[PATCH v12 0/1] Add basic node support for MediaTek MT8186 SoC

[Allen-KH Cheng <allen-kh.cheng@mediatek.com>]

From: Allen-kh Cheng <allen-kh.cheng@mediatek.corp-partner.google.com>

MT8186 is a SoC based on 64bit ARMv8 architecture. It contains 6 CA55 and
2 CA76 cores. MT8186 share many HW IP with MT65xx series. This patchset was 
tested on MT8186 evaluation board to shell.

This series is based on tag: next-20220728, linux-next/master
Since we have a another dts series of mt8195 [1] which is waiting for review from
maintainers. I remove power domains controller node from this series.

There are some corrections in mt8186 hardware bindings. We need to apply the below patches.
https://patchwork.kernel.org/project/linux-mediatek/patch/20220725110702.11362-2-allen-kh.cheng@mediatek.com/
https://patchwork.kernel.org/project/linux-mediatek/patch/20220725110702.11362-3-allen-kh.cheng@mediatek.com/
https://patchwork.kernel.org/project/linux-mediatek/patch/20220720130604.14113-2-allen-kh.cheng@mediatek.com/
https://patchwork.kernel.org/project/linux-mediatek/patch/20220721014845.19044-2-allen-kh.cheng@mediatek.com/

[1]
https://patchwork.kernel.org/project/linux-mediatek/list/?series=663978

changes since v11:
 - add #cooling-cells in cpu nodes
 - add pmu nodes for mt8186
 - change #interrupt-cells from 3 to 4
 - correct interrupts property in each nodes for 4 interrupt cells
 - remove power domains controller node
 - move #address-cells and #size-cells into mt8186.dts
 - remove unused ahb_cg clock in mmc0
 - add efuse node
 - add dsi node and remove dpi node
 - move i2c status position in mt8186-evb.dts
 - change i2c child nodee name in pio node to *-pins
 - change property from mediatek,drive-strength-adv to drive-strength-microamp in i2c child nodes of pio
 - change drive-strength value from MTK_DRIVE_4mA to 4 in i2c child nodes of pio
 - change i2c child nodes from pins-sda-sc1 to pins-bus
 - correct pintctrl clk names

changes since v10:
 - remove merged PATCHes
 - add pmu nodes
 - add #cooling-cells
 - change #interrupt-cells number from 3 to 4
 - remove power domains controller node
 - move #address-cells/#size-cells into mt8186.dts from evb dts for i2c
 - move status = 'okay' position in i2cx
 - fix pinctrl patternproperties name in pio
 - add efuse node
 - fix dsi node
 - add #reset-cells in infracfg_ao: syscon

changes since v9:
 - remove some merged PATCHs from series
 - reorder nodes in dts (cpu-map)
 - remove okay status in auxadc
 - remove unnecessary suffix node name for i2c
 - add pwm node 
 - add dsi-phy node 
 - add dpi node 

changes since v9:
 - add one space before equal sign of drive-strength-adv
 - corect compatible name for big cores (ca76)
 - use upper case of address in pinctrl
 - add pwrap node
 - add pwm node

changes since v8:
 - change name from pins_bus to pins-sda-scl
 - correct email address
 - add capacity-dmips-mhz for each CPU
 - add ppi-partitions in gic node
 - change name to power-domain
 - remove status "okay" in scp node
 - update timer and pericfg compatible in series

changes since v7:
 - add scp&auxadc node

changes since v6:
 - remove unnecessary blank line

changes since v5:
 - replace Mediatek a to MediaTek
 - use GPL-2.0-only OR BSD-2-Clause

changes since v4:
 - correct driver clock of mt8186
 - add power domains controller and clock controllers
 - add pinctrl, usb host, spi and i2c nodes
 - add node status in mt8186-evb.dts
 - correct some dtbs_check warnings

changes since v3:
 - remove serial, mmc and phy patch from series. (already merged)
 - remove mcusysoff node
 - move oscillator nodes at the head of dts
 - change name from usb-phy to t-phy

changes since v2:
 - add soc {} in mt8186.dtsi

changes since v1:
 - add dt-bindings: arm: Add compatible for MediaTek MT8186

Allen-KH Cheng (1):
  arm64: dts: Add MediaTek MT8186 dts and evaluation board and Makefile

 arch/arm64/boot/dts/mediatek/Makefile       |   1 +
 arch/arm64/boot/dts/mediatek/mt8186-evb.dts | 238 ++++++
 arch/arm64/boot/dts/mediatek/mt8186.dtsi    | 874 ++++++++++++++++++++
 3 files changed, 1113 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-evb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8186.dtsi

-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel