Re: [PATCH v4 00/13] ARM: dts: lan966x: dtsi improvements and KSwitch D10 support

From: Horatiu Vultur <horatiu.vultur@microchip.com>
To: Michael Walle <michael@walle.cc>
Cc: devicetree@vger.kernel.org,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Arnd Bergmann <arnd@arndb.de>,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
	Tudor.Ambarus@microchip.com, linux-kernel@vger.kernel.org,
	soc@kernel.org, Rob Herring <robh+dt@kernel.org>,
	Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>,
	Olof Johansson <olof@lixom.net>,
	Claudiu Beznea <claudiu.beznea@microchip.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 00/13] ARM: dts: lan966x: dtsi improvements and KSwitch D10 support
Date: Wed, 4 May 2022 12:16:54 +0200	[thread overview]
Message-ID: <20220504101654.cuui4kaxrjiw67ky@soft-dev3-1.localhost> (raw)
In-Reply-To: <20220502224127.2604333-1-michael@walle.cc>

The 05/03/2022 00:41, Michael Walle wrote:
> 
> Add missing nodes for the flexcom blocks and a node for the SGPIO
> block. Then add basic support for the Kontron KSwitch D10.
> 
> The first submission of this patchset was a long time ago. Since
> then networking matured and is now working. Thus this now also
> contains patches for all the networking related nodes and enables
> them on the Kontron D10 switch.

I have tested these changes on the lan966x-pcb82891 board which seems to
work fine.
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>

> 
> changes since v3:
>  - basic d10 switch support dropped the i2c mux and added a
>    dedicated bus for the second SFP cage.
>  - new patch to add the hwmon node
>  - new patches to add the network related nodes and to enable
>    the nodes on the d10 switch
> 
> changes since v2:
>  - add second kontron board variant and moved common stuff into a
>    new dtsi
>  - moved the uart/i2c nodes inside of the flexcom node
>  - moved sgpio child nodes inside of the sgpio node
> 
> changes since v1:
>  - fixed indendation
>  - keep compatible, reg first, move #address-cells and #size-cells
>    towards the end
> 
> Michael Walle (13):
>   ARM: dts: lan966x: swap dma channels for crypto node
>   ARM: dts: lan966x: add sgpio node
>   ARM: dts: lan966x: add missing uart DMA channel
>   ARM: dts: lan966x: add all flexcom usart nodes
>   ARM: dts: lan966x: add flexcom SPI nodes
>   ARM: dts: lan966x: add flexcom I2C nodes
>   ARM: dts: lan966x: add basic Kontron KSwitch D10 support
>   ARM: dts: lan966x: add hwmon node
>   ARM: dts: lan966x: add MIIM nodes
>   ARM: dts: lan966x: add reset switch reset node
>   ARM: dts: lan966x: add serdes node
>   ARM: dts: lan966x: add switch node
>   ARM: dts: kswitch-d10: enable networking
> 
>  arch/arm/boot/dts/Makefile                    |   4 +-
>  ...lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts |  94 +++++
>  .../lan966x-kontron-kswitch-d10-mmt-8g.dts    |  39 ++
>  .../dts/lan966x-kontron-kswitch-d10-mmt.dtsi  | 190 ++++++++++
>  arch/arm/boot/dts/lan966x.dtsi                | 353 +++++++++++++++++-
>  5 files changed, 676 insertions(+), 4 deletions(-)
>  create mode 100644 arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
>  create mode 100644 arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
>  create mode 100644 arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
> 
> --
> 2.30.2
> 

-- 
/Horatiu

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel