/joystick: sensehat: Raspberry Pi Sense HAT joystick driver Charles Mirabile
2022-04-12 20:13 ` [PATCH v8 3/6] drivers/auxdisplay: sensehat: Raspberry Pi Sense HAT display driver Charles Mirabile
2022-04-12 20:13 ` [PATCH v8 4/6] dt-bindings: mfd: sensehat: Add Raspberry Pi Sense HAT schema Charles Mirabile
2022-04-13 13:38   ` Krzysztof Kozlowski
2022-04-13 13:40     ` Krzysztof Kozlowski
2022-04-12 20:13 ` [PATCH v8 5/6] MAINTAINERS: Add sensehat driver authors to MAINTAINERS Charles Mirabile
2022-04-12 20:13 ` Charles Mirabile [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220412201343.8074-7-cmirabil@redhat.com \
    --to=cmirabil@redhat.com \
    --cc=fedora-rpi@googlegroups.com \
    --cc=jsavitz@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=mbrugger@suse.com \
    --cc=mguma@redhat.com \
    --cc=nsaenzju@redhat.com \
    --cc=serge@raspberrypi.org \
    --cc=stefan.wahren@i2se.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).