Re: [PATCH] arm64: defconfig: Enable Qualcomm SC8280XP providers

From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Marcel Ziswiler <marcel.ziswiler@toradex.com>,
	Vinod Koul <vkoul@kernel.org>,
	Biju Das <biju.das.jz@bp.renesas.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	Johan Hovold <johan+linaro@kernel.org>
Subject: Re: [PATCH] arm64: defconfig: Enable Qualcomm SC8280XP providers
Date: Sat, 9 Jul 2022 12:04:26 +0530	[thread overview]
Message-ID: <20220709063426.GF5063@thinkpad> (raw)
In-Reply-To: <YsibzePW58/DKWrI@ripper>

On Fri, Jul 08, 2022 at 02:04:13PM -0700, Bjorn Andersson wrote:
> On Thu 07 Jul 10:41 PDT 2022, Dmitry Baryshkov wrote:
> 
> > On Thu, 7 Jul 2022 at 19:07, Bjorn Andersson <bjorn.andersson@linaro.org> wrote:
> > >
> > > The Qualcomm SC8280XP need the global clock controller, interconnect
> > > provider and TLMM pinctrl in order to boot. Enable these as builtin, as
> > > they are needed in order to provide e.g. UART.
> > >
> > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > > ---
> > >  arch/arm64/configs/defconfig | 3 +++
> > >  1 file changed, 3 insertions(+)
> > >
> > > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> > > index d2615b37d857..8e44f6a2172c 100644
> > > --- a/arch/arm64/configs/defconfig
> > > +++ b/arch/arm64/configs/defconfig
> > > @@ -541,6 +541,7 @@ CONFIG_PINCTRL_QDF2XXX=y
> > >  CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
> > >  CONFIG_PINCTRL_SC7180=y
> > >  CONFIG_PINCTRL_SC7280=y
> > > +CONFIG_PINCTRL_SC8280XP=y
> > >  CONFIG_PINCTRL_SDM845=y
> > >  CONFIG_PINCTRL_SM8150=y
> > >  CONFIG_PINCTRL_SM8250=y
> > > @@ -1056,6 +1057,7 @@ CONFIG_MSM_GCC_8998=y
> > >  CONFIG_QCS_GCC_404=y
> > >  CONFIG_SC_GCC_7180=y
> > >  CONFIG_SC_GCC_7280=y
> > > +CONFIG_SC_GCC_8280XP=y
> > >  CONFIG_SDM_CAMCC_845=m
> > >  CONFIG_SDM_GPUCC_845=y
> > >  CONFIG_SDM_VIDEOCC_845=y
> > > @@ -1266,6 +1268,7 @@ CONFIG_INTERCONNECT_QCOM_OSM_L3=m
> > >  CONFIG_INTERCONNECT_QCOM_QCS404=m
> > >  CONFIG_INTERCONNECT_QCOM_SC7180=m
> > >  CONFIG_INTERCONNECT_QCOM_SC7280=y
> > > +CONFIG_INTERCONNECT_QCOM_SC8280XP=y
> > 
> > = m? I see other SoCs build interconnect drivers as modules (well,
> > except sdm845).
> > 
> 
> I have interconnects specified for the UART and keeping the interconnect
> provider as module means that the serial  until after late_initcall,
> which in my testing implies that systemd doesn't find a proper console.
> 
> Perhaps this is something I'm doing incorrectly?
> 

Only couple of SoCs have defined interconnect providers for UART, so I think
it is fine to make it built-in. It will get extended to most of the SoCs in
future when they get optimized.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> Regards,
> Bjorn
> 
> > >  CONFIG_INTERCONNECT_QCOM_SDM845=y
> > >  CONFIG_INTERCONNECT_QCOM_SM8150=m
> > >  CONFIG_INTERCONNECT_QCOM_SM8250=m
> > > --
> > > 2.35.1
> > >
> > 
> > 
> > -- 
> > With best wishes
> > Dmitry

-- 
மணிவண்ணன் சதாசிவம்

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel