From: Christoph Hellwig <hch@lst.de>
To: Russell King <linux@armlinux.org.uk>, Arnd Bergmann <arnd@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>,
Andre Przywara <andre.przywara@arm.com>,
Andrew Lunn <andrew@lunn.ch>,
Gregory Clement <gregory.clement@bootlin.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Alan Stern <stern@rowland.harvard.edu>,
Laurentiu Tudor <laurentiu.tudor@nxp.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Robin Murphy <robin.murphy@arm.com>,
iommu@lists.linux-foundation.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: [PATCH 3/7] ARM: mark various dma-mapping routines static in dma-mapping.c
Date: Thu, 21 Apr 2022 09:42:00 +0200 [thread overview]
Message-ID: <20220421074204.1284072-4-hch@lst.de> (raw)
In-Reply-To: <20220421074204.1284072-1-hch@lst.de>
With the dmabounce removal these aren't used outside of dma-mapping.c,
so mark them static. Move the dma_map_ops declarations down a bit
to avoid lots of forward declarations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/arm/include/asm/dma-mapping.h | 75 ----------------------
arch/arm/mm/dma-mapping.c | 100 +++++++++++++----------------
2 files changed, 46 insertions(+), 129 deletions(-)
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 1e015a7ad86aa..6427b934bd11c 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -20,80 +20,5 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
return NULL;
}
-/**
- * arm_dma_alloc - allocate consistent memory for DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: required memory size
- * @handle: bus-specific DMA address
- * @attrs: optinal attributes that specific mapping properties
- *
- * Allocate some memory for a device for performing DMA. This function
- * allocates pages, and will return the CPU-viewed address, and sets @handle
- * to be the device-viewed address.
- */
-extern void *arm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
- gfp_t gfp, unsigned long attrs);
-
-/**
- * arm_dma_free - free memory allocated by arm_dma_alloc
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: size of memory originally requested in dma_alloc_coherent
- * @cpu_addr: CPU-view address returned from dma_alloc_coherent
- * @handle: device-view address returned from dma_alloc_coherent
- * @attrs: optinal attributes that specific mapping properties
- *
- * Free (and unmap) a DMA buffer previously allocated by
- * arm_dma_alloc().
- *
- * References to memory and mappings associated with cpu_addr/handle
- * during and after this call executing are illegal.
- */
-extern void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
- dma_addr_t handle, unsigned long attrs);
-
-/**
- * arm_dma_mmap - map a coherent DMA allocation into user space
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @vma: vm_area_struct describing requested user mapping
- * @cpu_addr: kernel CPU-view address returned from dma_alloc_coherent
- * @handle: device-view address returned from dma_alloc_coherent
- * @size: size of memory originally requested in dma_alloc_coherent
- * @attrs: optinal attributes that specific mapping properties
- *
- * Map a coherent DMA buffer previously allocated by dma_alloc_coherent
- * into user space. The coherent DMA buffer must not be freed by the
- * driver until the user space mapping has been released.
- */
-extern int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
- void *cpu_addr, dma_addr_t dma_addr, size_t size,
- unsigned long attrs);
-
-/*
- * For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic"
- * and utilize bounce buffers as needed to work around limited DMA windows.
- *
- * On the SA-1111, a bug limits DMA to only certain regions of RAM.
- * On the IXP425, the PCI inbound window is 64MB (256MB total RAM)
- * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM)
- *
- * The following are helper functions used by the dmabounce subystem
- *
- */
-
-/*
- * The scatter list versions of the above methods.
- */
-extern int arm_dma_map_sg(struct device *, struct scatterlist *, int,
- enum dma_data_direction, unsigned long attrs);
-extern void arm_dma_unmap_sg(struct device *, struct scatterlist *, int,
- enum dma_data_direction, unsigned long attrs);
-extern void arm_dma_sync_sg_for_cpu(struct device *, struct scatterlist *, int,
- enum dma_data_direction);
-extern void arm_dma_sync_sg_for_device(struct device *, struct scatterlist *, int,
- enum dma_data_direction);
-extern int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt,
- void *cpu_addr, dma_addr_t dma_addr, size_t size,
- unsigned long attrs);
-
#endif /* __KERNEL__ */
#endif
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 82ffac621854f..0ee5adbdd3f1d 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -193,50 +193,6 @@ static int arm_dma_supported(struct device *dev, u64 mask)
return dma_to_pfn(dev, mask) >= max_dma_pfn;
}
-const struct dma_map_ops arm_dma_ops = {
- .alloc = arm_dma_alloc,
- .free = arm_dma_free,
- .alloc_pages = dma_direct_alloc_pages,
- .free_pages = dma_direct_free_pages,
- .mmap = arm_dma_mmap,
- .get_sgtable = arm_dma_get_sgtable,
- .map_page = arm_dma_map_page,
- .unmap_page = arm_dma_unmap_page,
- .map_sg = arm_dma_map_sg,
- .unmap_sg = arm_dma_unmap_sg,
- .map_resource = dma_direct_map_resource,
- .sync_single_for_cpu = arm_dma_sync_single_for_cpu,
- .sync_single_for_device = arm_dma_sync_single_for_device,
- .sync_sg_for_cpu = arm_dma_sync_sg_for_cpu,
- .sync_sg_for_device = arm_dma_sync_sg_for_device,
- .dma_supported = arm_dma_supported,
- .get_required_mask = dma_direct_get_required_mask,
-};
-EXPORT_SYMBOL(arm_dma_ops);
-
-static void *arm_coherent_dma_alloc(struct device *dev, size_t size,
- dma_addr_t *handle, gfp_t gfp, unsigned long attrs);
-static void arm_coherent_dma_free(struct device *dev, size_t size, void *cpu_addr,
- dma_addr_t handle, unsigned long attrs);
-static int arm_coherent_dma_mmap(struct device *dev, struct vm_area_struct *vma,
- void *cpu_addr, dma_addr_t dma_addr, size_t size,
- unsigned long attrs);
-
-const struct dma_map_ops arm_coherent_dma_ops = {
- .alloc = arm_coherent_dma_alloc,
- .free = arm_coherent_dma_free,
- .alloc_pages = dma_direct_alloc_pages,
- .free_pages = dma_direct_free_pages,
- .mmap = arm_coherent_dma_mmap,
- .get_sgtable = arm_dma_get_sgtable,
- .map_page = arm_coherent_dma_map_page,
- .map_sg = arm_dma_map_sg,
- .map_resource = dma_direct_map_resource,
- .dma_supported = arm_dma_supported,
- .get_required_mask = dma_direct_get_required_mask,
-};
-EXPORT_SYMBOL(arm_coherent_dma_ops);
-
static void __dma_clear_buffer(struct page *page, size_t size, int coherent_flag)
{
/*
@@ -742,7 +698,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
* Allocate DMA-coherent memory space and return both the kernel remapped
* virtual and bus address for that space.
*/
-void *arm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
+static void *arm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
gfp_t gfp, unsigned long attrs)
{
pgprot_t prot = __get_dma_pgprot(attrs, PAGE_KERNEL);
@@ -791,7 +747,7 @@ static int arm_coherent_dma_mmap(struct device *dev, struct vm_area_struct *vma,
return __arm_dma_mmap(dev, vma, cpu_addr, dma_addr, size, attrs);
}
-int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
+static int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
void *cpu_addr, dma_addr_t dma_addr, size_t size,
unsigned long attrs)
{
@@ -824,7 +780,7 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
kfree(buf);
}
-void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
+static void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
dma_addr_t handle, unsigned long attrs)
{
__arm_dma_free(dev, size, cpu_addr, handle, attrs, false);
@@ -836,7 +792,7 @@ static void arm_coherent_dma_free(struct device *dev, size_t size, void *cpu_add
__arm_dma_free(dev, size, cpu_addr, handle, attrs, true);
}
-int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+static int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt,
void *cpu_addr, dma_addr_t handle, size_t size,
unsigned long attrs)
{
@@ -977,7 +933,7 @@ static void __dma_page_dev_to_cpu(struct page *page, unsigned long off,
* Device ownership issues as mentioned for dma_map_single are the same
* here.
*/
-int arm_dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+static int arm_dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
enum dma_data_direction dir, unsigned long attrs)
{
const struct dma_map_ops *ops = get_dma_ops(dev);
@@ -1013,8 +969,8 @@ int arm_dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
* Unmap a set of streaming mode DMA translations. Again, CPU access
* rules concerning calls here are the same as for dma_unmap_single().
*/
-void arm_dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
- enum dma_data_direction dir, unsigned long attrs)
+static void arm_dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir, unsigned long attrs)
{
const struct dma_map_ops *ops = get_dma_ops(dev);
struct scatterlist *s;
@@ -1032,7 +988,7 @@ void arm_dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
* @nents: number of buffers to map (returned from dma_map_sg)
* @dir: DMA transfer direction (same as was passed to dma_map_sg)
*/
-void arm_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+static void arm_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
int nents, enum dma_data_direction dir)
{
const struct dma_map_ops *ops = get_dma_ops(dev);
@@ -1051,8 +1007,8 @@ void arm_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
* @nents: number of buffers to map (returned from dma_map_sg)
* @dir: DMA transfer direction (same as was passed to dma_map_sg)
*/
-void arm_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction dir)
+static void arm_dma_sync_sg_for_device(struct device *dev,
+ struct scatterlist *sg, int nents, enum dma_data_direction dir)
{
const struct dma_map_ops *ops = get_dma_ops(dev);
struct scatterlist *s;
@@ -1063,6 +1019,42 @@ void arm_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
dir);
}
+const struct dma_map_ops arm_dma_ops = {
+ .alloc = arm_dma_alloc,
+ .free = arm_dma_free,
+ .alloc_pages = dma_direct_alloc_pages,
+ .free_pages = dma_direct_free_pages,
+ .mmap = arm_dma_mmap,
+ .get_sgtable = arm_dma_get_sgtable,
+ .map_page = arm_dma_map_page,
+ .unmap_page = arm_dma_unmap_page,
+ .map_sg = arm_dma_map_sg,
+ .unmap_sg = arm_dma_unmap_sg,
+ .map_resource = dma_direct_map_resource,
+ .sync_single_for_cpu = arm_dma_sync_single_for_cpu,
+ .sync_single_for_device = arm_dma_sync_single_for_device,
+ .sync_sg_for_cpu = arm_dma_sync_sg_for_cpu,
+ .sync_sg_for_device = arm_dma_sync_sg_for_device,
+ .dma_supported = arm_dma_supported,
+ .get_required_mask = dma_direct_get_required_mask,
+};
+EXPORT_SYMBOL(arm_dma_ops);
+
+const struct dma_map_ops arm_coherent_dma_ops = {
+ .alloc = arm_coherent_dma_alloc,
+ .free = arm_coherent_dma_free,
+ .alloc_pages = dma_direct_alloc_pages,
+ .free_pages = dma_direct_free_pages,
+ .mmap = arm_coherent_dma_mmap,
+ .get_sgtable = arm_dma_get_sgtable,
+ .map_page = arm_coherent_dma_map_page,
+ .map_sg = arm_dma_map_sg,
+ .map_resource = dma_direct_map_resource,
+ .dma_supported = arm_dma_supported,
+ .get_required_mask = dma_direct_get_required_mask,
+};
+EXPORT_SYMBOL(arm_coherent_dma_ops);
+
static const struct dma_map_ops *arm_get_dma_map_ops(bool coherent)
{
/*
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-04-21 7:46 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-21 7:41 fully convert arm to use dma-direct Christoph Hellwig
2022-04-21 7:41 ` [PATCH 1/7] ARM: sa1100/assabet: move dmabounce hack to ohci driver Christoph Hellwig
2022-04-21 7:41 ` [PATCH 2/7] ARM: remove dmabounce Christoph Hellwig
2022-04-21 7:48 ` Arnd Bergmann
2022-04-21 7:42 ` Christoph Hellwig [this message]
2022-04-21 7:49 ` [PATCH 3/7] ARM: mark various dma-mapping routines static in dma-mapping.c Arnd Bergmann
2022-04-21 7:42 ` [PATCH 4/7] ARM: remove the unused virt_to_dma helper Christoph Hellwig
2022-04-21 8:00 ` Arnd Bergmann
2022-04-21 14:11 ` Christoph Hellwig
2022-04-21 7:42 ` [PATCH 5/7] ARM: use dma_to_phys/phys_to_dma in the dma-mapping code Christoph Hellwig
2022-04-21 8:02 ` Arnd Bergmann
2022-04-21 7:42 ` [PATCH 6/7] ARM: use the common dma_to_phys/phys_to_dma implementation where possible Christoph Hellwig
2022-04-21 8:05 ` Arnd Bergmann
2022-04-21 14:12 ` Christoph Hellwig
2022-04-21 7:42 ` [PATCH 7/7] ARM: use dma-direct unconditionally Christoph Hellwig
2022-04-21 8:09 ` Arnd Bergmann
2022-04-21 8:14 ` fully convert arm to use dma-direct Arnd Bergmann
2022-04-21 10:41 ` Andre Przywara
2022-04-22 21:17 ` Linus Walleij
2022-04-23 10:27 ` Marc Zyngier
2022-04-23 16:43 ` Christoph Hellwig
2022-05-06 12:06 ` Marc Zyngier
2022-05-09 6:16 ` Christoph Hellwig
2022-05-09 15:44 ` Russell King (Oracle)
2022-05-09 21:51 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220421074204.1284072-4-hch@lst.de \
--to=hch@lst.de \
--cc=andre.przywara@arm.com \
--cc=andrew@lunn.ch \
--cc=arnd@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=gregory.clement@bootlin.com \
--cc=iommu@lists.linux-foundation.org \
--cc=laurentiu.tudor@nxp.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=m.szyprowski@samsung.com \
--cc=robin.murphy@arm.com \
--cc=sebastian.hesselbarth@gmail.com \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).