Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali@kernel.org>
To: Russell King <linux@armlinux.org.uk>,
	Andrew Lunn <andrew@lunn.ch>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Gregory Clement <gregory.clement@bootlin.com>,
	Jason Gunthorpe <jgg@nvidia.com>
Cc: linux-arm-kernel@lists.infradead.org, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/2] ARM: Marvell: Update PCIe fixup
Date: Thu, 7 Jul 2022 20:31:12 +0200	[thread overview]
Message-ID: <20220707183112.f7dgz3lzordxnqhj@pali> (raw)
In-Reply-To: <20220514182125.xfvnw7yj2rmxpi7l@pali>

PING? I have not received any reply!

On Saturday 14 May 2022 20:21:25 Pali Rohár wrote:
> On Tuesday 09 November 2021 23:53:32 Pali Rohár wrote:
> > On Tuesday 02 November 2021 18:12:58 Pali Rohár wrote:
> > > - The code relies on rc_pci_fixup being called, which only happens
> > >   when CONFIG_PCI_QUIRKS is enabled, so add that to Kconfig. Omitting
> > >   this causes a booting failure with a non-obvious cause.
> > > - Update rc_pci_fixup to set the class properly, copying the
> > >   more modern style from other places
> > > - Correct the rc_pci_fixup comment
> > > 
> > > This patch just re-applies commit 1dc831bf53fd ("ARM: Kirkwood: Update
> > > PCI-E fixup") for all other Marvell ARM platforms which have same buggy
> > > PCIe controller and do not use pci-mvebu.c controller driver yet.
> > > 
> > > Long-term goal for these Marvell ARM platforms should be conversion to
> > > pci-mvebu.c controller driver and removal of these fixups in arch code.
> > > 
> > > Signed-off-by: Pali Rohár <pali@kernel.org>
> > > Cc: Jason Gunthorpe <jgg@nvidia.com>
> > > Cc: stable@vger.kernel.org
> > 
> > Hello! Patch 2/2 was already applied into mips-next. Could you review
> > also this patch 1/2?
> 
> PING?
> 
> > > 
> > > ---
> > > Changes in v2:
> > > * Move MIPS change into separate patch
> > > * Add information that this patch is for platforms which do not use pci-mvebu.c
> > > ---
> > >  arch/arm/Kconfig              |  1 +
> > >  arch/arm/mach-dove/pcie.c     | 11 ++++++++---
> > >  arch/arm/mach-mv78xx0/pcie.c  | 11 ++++++++---
> > >  arch/arm/mach-orion5x/Kconfig |  1 +
> > >  arch/arm/mach-orion5x/pci.c   | 12 +++++++++---
> > >  5 files changed, 27 insertions(+), 9 deletions(-)
> > > 
> > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > > index fc196421b2ce..9f157e973555 100644
> > > --- a/arch/arm/Kconfig
> > > +++ b/arch/arm/Kconfig
> > > @@ -400,6 +400,7 @@ config ARCH_DOVE
> > >  	select GENERIC_IRQ_MULTI_HANDLER
> > >  	select GPIOLIB
> > >  	select HAVE_PCI
> > > +	select PCI_QUIRKS if PCI
> > >  	select MVEBU_MBUS
> > >  	select PINCTRL
> > >  	select PINCTRL_DOVE
> > > diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
> > > index ee91ac6b5ebf..ecf057a0f5ba 100644
> > > --- a/arch/arm/mach-dove/pcie.c
> > > +++ b/arch/arm/mach-dove/pcie.c
> > > @@ -135,14 +135,19 @@ static struct pci_ops pcie_ops = {
> > >  	.write = pcie_wr_conf,
> > >  };
> > >  
> > > +/*
> > > + * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
> > > + * is operating as a root complex this needs to be switched to
> > > + * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
> > > + * the device. Decoding setup is handled by the orion code.
> > > + */
> > >  static void rc_pci_fixup(struct pci_dev *dev)
> > >  {
> > > -	/*
> > > -	 * Prevent enumeration of root complex.
> > > -	 */
> > >  	if (dev->bus->parent == NULL && dev->devfn == 0) {
> > >  		int i;
> > >  
> > > +		dev->class &= 0xff;
> > > +		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
> > >  		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
> > >  			dev->resource[i].start = 0;
> > >  			dev->resource[i].end   = 0;
> > > diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
> > > index 636d84b40466..9362b5fc116f 100644
> > > --- a/arch/arm/mach-mv78xx0/pcie.c
> > > +++ b/arch/arm/mach-mv78xx0/pcie.c
> > > @@ -177,14 +177,19 @@ static struct pci_ops pcie_ops = {
> > >  	.write = pcie_wr_conf,
> > >  };
> > >  
> > > +/*
> > > + * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
> > > + * is operating as a root complex this needs to be switched to
> > > + * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
> > > + * the device. Decoding setup is handled by the orion code.
> > > + */
> > >  static void rc_pci_fixup(struct pci_dev *dev)
> > >  {
> > > -	/*
> > > -	 * Prevent enumeration of root complex.
> > > -	 */
> > >  	if (dev->bus->parent == NULL && dev->devfn == 0) {
> > >  		int i;
> > >  
> > > +		dev->class &= 0xff;
> > > +		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
> > >  		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
> > >  			dev->resource[i].start = 0;
> > >  			dev->resource[i].end   = 0;
> > > diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
> > > index e94a61901ffd..7189a5b1ec46 100644
> > > --- a/arch/arm/mach-orion5x/Kconfig
> > > +++ b/arch/arm/mach-orion5x/Kconfig
> > > @@ -6,6 +6,7 @@ menuconfig ARCH_ORION5X
> > >  	select GPIOLIB
> > >  	select MVEBU_MBUS
> > >  	select FORCE_PCI
> > > +	select PCI_QUIRKS
> > >  	select PHYLIB if NETDEVICES
> > >  	select PLAT_ORION_LEGACY
> > >  	help
> > > diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
> > > index 76951bfbacf5..5145fe89702e 100644
> > > --- a/arch/arm/mach-orion5x/pci.c
> > > +++ b/arch/arm/mach-orion5x/pci.c
> > > @@ -509,14 +509,20 @@ static int __init pci_setup(struct pci_sys_data *sys)
> > >  /*****************************************************************************
> > >   * General PCIe + PCI
> > >   ****************************************************************************/
> > > +
> > > +/*
> > > + * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
> > > + * is operating as a root complex this needs to be switched to
> > > + * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
> > > + * the device. Decoding setup is handled by the orion code.
> > > + */
> > >  static void rc_pci_fixup(struct pci_dev *dev)
> > >  {
> > > -	/*
> > > -	 * Prevent enumeration of root complex.
> > > -	 */
> > >  	if (dev->bus->parent == NULL && dev->devfn == 0) {
> > >  		int i;
> > >  
> > > +		dev->class &= 0xff;
> > > +		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
> > >  		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
> > >  			dev->resource[i].start = 0;
> > >  			dev->resource[i].end   = 0;
> > > -- 
> > > 2.20.1
> > > 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-07-07 18:32 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-01 15:04 [PATCH] PCI: Marvell: Update PCIe fixup Pali Rohár
2021-11-01 16:27 ` Jason Gunthorpe
2021-11-01 17:56   ` Pali Rohár
2021-11-01 18:03     ` Jason Gunthorpe
2021-11-02  8:42 ` Thomas Bogendoerfer
2021-11-02  9:02   ` Pali Rohár
2021-11-02  9:47     ` Thomas Bogendoerfer
2021-11-02 10:00       ` Pali Rohár
2021-11-02 12:35         ` Maciej W. Rozycki
2021-11-02 12:58           ` Pali Rohár
2021-11-02 14:01             ` Maciej W. Rozycki
2021-11-02 14:49               ` Pali Rohár
2021-11-02 15:48                 ` Pali Rohár
2021-11-02 17:03                   ` Stefan Roese
2021-11-03 14:59                   ` Maciej W. Rozycki
2021-11-03 14:49                 ` Maciej W. Rozycki
2021-11-03 15:03                   ` Pali Rohár
2021-11-02 15:02         ` Thomas Bogendoerfer
2021-11-02 15:13           ` Pali Rohár
2021-11-09 23:42             ` Pali Rohár
2021-11-10  8:55               ` Thomas Bogendoerfer
2021-11-02 17:12 ` [PATCH v2 1/2] ARM: " Pali Rohár
2021-11-09 22:53   ` Pali Rohár
2022-05-14 18:21     ` Pali Rohár
2022-07-07 18:31       ` Pali Rohár [this message]
2022-07-07 19:22         ` Russell King (Oracle)
2022-02-19 14:30   ` Pali Rohár
2022-07-18 10:34     ` Gregory CLEMENT

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220707183112.f7dgz3lzordxnqhj@pali \
    --to=pali@kernel.org \
    --cc=andrew@lunn.ch \
    --cc=gregory.clement@bootlin.com \
    --cc=jgg@nvidia.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=sebastian.hesselbarth@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox