[GIT PULL] i.MX fixes for 5.19, round 2

[GIT PULL] i.MX fixes for 5.19, round 2

[Shawn Guo]

The following changes since commit 7c7eaeefb0ae226da9233d5db265652d900e1fcb:

  soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain (2022-06-14 11:53:42 +0800)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-5.19-2

for you to fetch changes up to 8630354f42bef90f51e003a7ce62b69aceb735ca:

  arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings (2022-06-27 15:55:41 +0800)

----------------------------------------------------------------
i.MX fixes for 5.19, round 2:

- Fix the SDIO description for imx7d-smegw01 board to ensure there is
  no communication made at 1.8V.
- Fix pgc_ispdwp power-domain clock, which should be
  IMX8MP_CLK_MEDIA_ISP_ROOT.
- Re-enable framebuffer support in mxs_defconfig to fix a Kconfig
  regression.
- A series from Peng Fan (and Sherry Sun) fixing various pads on i.MX8MP
  based boards to leave reserved bits untouched.

----------------------------------------------------------------
Fabio Estevam (2):
      ARM: dts: imx7d-smegw01: Fix the SDIO description
      ARM: mxs_defconfig: Enable the framebuffer

Peng Fan (14):
      arm64: dts: imx8mp: correct clock of pgc_ispdwp
      arm64: dts: imx8mp-evk: correct mmc pad settings
      arm64: dts: imx8mp-evk: correct gpio-led pad settings
      arm64: dts: imx8mp-evk: correct vbus pad settings
      arm64: dts: imx8mp-evk: correct eqos pad settings
      arm64: dts: imx8mp-evk: correct vbus pad settings
      arm64: dts: imx8mp-evk: correct I2C5 pad settings
      arm64: dts: imx8mp-evk: correct I2C1 pad settings
      arm64: dts: imx8mp-evk: correct I2C3 pad settings
      arm64: dts: imx8mp-venice-gw74xx: correct pad settings
      arm64: dts: imx8mp-phyboard-pollux-rdk: correct uart pad settings
      arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings
      arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings
      arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings

Sherry Sun (1):
      arm64: dts: imx8mp-evk: correct the uart2 pinctl value

 arch/arm/boot/dts/imx7d-smegw01.dts                |   4 +-
 arch/arm/configs/mxs_defconfig                     |   1 +
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts       |  88 ++++++++--------
 .../dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts  |  40 +++----
 .../dts/freescale/imx8mp-phyboard-pollux-rdk.dts   |  48 ++++-----
 .../boot/dts/freescale/imx8mp-venice-gw74xx.dts    | 116 ++++++++++-----------
 arch/arm64/boot/dts/freescale/imx8mp.dtsi          |   2 +-
 7 files changed, 149 insertions(+), 150 deletions(-)

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel