From: Alim Akhtar <alim.akhtar@samsung.com>
To: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org,
linux-phy@lists.infradead.org
Cc: devicetree@vger.kernel.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, vkoul@kernel.org,
avri.altman@wdc.com, bvanassche@acm.org,
martin.petersen@oracle.com, chanho61.park@samsung.com,
pankaj.dubey@samsung.com, Alim Akhtar <alim.akhtar@samsung.com>,
Bharat Uppal <bharat.uppal@samsung.com>
Subject: [PATCH v3 3/6] phy: samsung-ufs: add support for FSD ufs phy driver
Date: Fri, 10 Jun 2022 12:59:21 +0530 [thread overview]
Message-ID: <20220610072924.12362-4-alim.akhtar@samsung.com> (raw)
In-Reply-To: <20220610072924.12362-1-alim.akhtar@samsung.com>
Adds support for Tesla Full Self-Driving (FSD) ufs phy driver.
This SoC has different cdr lock status offset.
Signed-off-by: Bharat Uppal <bharat.uppal@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
---
drivers/phy/samsung/Makefile | 1 +
drivers/phy/samsung/phy-fsd-ufs.c | 58 +++++++++++++++++++++++++++
drivers/phy/samsung/phy-samsung-ufs.c | 3 ++
drivers/phy/samsung/phy-samsung-ufs.h | 1 +
4 files changed, 63 insertions(+)
create mode 100644 drivers/phy/samsung/phy-fsd-ufs.c
diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile
index 65e4cc59403f..afb34a153e34 100644
--- a/drivers/phy/samsung/Makefile
+++ b/drivers/phy/samsung/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_PHY_SAMSUNG_UFS) += phy-exynos-ufs.o
phy-exynos-ufs-y += phy-samsung-ufs.o
phy-exynos-ufs-y += phy-exynos7-ufs.o
phy-exynos-ufs-y += phy-exynosautov9-ufs.o
+phy-exynos-ufs-y += phy-fsd-ufs.o
obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
phy-exynos-usb2-y += phy-samsung-usb2.o
phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
diff --git a/drivers/phy/samsung/phy-fsd-ufs.c b/drivers/phy/samsung/phy-fsd-ufs.c
new file mode 100644
index 000000000000..c78b6c16027d
--- /dev/null
+++ b/drivers/phy/samsung/phy-fsd-ufs.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UFS PHY driver data for FSD SoC
+ *
+ * Copyright (C) 2022 Samsung Electronics Co., Ltd.
+ *
+ */
+#include "phy-samsung-ufs.h"
+
+#define FSD_EMBEDDED_COMBO_PHY_CTRL 0x724
+#define FSD_EMBEDDED_COMBO_PHY_CTRL_MASK 0x1
+#define FSD_EMBEDDED_COMBO_PHY_CTRL_EN BIT(0)
+#define FSD_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS 0x6e
+
+static const struct samsung_ufs_phy_cfg fsd_pre_init_cfg[] = {
+ PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x017, 0x94, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x035, 0x58, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x037, 0x40, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x03b, 0x83, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x04c, 0x5b, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x05c, 0x14, PWR_MODE_ANY),
+ END_UFS_PHY_CFG
+};
+
+/* Calibration for HS mode series A/B */
+static const struct samsung_ufs_phy_cfg fsd_pre_pwr_hs_cfg[] = {
+ END_UFS_PHY_CFG
+};
+
+/* Calibration for HS mode series A/B atfer PMC */
+static const struct samsung_ufs_phy_cfg fsd_post_pwr_hs_cfg[] = {
+ END_UFS_PHY_CFG
+};
+
+static const struct samsung_ufs_phy_cfg *fsd_ufs_phy_cfgs[CFG_TAG_MAX] = {
+ [CFG_PRE_INIT] = fsd_pre_init_cfg,
+ [CFG_PRE_PWR_HS] = fsd_pre_pwr_hs_cfg,
+ [CFG_POST_PWR_HS] = fsd_post_pwr_hs_cfg,
+};
+
+const struct samsung_ufs_phy_drvdata fsd_ufs_phy = {
+ .cfgs = fsd_ufs_phy_cfgs,
+ .isol = {
+ .offset = FSD_EMBEDDED_COMBO_PHY_CTRL,
+ .mask = FSD_EMBEDDED_COMBO_PHY_CTRL_MASK,
+ .en = FSD_EMBEDDED_COMBO_PHY_CTRL_EN,
+ },
+ .has_symbol_clk = 0,
+ .cdr_lock_status_offset = FSD_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS,
+};
diff --git a/drivers/phy/samsung/phy-samsung-ufs.c b/drivers/phy/samsung/phy-samsung-ufs.c
index 7218acd2b113..565945d6b5b3 100644
--- a/drivers/phy/samsung/phy-samsung-ufs.c
+++ b/drivers/phy/samsung/phy-samsung-ufs.c
@@ -357,6 +357,9 @@ static const struct of_device_id samsung_ufs_phy_match[] = {
}, {
.compatible = "samsung,exynosautov9-ufs-phy",
.data = &exynosautov9_ufs_phy,
+ }, {
+ .compatible = "tesla,fsd-ufs-phy",
+ .data = &fsd_ufs_phy,
},
{},
};
diff --git a/drivers/phy/samsung/phy-samsung-ufs.h b/drivers/phy/samsung/phy-samsung-ufs.h
index 913542ebff7a..6320ac852f29 100644
--- a/drivers/phy/samsung/phy-samsung-ufs.h
+++ b/drivers/phy/samsung/phy-samsung-ufs.h
@@ -145,5 +145,6 @@ static inline void samsung_ufs_phy_ctrl_isol(
extern const struct samsung_ufs_phy_drvdata exynos7_ufs_phy;
extern const struct samsung_ufs_phy_drvdata exynosautov9_ufs_phy;
+extern const struct samsung_ufs_phy_drvdata fsd_ufs_phy;
#endif /* _PHY_SAMSUNG_UFS_ */
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-06-10 7:34 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20220610073155epcas5p397e45ae128b29d3f99942fddf9afc0a3@epcas5p3.samsung.com>
2022-06-10 7:29 ` [PATCH v3 0/6] Add support for UFS controller found in FSD SoC Alim Akhtar
2022-06-10 7:29 ` [PATCH v3 1/6] dt-bindings: phy: Add FSD UFS PHY bindings Alim Akhtar
2022-06-10 7:29 ` [PATCH v3 2/6] phy: samsung-ufs: move cdr offset to drvdata Alim Akhtar
2022-06-10 7:29 ` Alim Akhtar [this message]
2022-06-10 7:29 ` [PATCH v3 4/6] dt-bindings: ufs: exynos-ufs: add fsd compatible Alim Akhtar
2022-06-10 7:29 ` [PATCH v3 5/6] ufs: host: ufs-exynos: add mphy apb clock mask Alim Akhtar
2022-06-10 7:29 ` [PATCH v3 6/6] ufs: host: ufs-exynos: add support for fsd ufs hci Alim Akhtar
2022-06-10 8:36 ` Chanho Park
2022-06-10 10:46 ` Alim Akhtar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220610072924.12362-4-alim.akhtar@samsung.com \
--to=alim.akhtar@samsung.com \
--cc=avri.altman@wdc.com \
--cc=bharat.uppal@samsung.com \
--cc=bvanassche@acm.org \
--cc=chanho61.park@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=pankaj.dubey@samsung.com \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).