From: Vincent Whitchurch <vincent.whitchurch@axis.com>
To: <krzysztof.kozlowski@linaro.org>, <tglx@linutronix.de>,
<daniel.lezcano@linaro.org>
Cc: <kernel@axis.com>,
Vincent Whitchurch <vincent.whitchurch@axis.com>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-samsung-soc@vger.kernel.org>, <alim.akhtar@samsung.com>,
<devicetree@vger.kernel.org>, <robh+dt@kernel.org>
Subject: [PATCH v4 1/4] dt-bindings: timer: exynos4210-mct: Add ARTPEC-8 MCT support
Date: Thu, 9 Jun 2022 13:27:35 +0200 [thread overview]
Message-ID: <20220609112738.359385-2-vincent.whitchurch@axis.com> (raw)
In-Reply-To: <20220609112738.359385-1-vincent.whitchurch@axis.com>
The ARTPEC-8 has an MCT with 4 global and 8 local timer interrupts.
The SoC has a quad-core Cortex-A53 and a single-core Cortex-A5 which
share one MCT with one global and eight local timers. The Cortex-A53
and Cortex-A5 do not have cache-coherency between them, and therefore
run two separate kernels.
The Cortex-A53 boots first and starts the global free-running counter
and also registers a clock events device using the global timer. (This
global timer clock events is usually replaced by arch timer clock events
for each of the cores.)
When the A5 boots (via the A53), it should not use the global timer
interrupts or write to the global timer registers. This is because even
if there are four global comparators, the control bits for all four are
in the same registers, and we would need to synchronize between the
cpus. Instead, the global timer FRC (already started by the A53) should
be used as the clock source, and one of the local timers which are not
used by the A53 can be used for clock events on the A5.
To support this hardware, add a compatible for the MCT as well as two
new properties to describe the hardware-mandated sharing of the FRC and
dedicating local timers to specific processors.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
---
Notes:
v4:
- Add Krzysztof's Reviewed-by.
v3:
- Add all required bindings for ARTPEC-8 in one patch
- Rename and split local-timer-only to samsung,local-timers and
samsung,frc-shared
- Restrict above properties to the ARTPEC-8 compatible.
- Rewrite descriptions of properties to hopefully describe hardware.
v2:
- Use devicetree property instead of module parameter.
.../timer/samsung,exynos4210-mct.yaml | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
index 9c81d00b12e0..829bd2227f7c 100644
--- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
+++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
@@ -25,6 +25,7 @@ properties:
- samsung,exynos4412-mct
- items:
- enum:
+ - axis,artpec8-mct
- samsung,exynos3250-mct
- samsung,exynos5250-mct
- samsung,exynos5260-mct
@@ -45,6 +46,19 @@ properties:
reg:
maxItems: 1
+ samsung,frc-shared:
+ type: boolean
+ description: |
+ Indicates that the hardware requires that this processor share the
+ free-running counter with a different (main) processor.
+
+ samsung,local-timers:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 16
+ description: |
+ List of indices of local timers usable from this processor.
+
interrupts:
description: |
Interrupts should be put in specific order. This is, the local timer
@@ -74,6 +88,17 @@ required:
- reg
allOf:
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - axis,artpec8-mct
+ then:
+ properties:
+ samsung,local-timers: false
+ samsung,frc-shared: false
- if:
properties:
compatible:
@@ -101,6 +126,7 @@ allOf:
compatible:
contains:
enum:
+ - axis,artpec8-mct
- samsung,exynos5260-mct
- samsung,exynos5420-mct
- samsung,exynos5433-mct
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-06-09 11:32 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-09 11:27 [PATCH v4 0/4] clocksource: Add MCT support for ARTPEC-8 Vincent Whitchurch
2022-06-09 11:27 ` Vincent Whitchurch [this message]
2022-06-09 11:27 ` [PATCH v4 2/4] clocksource/drivers/exynos_mct: Support frc-shared property Vincent Whitchurch
2022-06-09 11:27 ` [PATCH v4 3/4] clocksource/drivers/exynos_mct: Support local-timers property Vincent Whitchurch
2022-06-21 13:11 ` Krzysztof Kozlowski
2022-09-07 8:59 ` Vincent Whitchurch
2022-09-07 9:07 ` Daniel Lezcano
2022-06-09 11:27 ` [PATCH v4 4/4] clocksource/drivers/exynos_mct: Enable building on ARTPEC Vincent Whitchurch
2022-09-07 9:08 ` [PATCH v4 0/4] clocksource: Add MCT support for ARTPEC-8 Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220609112738.359385-2-vincent.whitchurch@axis.com \
--to=vincent.whitchurch@axis.com \
--cc=alim.akhtar@samsung.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@axis.com \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox