From: Ong Boon Leong <boon.leong.ong@intel.com>
To: Alexandre Torgue <alexandre.torgue@foss.st.com>,
Jose Abreu <Jose.Abreu@synopsys.com>,
Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Paolo Abeni <pabeni@redhat.com>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Vladimir Oltean <olteanv@gmail.com>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Emilio Riva <emilio.riva@ericsson.com>,
Ong Boon Leong <boon.leong.ong@intel.com>
Subject: [PATCH net-next v4 1/5] net: make xpcs_do_config to accept advertising for pcs-xpcs and sja1105
Date: Tue, 14 Jun 2022 11:00:26 +0800 [thread overview]
Message-ID: <20220614030030.1249850-2-boon.leong.ong@intel.com> (raw)
In-Reply-To: <20220614030030.1249850-1-boon.leong.ong@intel.com>
xpcs_config() has 'advertising' input that is required for C37 1000BASE-X
AN in later patch series. So, we prepare xpcs_do_config() for it.
For sja1105, xpcs_do_config() is used for xpcs configuration without
depending on advertising input, so set to NULL.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
---
drivers/net/dsa/sja1105/sja1105_main.c | 2 +-
drivers/net/pcs/pcs-xpcs.c | 6 +++---
include/linux/pcs/pcs-xpcs.h | 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 72b6fc1932b..b253e27bcfb 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -2330,7 +2330,7 @@ int sja1105_static_config_reload(struct sja1105_private *priv,
else
mode = MLO_AN_PHY;
- rc = xpcs_do_config(xpcs, priv->phy_mode[i], mode);
+ rc = xpcs_do_config(xpcs, priv->phy_mode[i], mode, NULL);
if (rc < 0)
goto out;
diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index 4cfd05c15ae..48d81c40aab 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -795,7 +795,7 @@ static int xpcs_config_2500basex(struct dw_xpcs *xpcs)
}
int xpcs_do_config(struct dw_xpcs *xpcs, phy_interface_t interface,
- unsigned int mode)
+ unsigned int mode, const unsigned long *advertising)
{
const struct xpcs_compat *compat;
int ret;
@@ -843,7 +843,7 @@ static int xpcs_config(struct phylink_pcs *pcs, unsigned int mode,
{
struct dw_xpcs *xpcs = phylink_pcs_to_xpcs(pcs);
- return xpcs_do_config(xpcs, interface, mode);
+ return xpcs_do_config(xpcs, interface, mode, advertising);
}
static int xpcs_get_state_c73(struct dw_xpcs *xpcs,
@@ -864,7 +864,7 @@ static int xpcs_get_state_c73(struct dw_xpcs *xpcs,
state->link = 0;
- return xpcs_do_config(xpcs, state->interface, MLO_AN_INBAND);
+ return xpcs_do_config(xpcs, state->interface, MLO_AN_INBAND, NULL);
}
if (state->an_enabled && xpcs_aneg_done_c73(xpcs, state, compat)) {
diff --git a/include/linux/pcs/pcs-xpcs.h b/include/linux/pcs/pcs-xpcs.h
index 266eb26fb02..37eb97cc228 100644
--- a/include/linux/pcs/pcs-xpcs.h
+++ b/include/linux/pcs/pcs-xpcs.h
@@ -30,7 +30,7 @@ int xpcs_get_an_mode(struct dw_xpcs *xpcs, phy_interface_t interface);
void xpcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
phy_interface_t interface, int speed, int duplex);
int xpcs_do_config(struct dw_xpcs *xpcs, phy_interface_t interface,
- unsigned int mode);
+ unsigned int mode, const unsigned long *advertising);
void xpcs_get_interfaces(struct dw_xpcs *xpcs, unsigned long *interfaces);
int xpcs_config_eee(struct dw_xpcs *xpcs, int mult_fact_100ns,
int enable);
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-06-14 3:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-14 3:00 [PATCH net-next v4 0/5] pcs-xpcs, stmmac: add 1000BASE-X AN for network switch Ong Boon Leong
2022-06-14 3:00 ` Ong Boon Leong [this message]
2022-06-14 3:00 ` [PATCH net-next v4 2/5] stmmac: intel: prepare to support 1000BASE-X phy interface setting Ong Boon Leong
2022-06-14 3:00 ` [PATCH net-next v4 3/5] net: pcs: xpcs: add CL37 1000BASE-X AN support Ong Boon Leong
2022-06-14 8:47 ` Russell King (Oracle)
2022-06-15 1:06 ` Ong, Boon Leong
2022-06-14 3:00 ` [PATCH net-next v4 4/5] stmmac: intel: add phy-mode and fixed-link ACPI _DSD setting support Ong Boon Leong
2022-06-14 18:57 ` Andrew Lunn
2022-06-14 3:00 ` [PATCH net-next v4 5/5] net: stmmac: make mdio register skips PHY scanning for fixed-link Ong Boon Leong
2022-06-14 6:55 ` Ong, Boon Leong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220614030030.1249850-2-boon.leong.ong@intel.com \
--to=boon.leong.ong@intel.com \
--cc=Jose.Abreu@synopsys.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=emilio.riva@ericsson.com \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux@armlinux.org.uk \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=peppe.cavallaro@st.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).