Re: [PATCH v10 0/7] PCI: imx6: refine codes and add the error propagation

From: Bjorn Helgaas <helgaas@kernel.org>
To: Richard Zhu <hongxing.zhu@nxp.com>
Cc: l.stach@pengutronix.de, bhelgaas@google.com, robh+dt@kernel.org,
	broonie@kernel.org, lorenzo.pieralisi@arm.com,
	festevam@gmail.com, francesco.dolcini@toradex.com,
	linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@pengutronix.de,
	linux-imx@nxp.com
Subject: Re: [PATCH v10 0/7] PCI: imx6: refine codes and add the error propagation
Date: Mon, 13 Jun 2022 15:41:23 -0500	[thread overview]
Message-ID: <20220613204123.GA716053@bhelgaas> (raw)
In-Reply-To: <1655110538-10914-1-git-send-email-hongxing.zhu@nxp.com>

On Mon, Jun 13, 2022 at 04:55:31PM +0800, Richard Zhu wrote:
> This series patches refine pci-imx6 driver and do the following main changes.
> - Encapsulate the clock enable into one standalone function
> - Add the error propagation from host_init and resume
> - Turn off regulator when the system is in suspend mode
> - Let the probe successfully when link never comes up
> - Do not hide the phy driver callbacks in core reset and clk_enable.

This doesn't apply on v5.19-rc1 for me.  Am I missing something:

  03:38:06 ~/linux (main)$ git checkout -b wip/richard-imx6-power-v10 v5.19-rc1
  Switched to a new branch 'wip/richard-imx6-power-v10'
  03:38:14 ~/linux (wip/richard-imx6-power-v10)$ b4 am -om/ https://lore.kernel.org/r/1655110538-10914-1-git-send-email-hongxing.zhu@nxp.com
  Looking up https://lore.kernel.org/r/1655110538-10914-1-git-send-email-hongxing.zhu%40nxp.com
  Analyzing 9 messages in the thread
  Checking attestation on all messages, may take a moment...
  ---
    [PATCH v10 1/7] PCI: imx6: Encapsulate the clock enable into one standalone function
    [PATCH v10 2/7] PCI: imx6: Add the error propagation from host_init
    [PATCH v10 3/7] PCI: imx6: Move imx6_pcie_clk_disable() earlier
    [PATCH v10 4/7] PCI: imx6: Disable iMX6QDL PCIe REF clock when disable PCIe clocks
    [PATCH v10 5/7] PCI: imx6: Turn off regulator when the system is in suspend mode
    [PATCH v10 6/7] PCI: imx6: Mark the link down as none fatal error
    [PATCH v10 7/7] PCI: imx6: Do not hide phy driver callbacks and refine the error handling
  ---
  Total patches: 7
  ---
  Cover: m/v10_20220613_hongxing_zhu_pci_imx6_refine_codes_and_add_the_error_propagation.cover
   Link: https://lore.kernel.org/r/1655110538-10914-1-git-send-email-hongxing.zhu@nxp.com
   Base: not specified
	 git am m/v10_20220613_hongxing_zhu_pci_imx6_refine_codes_and_add_the_error_propagation.mbx
  03:38:27 ~/linux (wip/richard-imx6-power-v10)$ git am m/v10_20220613_hongxing_zhu_pci_imx6_refine_codes_and_add_the_error_propagation.mbx
  Applying: PCI: imx6: Encapsulate the clock enable into one standalone function
  error: patch failed: drivers/pci/controller/dwc/pci-imx6.c:539
  error: drivers/pci/controller/dwc/pci-imx6.c: patch does not apply
  Patch failed at 0001 PCI: imx6: Encapsulate the clock enable into one standalone function
  hint: Use 'git am --show-current-patch' to see the failed patch
  When you have resolved this problem, run "git am --continue".
  If you prefer to skip this patch, run "git am --skip" instead.
  To restore the original branch and stop patching, run "git am --abort".

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel