From: Robin van der Gracht <robin@protonic.nl>
To: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, David Jander <david@protonic.nl>,
Robin van der Gracht <robin@protonic.nl>
Subject: [PATCH] ARM: dts: imx6qdl-prti6q.dtsi: Add applicable properties to usdhc3
Date: Tue, 21 Jun 2022 16:03:34 +0200 [thread overview]
Message-ID: <20220621140334.568446-1-robin@protonic.nl> (raw)
The usdhc3 interface is connected to a soldered eMMC chip on all boards
that import this dtsi. Adding these properties speeds up the device probe
during boot.
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
---
arch/arm/boot/dts/imx6qdl-prti6q.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
index 19578f660b09..f0db0d4471f4 100644
--- a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
@@ -94,6 +94,9 @@ &usdhc3 {
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <8>;
non-removable;
+ no-1-8-v;
+ no-sd;
+ no-sdio;
status = "okay";
};
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-06-21 14:04 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-21 14:03 Robin van der Gracht [this message]
2022-06-21 16:29 ` [PATCH] ARM: dts: imx6qdl-prti6q.dtsi: Add applicable properties to usdhc3 Ahmad Fatoum
2022-06-27 7:47 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220621140334.568446-1-robin@protonic.nl \
--to=robin@protonic.nl \
--cc=david@protonic.nl \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).