linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Richard Zhu <hongxing.zhu@nxp.com>
Cc: l.stach@pengutronix.de, bhelgaas@google.com, robh+dt@kernel.org,
	broonie@kernel.org, lorenzo.pieralisi@arm.com,
	festevam@gmail.com, francesco.dolcini@toradex.com,
	linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@pengutronix.de,
	linux-imx@nxp.com
Subject: Re: [PATCH v10 6/7] PCI: imx6: Mark the link down as none fatal error
Date: Mon, 13 Jun 2022 17:21:19 -0500	[thread overview]
Message-ID: <20220613222119.GA716475@bhelgaas> (raw)
In-Reply-To: <1655110538-10914-7-git-send-email-hongxing.zhu@nxp.com>

On Mon, Jun 13, 2022 at 04:55:37PM +0800, Richard Zhu wrote:
> let the driver probe successfully, return zero in imx6_pcie_start_link()
> when PCIe link is down.
> 
> Because i.MX PCIe doesn't support hot-plug feature.
> In this link down scenario, only start the PCIe link training in resume
> when the link is up before system suspend to avoid the long latency in
> the link training period.

This looks like two changes that should be separate patches:

  1) Make driver probe successful even if link is down.

  2) Reduce resume time by only starting the link if it was up before
     suspend.

> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 18 +++++++++++-------
>  1 file changed, 11 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index c02748393aac..ac6ec2d691a0 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -67,6 +67,7 @@ struct imx6_pcie {
>  	struct dw_pcie		*pci;
>  	int			reset_gpio;
>  	bool			gpio_active_high;
> +	bool			link_is_up;
>  	struct clk		*pcie_bus;
>  	struct clk		*pcie_phy;
>  	struct clk		*pcie_inbound_axi;
> @@ -845,7 +846,9 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
>  	/* Start LTSSM. */
>  	imx6_pcie_ltssm_enable(dev);
>  
> -	dw_pcie_wait_for_link(pci);
> +	ret = dw_pcie_wait_for_link(pci);
> +	if (ret)
> +		goto err_reset_phy;
>  
>  	if (pci->link_gen == 2) {
>  		/* Allow Gen2 mode after the link is up. */
> @@ -881,11 +884,14 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
>  		}
>  
>  		/* Make sure link training is finished as well! */
> -		dw_pcie_wait_for_link(pci);
> +		ret = dw_pcie_wait_for_link(pci);
> +		if (ret)
> +			goto err_reset_phy;
>  	} else {
>  		dev_info(dev, "Link: Gen2 disabled\n");
>  	}
>  
> +	imx6_pcie->link_is_up = true;
>  	tmp = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);
>  	dev_info(dev, "Link up, Gen%i\n", tmp & PCI_EXP_LNKSTA_CLS);
>  	return 0;
> @@ -895,7 +901,7 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
>  		dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
>  		dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
>  	imx6_pcie_reset_phy(imx6_pcie);
> -	return ret;
> +	return 0;
>  }
>  
>  static int imx6_pcie_host_init(struct pcie_port *pp)
> @@ -1022,10 +1028,8 @@ static int imx6_pcie_resume_noirq(struct device *dev)
>  	imx6_pcie_init_phy(imx6_pcie);
>  	imx6_pcie_deassert_core_reset(imx6_pcie);
>  	dw_pcie_setup_rc(pp);
> -
> -	ret = imx6_pcie_start_link(imx6_pcie->pci);
> -	if (ret < 0)
> -		dev_info(dev, "pcie link is down after resume.\n");
> +	if (imx6_pcie->link_is_up)
> +		imx6_pcie_start_link(imx6_pcie->pci);
>  
>  	return 0;
>  }
> -- 
> 2.25.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-06-13 22:22 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-13  8:55 [PATCH v10 0/7] PCI: imx6: refine codes and add the error propagation Richard Zhu
2022-06-13  8:55 ` [PATCH v10 1/7] PCI: imx6: Encapsulate the clock enable into one standalone function Richard Zhu
2022-06-13  8:55 ` [PATCH v10 2/7] PCI: imx6: Add the error propagation from host_init Richard Zhu
2022-06-13  8:55 ` [PATCH v10 3/7] PCI: imx6: Move imx6_pcie_clk_disable() earlier Richard Zhu
2022-06-13  8:55 ` [PATCH v10 4/7] PCI: imx6: Disable iMX6QDL PCIe REF clock when disable PCIe clocks Richard Zhu
2022-06-13  8:55 ` [PATCH v10 5/7] PCI: imx6: Turn off regulator when the system is in suspend mode Richard Zhu
2022-06-13 10:17   ` Francesco Dolcini
2022-06-14  0:58     ` Hongxing Zhu
2022-06-13  8:55 ` [PATCH v10 6/7] PCI: imx6: Mark the link down as none fatal error Richard Zhu
2022-06-13 22:21   ` Bjorn Helgaas [this message]
2022-06-14  1:02     ` Hongxing Zhu
2022-06-13  8:55 ` [PATCH v10 7/7] PCI: imx6: Do not hide phy driver callbacks and refine the error handling Richard Zhu
2022-06-13 20:41 ` [PATCH v10 0/7] PCI: imx6: refine codes and add the error propagation Bjorn Helgaas
2022-06-14  1:00   ` Hongxing Zhu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220613222119.GA716475@bhelgaas \
    --to=helgaas@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=broonie@kernel.org \
    --cc=festevam@gmail.com \
    --cc=francesco.dolcini@toradex.com \
    --cc=hongxing.zhu@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).