From: Bjorn Helgaas <helgaas@kernel.org>
To: Richard Zhu <hongxing.zhu@nxp.com>,
Lucas Stach <l.stach@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>, Mark Brown <broonie@kernel.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Fabio Estevam <festevam@gmail.com>,
Francesco Dolcini <francesco.dolcini@toradex.com>
Cc: linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
linux-imx@nxp.com, Bjorn Helgaas <bhelgaas@google.com>
Subject: Re: [PATCH v12 09/13] PCI: imx6: Turn off regulator when system is in suspend mode
Date: Wed, 15 Jun 2022 18:30:34 -0500 [thread overview]
Message-ID: <20220615233034.GA1056086@bhelgaas> (raw)
In-Reply-To: <20220615231551.1054753-10-helgaas@kernel.org>
On Wed, Jun 15, 2022 at 06:15:47PM -0500, Bjorn Helgaas wrote:
> From: Richard Zhu <hongxing.zhu@nxp.com>
>
> The driver should undo any enables it did itself. The regulator disable
> shouldn't be basing decisions on regulator_is_enabled().
>
> Move the regulator_disable to the suspend function, turn off regulator when
> the system is in suspend mode.
>
> To keep the balance of the regulator usage counter, disable the regulator
> in shutdown.
>
> Link: https://lore.kernel.org/r/1655189942-12678-6-git-send-email-hongxing.z
> hu@nxp.com
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> ---
> drivers/pci/controller/dwc/pci-imx6.c | 19 +++++++------------
> 1 file changed, 7 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 6eddd0b5f628..537b8a2e0e3b 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -670,8 +670,6 @@ static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
>
> static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
> {
> - struct device *dev = imx6_pcie->pci->dev;
> -
> switch (imx6_pcie->drvdata->variant) {
> case IMX7D:
> case IMX8MQ:
> @@ -702,14 +700,6 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
> break;
> }
>
> - if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
> - int ret = regulator_disable(imx6_pcie->vpcie);
> -
> - if (ret)
> - dev_err(dev, "failed to disable vpcie regulator: %d\n",
> - ret);
> - }
> -
> /* Some boards don't have PCIe reset GPIO. */
> if (gpio_is_valid(imx6_pcie->reset_gpio))
> gpio_set_value_cansleep(imx6_pcie->reset_gpio,
> @@ -722,7 +712,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> struct device *dev = pci->dev;
> int ret, err;
>
> - if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
> + if (imx6_pcie->vpcie) {
> ret = regulator_enable(imx6_pcie->vpcie);
> if (ret) {
> dev_err(dev, "failed to enable vpcie regulator: %d\n",
> @@ -796,7 +786,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> return 0;
>
> err_clks:
> - if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
> + if (imx6_pcie->vpcie) {
> ret = regulator_disable(imx6_pcie->vpcie);
> if (ret)
> dev_err(dev, "failed to disable vpcie regulator: %d\n",
> @@ -1023,6 +1013,9 @@ static int imx6_pcie_suspend_noirq(struct device *dev)
> break;
> }
>
> + if (imx6_pcie->vpcie)
> + regulator_disable(imx6_pcie->vpcie);
This is a little bit ugly because imx6_pcie_suspend_noirq() and
imx6_pcie_resume_noirq() are not symmetric.
We call regulator_disable() directly here in
imx6_pcie_suspend_noirq(), but the corresponding regulator_enable() is
buried in imx6_pcie_deassert_core_reset().
It would be nicer if the suspend and resume paths looked more similar,
as rockchip_pcie_suspend_noirq() and rockchip_pcie_resume_noirq() do,
for example.
> return 0;
> }
>
> @@ -1269,6 +1262,8 @@ static void imx6_pcie_shutdown(struct platform_device *pdev)
>
> /* bring down link, so bootloader gets clean state in case of reboot */
> imx6_pcie_assert_core_reset(imx6_pcie);
> + if (imx6_pcie->vpcie)
> + regulator_disable(imx6_pcie->vpcie);
> }
>
> static const struct imx6_pcie_drvdata drvdata[] = {
> --
> 2.25.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-06-15 23:31 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-15 23:15 [PATCH v12 00/13] PCI: imx6: refine codes and add the error propagation Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 01/13] PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
2022-06-15 23:15 ` [PATCH v12 02/13] PCI: imx6: Move PHY management functions together Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
2022-06-15 23:15 ` [PATCH v12 03/13] PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
2022-06-15 23:15 ` [PATCH v12 04/13] PCI: imx6: Move imx6_pcie_clk_disable() earlier Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 05/13] PCI: imx6: Factor out ref clock disable to match enable Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
2022-06-15 23:15 ` [PATCH v12 06/13] PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 07/13] PCI: imx6: Propagate .host_init() errors to caller Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 08/13] PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 09/13] PCI: imx6: Turn off regulator when system is in suspend mode Bjorn Helgaas
2022-06-15 23:30 ` Bjorn Helgaas [this message]
2022-06-16 2:23 ` Hongxing Zhu
2022-06-16 15:56 ` Bjorn Helgaas
2022-06-17 5:57 ` Hongxing Zhu
2022-06-15 23:15 ` [PATCH v12 10/13] PCI: imx6: Mark the link down as non-fatal error Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 11/13] PCI: imx6: Reduce resume time by only starting link if it was up before suspend Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 12/13] PCI: imx6: Do not hide phy driver callbacks and refine the error handling Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 13/13] PCI: imx6: Disable clocks in reverse order of enable Bjorn Helgaas
2022-06-15 23:27 ` Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220615233034.GA1056086@bhelgaas \
--to=helgaas@kernel.org \
--cc=bhelgaas@google.com \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=francesco.dolcini@toradex.com \
--cc=hongxing.zhu@nxp.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).