From: Vladimir Oltean <vladimir.oltean@nxp.com>
To: linux-arm-kernel@lists.infradead.org
Cc: "Andrew Lunn" <andrew@lunn.ch>,
"Gregory Clement" <gregory.clement@bootlin.com>,
"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
"Linus Walleij" <linus.walleij@linaro.org>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
"Marek Behún" <kabel@kernel.org>, "Pali Rohár" <pali@kernel.org>
Subject: [PATCH 1/2] pinctrl: armada-37xx: make irq_lock a raw spinlock to avoid invalid wait context
Date: Sun, 17 Jul 2022 02:37:44 +0300 [thread overview]
Message-ID: <20220716233745.1704677-2-vladimir.oltean@nxp.com> (raw)
In-Reply-To: <20220716233745.1704677-1-vladimir.oltean@nxp.com>
The irqchip->irq_set_type method is called by __irq_set_trigger() under
the desc->lock raw spinlock.
The armada-37xx implementation, armada_37xx_irq_set_type(), takes a
plain spinlock, the kind that becomes sleepable on RT.
Therefore, this is an invalid locking scheme for which we get a kernel
splat stating just that ("[ BUG: Invalid wait context ]"), because the
context in which the plain spinlock may sleep is atomic due to the raw
spinlock. We need to go raw spinlocks all the way.
Replace the driver's irq_lock with a raw spinlock, to disable preemption
even on RT.
Fixes: 2f227605394b ("pinctrl: armada-37xx: Add irqchip support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 38 ++++++++++-----------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
index a140b6bfbfaa..8fddc67271b4 100644
--- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
@@ -102,7 +102,7 @@ struct armada_37xx_pinctrl {
struct device *dev;
struct gpio_chip gpio_chip;
struct irq_chip irq_chip;
- spinlock_t irq_lock;
+ raw_spinlock_t irq_lock;
struct pinctrl_desc pctl;
struct pinctrl_dev *pctl_dev;
struct armada_37xx_pin_group *groups;
@@ -523,9 +523,9 @@ static void armada_37xx_irq_ack(struct irq_data *d)
unsigned long flags;
armada_37xx_irq_update_reg(®, d);
- spin_lock_irqsave(&info->irq_lock, flags);
+ raw_spin_lock_irqsave(&info->irq_lock, flags);
writel(d->mask, info->base + reg);
- spin_unlock_irqrestore(&info->irq_lock, flags);
+ raw_spin_unlock_irqrestore(&info->irq_lock, flags);
}
static void armada_37xx_irq_mask(struct irq_data *d)
@@ -536,10 +536,10 @@ static void armada_37xx_irq_mask(struct irq_data *d)
unsigned long flags;
armada_37xx_irq_update_reg(®, d);
- spin_lock_irqsave(&info->irq_lock, flags);
+ raw_spin_lock_irqsave(&info->irq_lock, flags);
val = readl(info->base + reg);
writel(val & ~d->mask, info->base + reg);
- spin_unlock_irqrestore(&info->irq_lock, flags);
+ raw_spin_unlock_irqrestore(&info->irq_lock, flags);
}
static void armada_37xx_irq_unmask(struct irq_data *d)
@@ -550,10 +550,10 @@ static void armada_37xx_irq_unmask(struct irq_data *d)
unsigned long flags;
armada_37xx_irq_update_reg(®, d);
- spin_lock_irqsave(&info->irq_lock, flags);
+ raw_spin_lock_irqsave(&info->irq_lock, flags);
val = readl(info->base + reg);
writel(val | d->mask, info->base + reg);
- spin_unlock_irqrestore(&info->irq_lock, flags);
+ raw_spin_unlock_irqrestore(&info->irq_lock, flags);
}
static int armada_37xx_irq_set_wake(struct irq_data *d, unsigned int on)
@@ -564,14 +564,14 @@ static int armada_37xx_irq_set_wake(struct irq_data *d, unsigned int on)
unsigned long flags;
armada_37xx_irq_update_reg(®, d);
- spin_lock_irqsave(&info->irq_lock, flags);
+ raw_spin_lock_irqsave(&info->irq_lock, flags);
val = readl(info->base + reg);
if (on)
val |= (BIT(d->hwirq % GPIO_PER_REG));
else
val &= ~(BIT(d->hwirq % GPIO_PER_REG));
writel(val, info->base + reg);
- spin_unlock_irqrestore(&info->irq_lock, flags);
+ raw_spin_unlock_irqrestore(&info->irq_lock, flags);
return 0;
}
@@ -583,7 +583,7 @@ static int armada_37xx_irq_set_type(struct irq_data *d, unsigned int type)
u32 val, reg = IRQ_POL;
unsigned long flags;
- spin_lock_irqsave(&info->irq_lock, flags);
+ raw_spin_lock_irqsave(&info->irq_lock, flags);
armada_37xx_irq_update_reg(®, d);
val = readl(info->base + reg);
switch (type) {
@@ -607,11 +607,11 @@ static int armada_37xx_irq_set_type(struct irq_data *d, unsigned int type)
break;
}
default:
- spin_unlock_irqrestore(&info->irq_lock, flags);
+ raw_spin_unlock_irqrestore(&info->irq_lock, flags);
return -EINVAL;
}
writel(val, info->base + reg);
- spin_unlock_irqrestore(&info->irq_lock, flags);
+ raw_spin_unlock_irqrestore(&info->irq_lock, flags);
return 0;
}
@@ -626,7 +626,7 @@ static int armada_37xx_edge_both_irq_swap_pol(struct armada_37xx_pinctrl *info,
regmap_read(info->regmap, INPUT_VAL + 4*reg_idx, &l);
- spin_lock_irqsave(&info->irq_lock, flags);
+ raw_spin_lock_irqsave(&info->irq_lock, flags);
p = readl(info->base + IRQ_POL + 4 * reg_idx);
if ((p ^ l) & (1 << bit_num)) {
/*
@@ -647,7 +647,7 @@ static int armada_37xx_edge_both_irq_swap_pol(struct armada_37xx_pinctrl *info,
ret = -1;
}
- spin_unlock_irqrestore(&info->irq_lock, flags);
+ raw_spin_unlock_irqrestore(&info->irq_lock, flags);
return ret;
}
@@ -664,11 +664,11 @@ static void armada_37xx_irq_handler(struct irq_desc *desc)
u32 status;
unsigned long flags;
- spin_lock_irqsave(&info->irq_lock, flags);
+ raw_spin_lock_irqsave(&info->irq_lock, flags);
status = readl_relaxed(info->base + IRQ_STATUS + 4 * i);
/* Manage only the interrupt that was enabled */
status &= readl_relaxed(info->base + IRQ_EN + 4 * i);
- spin_unlock_irqrestore(&info->irq_lock, flags);
+ raw_spin_unlock_irqrestore(&info->irq_lock, flags);
while (status) {
u32 hwirq = ffs(status) - 1;
u32 virq = irq_find_mapping(d, hwirq +
@@ -695,12 +695,12 @@ static void armada_37xx_irq_handler(struct irq_desc *desc)
update_status:
/* Update status in case a new IRQ appears */
- spin_lock_irqsave(&info->irq_lock, flags);
+ raw_spin_lock_irqsave(&info->irq_lock, flags);
status = readl_relaxed(info->base +
IRQ_STATUS + 4 * i);
/* Manage only the interrupt that was enabled */
status &= readl_relaxed(info->base + IRQ_EN + 4 * i);
- spin_unlock_irqrestore(&info->irq_lock, flags);
+ raw_spin_unlock_irqrestore(&info->irq_lock, flags);
}
}
chained_irq_exit(chip, desc);
@@ -731,7 +731,7 @@ static int armada_37xx_irqchip_register(struct platform_device *pdev,
struct device *dev = &pdev->dev;
unsigned int i, nr_irq_parent;
- spin_lock_init(&info->irq_lock);
+ raw_spin_lock_init(&info->irq_lock);
nr_irq_parent = of_irq_count(np);
if (!nr_irq_parent) {
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-07-16 23:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-16 23:37 [PATCH 0/2] Fix kernel splats on boot with armada-37xx irqchip driver Vladimir Oltean
2022-07-16 23:37 ` Vladimir Oltean [this message]
2022-07-16 23:37 ` [PATCH 2/2] pinctrl: armada-37xx: use raw spinlocks for regmap to avoid invalid wait context Vladimir Oltean
2022-07-18 13:43 ` [PATCH 0/2] Fix kernel splats on boot with armada-37xx irqchip driver Linus Walleij
2022-07-18 14:06 ` Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220716233745.1704677-2-vladimir.oltean@nxp.com \
--to=vladimir.oltean@nxp.com \
--cc=andrew@lunn.ch \
--cc=gregory.clement@bootlin.com \
--cc=kabel@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pali@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox