From: Aparna M <a-m1@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
<ada@thorsis.com>, <pavel@ucw.cz>
Cc: <praneeth@ti.com>, <robh+dt@kernel.org>, <devarsht@ti.com>,
<s-adivi@ti.com>, <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-leds@vger.kernel.org>
Subject: [PATCH v2] arm64: dts: ti: k3-am642-sk: Add DT entry for onboard LEDs
Date: Wed, 29 Jun 2022 13:28:59 +0530 [thread overview]
Message-ID: <20220629075859.6939-1-a-m1@ti.com> (raw)
AM642 SK has 8 leds connected to tpic2810 onboard. Add support for these
gpio leds.
Signed-off-by: Aparna M <a-m1@ti.com>
---
This patch is dependent on:
https://lore.kernel.org/all/20220223174215.17838-1-a-m1@ti.com/
v1 -> v2: Fixed led-controller name and changed led-7 funtion to show
heartbeat functionality. Rebased on top for 5.19-rc4.
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 69 ++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 59f506cbd275..47476fd068a8 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -150,6 +150,67 @@
vin-supply = <&com8_ls_en>;
gpio = <&main_gpio0 48 GPIO_ACTIVE_HIGH>;
};
+
+ led-controller {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <1>;
+ gpios = <&exp2 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-1 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <2>;
+ gpios = <&exp2 1 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-2 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <3>;
+ gpios = <&exp2 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-3 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <4>;
+ gpios = <&exp2 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-4 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <5>;
+ gpios = <&exp2 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-5 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <6>;
+ gpios = <&exp2 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-6 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <7>;
+ gpios = <&exp2 6 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-7 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_HEARTBEAT;
+ function-enumerator = <8>;
+ linux,default-trigger = "heartbeat";
+ gpios = <&exp2 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&main_pmx0 {
@@ -316,6 +377,14 @@
"VPP_LDO_EN", "RPI_PS_3V3_En",
"RPI_PS_5V0_En", "RPI_HAT_DETECT";
};
+
+ exp2: gpio@60 {
+ compatible = "ti,tpic2810";
+ reg = <0x60>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8";
+ };
};
&main_i2c3 {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-06-29 8:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-29 7:58 Aparna M [this message]
2022-07-06 23:39 ` [PATCH v2] arm64: dts: ti: k3-am642-sk: Add DT entry for onboard LEDs Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220629075859.6939-1-a-m1@ti.com \
--to=a-m1@ti.com \
--cc=ada@thorsis.com \
--cc=devarsht@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=nm@ti.com \
--cc=pavel@ucw.cz \
--cc=praneeth@ti.com \
--cc=robh+dt@kernel.org \
--cc=s-adivi@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox