From: Shawn Guo <shawnguo@kernel.org>
To: Marcel Ziswiler <marcel@ziswiler.com>
Cc: linux-arm-kernel@lists.infradead.org,
Marcel Ziswiler <marcel.ziswiler@toradex.com>,
Alexander Stein <alexander.stein@ew.tq-group.com>,
Arnd Bergmann <arnd@arndb.de>,
Denys Drozdov <denys.drozdov@toradex.com>,
Fabio Estevam <festevam@denx.de>,
Fabio Estevam <festevam@gmail.com>,
Frank Rowand <frowand.list@gmail.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Li Yang <leoyang.li@nxp.com>,
Lucas Stach <l.stach@pengutronix.de>, Marek Vasut <marex@denx.de>,
Matthias Schiffer <matthias.schiffer@tq-group.com>,
Max Krummenacher <max.krummenacher@toradex.com>,
NXP Linux Team <linux-imx@nxp.com>,
Olof Johansson <olof@lixom.net>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Russell King <linux@armlinux.org.uk>,
Sascha Hauer <s.hauer@pengutronix.de>,
Stefan Agner <stefan@agner.ch>,
Tim Harvey <tharvey@gateworks.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
soc@kernel.org
Subject: Re: [PATCH v2 00/24] ARM: dts: imx7-colibri: device tree improvements
Date: Sat, 11 Jun 2022 17:16:13 +0800 [thread overview]
Message-ID: <20220611091613.GH254723@dragon> (raw)
In-Reply-To: <20220516134734.493065-1-marcel@ziswiler.com>
On Mon, May 16, 2022 at 03:47:10PM +0200, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
>
> This is a general update of the Colibri iMX7 device tree files.
>
> The Toradex Colibri family is composed of a SoM that can be plugged on
> various carrier boards, with carrier boards allowing multiple optional
> accessories (e.g. display, camera, ...).
>
> The device tree sources are structured into a SoM dtsi and a carrier dts
> which then includes the SoM dtsi. The SoM dtsi defines and enables the
> functionality self-contained on the SoM and prepares for the
> functionality provided by the carrier HW or accessories so that the
> carrier dts then can enable or amend nodes provided. Accessories are
> enabled in overlays depending on HW configuration.
>
> Please find the following colibri-imx7 device trees improvements:
>
> - Display/Touch Functionality Overhaul
> Rename display interface to match other modules to make it easier to
> use device tree overlays.
> The parallel RGB interface (lcdif) and all related stuff turn on in a
> device tree overlay. Keep them disabled in the main devicetree.
> As these subsystems are provided by module and not a part of boards,
> move their definitions into the module-level devicetree.
> Disable ad7879 touchscreen which turns on in a devic tree overlay.
> Remains it disabled in the main devicetree.
> The Toradex 7" Capacitive and 10" LVDS touch screens are Atmel MXT
> peripherals available on the I2C bus for touchscreen events. Add
> atmel_mxt_ts node to the module-level device tree. Also, provide pinmux
> configuration for the INT/RST inputs from SODIMM pins 106/107 for most
> carrier boards or an external touchscreen adapter inputs configured to
> SODIMM pins 28/30.
>
> - Ethernet Improvements
> Add the MDIO bus with the respective PHY.
> Add Ethernet aliases which is required to properly pass MAC address
> from bootloader.
> Add delay for on-module phy supply.
>
> - USB Device/Host Switching
> Add usb dual-role switching using extcon.
>
> - MMC/SD
> The original Colibri specification only defined 3.3 volt TTL signaling
> and relied on external on-carrier pull-ups for the SD_DATA[0..3] lines.
> The latest carrier boards like Iris V2 on the other hand are now UHS-I
> compliant by leaving such external on-carrier pull-ups away relying on
> module- or even SoC-level ones which pull up to resp. signaling voltage.
> In such cases, the carrier board-level device tree may explicitly delete
> the no-1-8-v property to enable full UHS-I support.
> Also, fix SD/MMC regulator for the carrier boards using UHS-I modes.
>
> - Add Iris and Iris V2 Carrier Board Device Trees
> Add support for Toradex Iris carrier boards.
>
> Changes in v2:
> - Add Krzysztof's acked-by. Thanks!
> - Revert change on arch/arm/boot/dts/imx6dl-colibri-iris.dts which
> slipped into this patch set by error.
> - Re-based on top of Shawn's for-next.
>
> Marcel Ziswiler (18):
> ARM: dts: imx7-colibri: overhaul display/touch functionality
> ARM: dts: imx7-colibri: add mdio phy node
> ARM: dts: imx7-colibri: move aliases, chosen, extcon and gpio-keys
> ARM: dts: imx7-colibri: move regulators
> ARM: dts: imx7-colibri: clean-up usdhc1 and add sleep config
> ARM: dts: imx7-colibri: move rtc node
> ARM: dts: imx7d-colibri-emmc: add cpu1 supply
> ARM: dts: imx7-colibri-eval-v3: correct can controller comment
> ARM: dts: imx7-colibri: disable adc2
> ARM: dts: imx7-colibri-aster: add ssp aka spi cs aka ss pins
> ARM: dts: imx7-colibri: add clarifying comments
> ARM: dts: imx7-colibri: alphabetical re-order
> ARM: dts: imx7-colibri: clean-up device enabling/disabling
> ARM: dts: imx7-colibri: remove leading zero from reg address
> ARM: dts: imx7-colibri: set regulator-name properties
> ARM: dts: imx7-colibri: clean-up iomuxc pinctrl group naming
> dt-bindings: arm: fsl: add toradex,colibri-imx7s/d/d-emmc-iris/-v2
> ARM: dts: imx7-colibri: add support for Toradex Iris carrier boards
>
> Max Krummenacher (1):
> ARM: dts: imx7-colibri: add ethernet aliases
>
> Oleksandr Suvorov (3):
> ARM: dts: imx7-colibri: improve licensing and compatible strings
> ARM: dts: imx7-colibri: improve wake-up with gpio key
> ARM: dts: imx7-colibri: add delay for on-module phy supply
>
> Philippe Schenker (1):
> ARM: dts: imx7-colibri: add usb dual-role switching using extcon
>
> Stefan Agner (1):
> ARM: dts: imx7-colibri: set lcdif clock source to video pll
Applied all, thanks!
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-06-11 9:17 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-16 13:47 [PATCH v2 00/24] ARM: dts: imx7-colibri: device tree improvements Marcel Ziswiler
2022-05-16 13:47 ` [PATCH v2 01/24] ARM: dts: imx7-colibri: overhaul display/touch functionality Marcel Ziswiler
2022-05-16 13:47 ` [PATCH v2 02/24] ARM: dts: imx7-colibri: add mdio phy node Marcel Ziswiler
2022-05-16 13:47 ` [PATCH v2 03/24] ARM: dts: imx7-colibri: set lcdif clock source to video pll Marcel Ziswiler
2022-05-16 13:47 ` [PATCH v2 04/24] ARM: dts: imx7-colibri: add usb dual-role switching using extcon Marcel Ziswiler
2022-05-16 13:47 ` [PATCH v2 05/24] ARM: dts: imx7-colibri: improve licensing and compatible strings Marcel Ziswiler
2022-05-16 13:47 ` [PATCH v2 06/24] ARM: dts: imx7-colibri: improve wake-up with gpio key Marcel Ziswiler
2022-05-16 13:47 ` [PATCH v2 07/24] ARM: dts: imx7-colibri: move aliases, chosen, extcon and gpio-keys Marcel Ziswiler
2022-05-16 13:47 ` [PATCH v2 08/24] ARM: dts: imx7-colibri: add ethernet aliases Marcel Ziswiler
2022-05-16 13:47 ` [PATCH v2 09/24] ARM: dts: imx7-colibri: move regulators Marcel Ziswiler
2022-05-16 13:47 ` [PATCH v2 10/24] ARM: dts: imx7-colibri: add delay for on-module phy supply Marcel Ziswiler
2022-05-16 13:47 ` [PATCH v2 11/24] ARM: dts: imx7-colibri: clean-up usdhc1 and add sleep config Marcel Ziswiler
2022-05-16 13:47 ` [PATCH v2 12/24] ARM: dts: imx7-colibri: move rtc node Marcel Ziswiler
2022-05-16 13:47 ` [PATCH v2 13/24] ARM: dts: imx7d-colibri-emmc: add cpu1 supply Marcel Ziswiler
2022-05-16 13:47 ` [PATCH v2 14/24] ARM: dts: imx7-colibri-eval-v3: correct can controller comment Marcel Ziswiler
2022-05-16 13:47 ` [PATCH v2 15/24] ARM: dts: imx7-colibri: disable adc2 Marcel Ziswiler
2022-05-16 13:47 ` [PATCH v2 16/24] ARM: dts: imx7-colibri-aster: add ssp aka spi cs aka ss pins Marcel Ziswiler
2022-05-16 13:47 ` [PATCH v2 17/24] ARM: dts: imx7-colibri: add clarifying comments Marcel Ziswiler
2022-05-16 13:47 ` [PATCH v2 18/24] ARM: dts: imx7-colibri: alphabetical re-order Marcel Ziswiler
2022-05-16 14:09 ` [PATCH v2 19/24] ARM: dts: imx7-colibri: clean-up device enabling/disabling Marcel Ziswiler
2022-05-16 14:11 ` [PATCH v2 20/24] ARM: dts: imx7-colibri: remove leading zero from reg address Marcel Ziswiler
2022-05-16 14:11 ` [PATCH v2 21/24] ARM: dts: imx7-colibri: set regulator-name properties Marcel Ziswiler
2022-05-16 14:12 ` [PATCH v2 22/24] ARM: dts: imx7-colibri: clean-up iomuxc pinctrl group naming Marcel Ziswiler
2022-05-16 14:12 ` [PATCH v2 23/24] dt-bindings: arm: fsl: add toradex, colibri-imx7s/d/d-emmc-iris/-v2 Marcel Ziswiler
2022-05-16 14:13 ` [PATCH v2 24/24] ARM: dts: imx7-colibri: add support for Toradex Iris carrier boards Marcel Ziswiler
2022-06-11 9:16 ` Shawn Guo [this message]
2022-06-14 15:00 ` [PATCH v2 00/24] ARM: dts: imx7-colibri: device tree improvements Rob Herring
2022-06-14 15:16 ` Francesco Dolcini
2022-06-19 1:34 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220611091613.GH254723@dragon \
--to=shawnguo@kernel.org \
--cc=alexander.stein@ew.tq-group.com \
--cc=arnd@arndb.de \
--cc=denys.drozdov@toradex.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@denx.de \
--cc=festevam@gmail.com \
--cc=frowand.list@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=l.stach@pengutronix.de \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=marcel.ziswiler@toradex.com \
--cc=marcel@ziswiler.com \
--cc=marex@denx.de \
--cc=matthias.schiffer@tq-group.com \
--cc=max.krummenacher@toradex.com \
--cc=olof@lixom.net \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=soc@kernel.org \
--cc=stefan@agner.ch \
--cc=tharvey@gateworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).