[PATCH AUTOSEL 5.15 03/45] arm64: kernel: drop unnecessary PoC cache clean+invalidate

[PATCH AUTOSEL 5.15 03/45] arm64: kernel: drop unnecessary PoC cache clean+invalidate

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit 2e945851e26836c0f2d34be3763ddf55870e49fe ]

Some early boot code runs before the virtual placement of the kernel is
finalized, and we used to go back to the very start and recreate the ID
map along with the page tables describing the virtual kernel mapping,
and this involved setting some global variables with the caches off.

In order to ensure that global state created by the KASLR code is not
corrupted by the cache invalidation that occurs in that case, we needed
to clean those global variables to the PoC explicitly.

This is no longer needed now that the ID map is created only once (and
the associated global variable updates are no longer repeated). So drop
the cache maintenance that is no longer necessary.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220624150651.1358849-9-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/kaslr.c | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/arch/arm64/kernel/kaslr.c b/arch/arm64/kernel/kaslr.c
index 418b2bba1521..d5542666182f 100644
--- a/arch/arm64/kernel/kaslr.c
+++ b/arch/arm64/kernel/kaslr.c
@@ -13,7 +13,6 @@
 #include <linux/pgtable.h>
 #include <linux/random.h>
 
-#include <asm/cacheflush.h>
 #include <asm/fixmap.h>
 #include <asm/kernel-pgtable.h>
 #include <asm/memory.h>
@@ -72,9 +71,6 @@ u64 __init kaslr_early_init(void)
 	 * we end up running with module randomization disabled.
 	 */
 	module_alloc_base = (u64)_etext - MODULES_VSIZE;
-	dcache_clean_inval_poc((unsigned long)&module_alloc_base,
-			    (unsigned long)&module_alloc_base +
-				    sizeof(module_alloc_base));
 
 	/*
 	 * Try to map the FDT early. If this fails, we simply bail,
@@ -174,13 +170,6 @@ u64 __init kaslr_early_init(void)
 	module_alloc_base += (module_range * (seed & ((1 << 21) - 1))) >> 21;
 	module_alloc_base &= PAGE_MASK;
 
-	dcache_clean_inval_poc((unsigned long)&module_alloc_base,
-			    (unsigned long)&module_alloc_base +
-				    sizeof(module_alloc_base));
-	dcache_clean_inval_poc((unsigned long)&memstart_offset_seed,
-			    (unsigned long)&memstart_offset_seed +
-				    sizeof(memstart_offset_seed));
-
 	return offset;
 }
 
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 04/45] arm64: mm: provide idmap pointer to cpu_replace_ttbr1()

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit 1682c45b920643cbde31d8a5b7ca7c2be92d6928 ]

In preparation for changing the way we initialize the permanent ID map,
update cpu_replace_ttbr1() so we can use it with the initial ID map as
well.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-11-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/mmu_context.h | 13 +++++++++----
 arch/arm64/kernel/cpufeature.c       |  2 +-
 arch/arm64/kernel/suspend.c          |  2 +-
 arch/arm64/mm/kasan_init.c           |  4 ++--
 arch/arm64/mm/mmu.c                  |  2 +-
 5 files changed, 14 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h
index f4ba93d4ffeb..24ed534bb417 100644
--- a/arch/arm64/include/asm/mmu_context.h
+++ b/arch/arm64/include/asm/mmu_context.h
@@ -106,20 +106,25 @@ static inline void cpu_uninstall_idmap(void)
 		cpu_switch_mm(mm->pgd, mm);
 }
 
-static inline void cpu_install_idmap(void)
+static inline void __cpu_install_idmap(pgd_t *idmap)
 {
 	cpu_set_reserved_ttbr0();
 	local_flush_tlb_all();
 	cpu_set_idmap_tcr_t0sz();
 
-	cpu_switch_mm(lm_alias(idmap_pg_dir), &init_mm);
+	cpu_switch_mm(lm_alias(idmap), &init_mm);
+}
+
+static inline void cpu_install_idmap(void)
+{
+	__cpu_install_idmap(idmap_pg_dir);
 }
 
 /*
  * Atomically replaces the active TTBR1_EL1 PGD with a new VA-compatible PGD,
  * avoiding the possibility of conflicting TLB entries being allocated.
  */
-static inline void __nocfi cpu_replace_ttbr1(pgd_t *pgdp)
+static inline void __nocfi cpu_replace_ttbr1(pgd_t *pgdp, pgd_t *idmap)
 {
 	typedef void (ttbr_replace_func)(phys_addr_t);
 	extern ttbr_replace_func idmap_cpu_replace_ttbr1;
@@ -142,7 +147,7 @@ static inline void __nocfi cpu_replace_ttbr1(pgd_t *pgdp)
 
 	replace_phys = (void *)__pa_symbol(function_nocfi(idmap_cpu_replace_ttbr1));
 
-	cpu_install_idmap();
+	__cpu_install_idmap(idmap);
 	replace_phys(ttbr1);
 	cpu_uninstall_idmap();
 }
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index e71c9cfb46e8..e826509823a6 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -3013,7 +3013,7 @@ subsys_initcall_sync(init_32bit_el0_mask);
 
 static void __maybe_unused cpu_enable_cnp(struct arm64_cpu_capabilities const *cap)
 {
-	cpu_replace_ttbr1(lm_alias(swapper_pg_dir));
+	cpu_replace_ttbr1(lm_alias(swapper_pg_dir), idmap_pg_dir);
 }
 
 /*
diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c
index 19ee7c33769d..40bf1551d1ad 100644
--- a/arch/arm64/kernel/suspend.c
+++ b/arch/arm64/kernel/suspend.c
@@ -52,7 +52,7 @@ void notrace __cpu_suspend_exit(void)
 
 	/* Restore CnP bit in TTBR1_EL1 */
 	if (system_supports_cnp())
-		cpu_replace_ttbr1(lm_alias(swapper_pg_dir));
+		cpu_replace_ttbr1(lm_alias(swapper_pg_dir), idmap_pg_dir);
 
 	/*
 	 * PSTATE was not saved over suspend/resume, re-enable any detected
diff --git a/arch/arm64/mm/kasan_init.c b/arch/arm64/mm/kasan_init.c
index 61b52a92b8b6..674863348f67 100644
--- a/arch/arm64/mm/kasan_init.c
+++ b/arch/arm64/mm/kasan_init.c
@@ -235,7 +235,7 @@ static void __init kasan_init_shadow(void)
 	 */
 	memcpy(tmp_pg_dir, swapper_pg_dir, sizeof(tmp_pg_dir));
 	dsb(ishst);
-	cpu_replace_ttbr1(lm_alias(tmp_pg_dir));
+	cpu_replace_ttbr1(lm_alias(tmp_pg_dir), idmap_pg_dir);
 
 	clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END);
 
@@ -279,7 +279,7 @@ static void __init kasan_init_shadow(void)
 				PAGE_KERNEL_RO));
 
 	memset(kasan_early_shadow_page, KASAN_SHADOW_INIT, PAGE_SIZE);
-	cpu_replace_ttbr1(lm_alias(swapper_pg_dir));
+	cpu_replace_ttbr1(lm_alias(swapper_pg_dir), idmap_pg_dir);
 }
 
 static void __init kasan_init_depth(void)
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 6680689242df..984f1f503328 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -780,7 +780,7 @@ void __init paging_init(void)
 
 	pgd_clear_fixmap();
 
-	cpu_replace_ttbr1(lm_alias(swapper_pg_dir));
+	cpu_replace_ttbr1(lm_alias(swapper_pg_dir), idmap_pg_dir);
 	init_mm.pgd = swapper_pg_dir;
 
 	memblock_free(__pa_symbol(init_pg_dir),
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 05/45] arm64: kaslr: defer initialization to initcall where permitted

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit fc5a89f75d2aad3e566e030675ac420aee49729c ]

The early KASLR init code runs extremely early, and anything that could
be deferred until later should be. So let's defer the randomization of
the module region until much later - this also simplifies the
arithmetic, given that we no longer have to reason about the link time
vs load time placement of the core kernel explicitly. Also get rid of
the global status variable, and infer the status reported by the
diagnostic print from other KASLR related context.

While at it, get rid of the special case for KASAN without
KASAN_VMALLOC, which never occurs in practice.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-20-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/kaslr.c | 95 +++++++++++++++++----------------------
 1 file changed, 40 insertions(+), 55 deletions(-)

diff --git a/arch/arm64/kernel/kaslr.c b/arch/arm64/kernel/kaslr.c
index d5542666182f..3edee81d8ea7 100644
--- a/arch/arm64/kernel/kaslr.c
+++ b/arch/arm64/kernel/kaslr.c
@@ -20,14 +20,6 @@
 #include <asm/sections.h>
 #include <asm/setup.h>
 
-enum kaslr_status {
-	KASLR_ENABLED,
-	KASLR_DISABLED_CMDLINE,
-	KASLR_DISABLED_NO_SEED,
-	KASLR_DISABLED_FDT_REMAP,
-};
-
-static enum kaslr_status __initdata kaslr_status;
 u64 __ro_after_init module_alloc_base;
 u16 __initdata memstart_offset_seed;
 
@@ -63,15 +55,9 @@ struct arm64_ftr_override kaslr_feature_override __initdata;
 u64 __init kaslr_early_init(void)
 {
 	void *fdt;
-	u64 seed, offset, mask, module_range;
+	u64 seed, offset, mask;
 	unsigned long raw;
 
-	/*
-	 * Set a reasonable default for module_alloc_base in case
-	 * we end up running with module randomization disabled.
-	 */
-	module_alloc_base = (u64)_etext - MODULES_VSIZE;
-
 	/*
 	 * Try to map the FDT early. If this fails, we simply bail,
 	 * and proceed with KASLR disabled. We will make another
@@ -79,7 +65,6 @@ u64 __init kaslr_early_init(void)
 	 */
 	fdt = get_early_fdt_ptr();
 	if (!fdt) {
-		kaslr_status = KASLR_DISABLED_FDT_REMAP;
 		return 0;
 	}
 
@@ -93,7 +78,6 @@ u64 __init kaslr_early_init(void)
 	 * return 0 if that is the case.
 	 */
 	if (kaslr_feature_override.val & kaslr_feature_override.mask & 0xf) {
-		kaslr_status = KASLR_DISABLED_CMDLINE;
 		return 0;
 	}
 
@@ -106,7 +90,6 @@ u64 __init kaslr_early_init(void)
 		seed ^= raw;
 
 	if (!seed) {
-		kaslr_status = KASLR_DISABLED_NO_SEED;
 		return 0;
 	}
 
@@ -126,19 +109,43 @@ u64 __init kaslr_early_init(void)
 	/* use the top 16 bits to randomize the linear region */
 	memstart_offset_seed = seed >> 48;
 
-	if (!IS_ENABLED(CONFIG_KASAN_VMALLOC) &&
-	    (IS_ENABLED(CONFIG_KASAN_GENERIC) ||
-	     IS_ENABLED(CONFIG_KASAN_SW_TAGS)))
-		/*
-		 * KASAN without KASAN_VMALLOC does not expect the module region
-		 * to intersect the vmalloc region, since shadow memory is
-		 * allocated for each module at load time, whereas the vmalloc
-		 * region is shadowed by KASAN zero pages. So keep modules
-		 * out of the vmalloc region if KASAN is enabled without
-		 * KASAN_VMALLOC, and put the kernel well within 4 GB of the
-		 * module region.
-		 */
-		return offset % SZ_2G;
+	return offset;
+}
+
+static int __init kaslr_init(void)
+{
+	u64 module_range;
+	u32 seed;
+
+	/*
+	 * Set a reasonable default for module_alloc_base in case
+	 * we end up running with module randomization disabled.
+	 */
+	module_alloc_base = (u64)_etext - MODULES_VSIZE;
+
+	if (kaslr_feature_override.val & kaslr_feature_override.mask & 0xf) {
+		pr_info("KASLR disabled on command line\n");
+		return 0;
+	}
+
+	if (!kaslr_offset()) {
+		pr_warn("KASLR disabled due to lack of seed\n");
+		return 0;
+	}
+
+	pr_info("KASLR enabled\n");
+
+	/*
+	 * KASAN without KASAN_VMALLOC does not expect the module region to
+	 * intersect the vmalloc region, since shadow memory is allocated for
+	 * each module at load time, whereas the vmalloc region will already be
+	 * shadowed by KASAN zero pages.
+	 */
+	BUILD_BUG_ON((IS_ENABLED(CONFIG_KASAN_GENERIC) ||
+	              IS_ENABLED(CONFIG_KASAN_SW_TAGS)) &&
+		     !IS_ENABLED(CONFIG_KASAN_VMALLOC));
+
+	seed = get_random_u32();
 
 	if (IS_ENABLED(CONFIG_RANDOMIZE_MODULE_REGION_FULL)) {
 		/*
@@ -150,8 +157,7 @@ u64 __init kaslr_early_init(void)
 		 * resolved normally.)
 		 */
 		module_range = SZ_2G - (u64)(_end - _stext);
-		module_alloc_base = max((u64)_end + offset - SZ_2G,
-					(u64)MODULES_VADDR);
+		module_alloc_base = max((u64)_end - SZ_2G, (u64)MODULES_VADDR);
 	} else {
 		/*
 		 * Randomize the module region by setting module_alloc_base to
@@ -163,33 +169,12 @@ u64 __init kaslr_early_init(void)
 		 * when ARM64_MODULE_PLTS is enabled.
 		 */
 		module_range = MODULES_VSIZE - (u64)(_etext - _stext);
-		module_alloc_base = (u64)_etext + offset - MODULES_VSIZE;
 	}
 
 	/* use the lower 21 bits to randomize the base of the module region */
 	module_alloc_base += (module_range * (seed & ((1 << 21) - 1))) >> 21;
 	module_alloc_base &= PAGE_MASK;
 
-	return offset;
-}
-
-static int __init kaslr_init(void)
-{
-	switch (kaslr_status) {
-	case KASLR_ENABLED:
-		pr_info("KASLR enabled\n");
-		break;
-	case KASLR_DISABLED_CMDLINE:
-		pr_info("KASLR disabled on command line\n");
-		break;
-	case KASLR_DISABLED_NO_SEED:
-		pr_warn("KASLR disabled due to lack of seed\n");
-		break;
-	case KASLR_DISABLED_FDT_REMAP:
-		pr_warn("KASLR disabled due to FDT remapping failure\n");
-		break;
-	}
-
 	return 0;
 }
-core_initcall(kaslr_init)
+subsys_initcall(kaslr_init)
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 06/45] arm64: Do not forget syscall when starting a new thread.

[Sasha Levin]

From: Francis Laniel <flaniel@linux.microsoft.com>

[ Upstream commit de6921856f99c11d3986c6702d851e1328d4f7f6 ]

Enable tracing of the execve*() system calls with the
syscalls:sys_exit_execve tracepoint by removing the call to
forget_syscall() when starting a new thread and preserving the value of
regs->syscallno across exec.

Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Link: https://lore.kernel.org/r/20220608162447.666494-2-flaniel@linux.microsoft.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/processor.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index 5e73d7f7d1e7..d9bf3d12a2b8 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -204,8 +204,9 @@ void tls_preserve_current_state(void);
 
 static inline void start_thread_common(struct pt_regs *regs, unsigned long pc)
 {
+	s32 previous_syscall = regs->syscallno;
 	memset(regs, 0, sizeof(*regs));
-	forget_syscall(regs);
+	regs->syscallno = previous_syscall;
 	regs->pc = pc;
 
 	if (system_uses_irq_prio_masking())
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 07/45] arm64: fix oops in concurrently setting insn_emulation sysctls

[Sasha Levin]

From: haibinzhang (张海斌) <haibinzhang@tencent.com>

[ Upstream commit af483947d472eccb79e42059276c4deed76f99a6 ]

emulation_proc_handler() changes table->data for proc_dointvec_minmax
and can generate the following Oops if called concurrently with itself:

 | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
 | Internal error: Oops: 96000006 [#1] SMP
 | Call trace:
 | update_insn_emulation_mode+0xc0/0x148
 | emulation_proc_handler+0x64/0xb8
 | proc_sys_call_handler+0x9c/0xf8
 | proc_sys_write+0x18/0x20
 | __vfs_write+0x20/0x48
 | vfs_write+0xe4/0x1d0
 | ksys_write+0x70/0xf8
 | __arm64_sys_write+0x20/0x28
 | el0_svc_common.constprop.0+0x7c/0x1c0
 | el0_svc_handler+0x2c/0xa0
 | el0_svc+0x8/0x200

To fix this issue, keep the table->data as &insn->current_mode and
use container_of() to retrieve the insn pointer. Another mutex is
used to protect against the current_mode update but not for retrieving
insn_emulation as table->data is no longer changing.

Co-developed-by: hewenliang <hewenliang4@huawei.com>
Signed-off-by: hewenliang <hewenliang4@huawei.com>
Signed-off-by: Haibin Zhang <haibinzhang@tencent.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220128090324.2727688-1-hewenliang4@huawei.com
Link: https://lore.kernel.org/r/9A004C03-250B-46C5-BF39-782D7551B00E@tencent.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/armv8_deprecated.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c
index 0e86e8b9cedd..c5da9d1e954a 100644
--- a/arch/arm64/kernel/armv8_deprecated.c
+++ b/arch/arm64/kernel/armv8_deprecated.c
@@ -59,6 +59,7 @@ struct insn_emulation {
 static LIST_HEAD(insn_emulation);
 static int nr_insn_emulated __initdata;
 static DEFINE_RAW_SPINLOCK(insn_emulation_lock);
+static DEFINE_MUTEX(insn_emulation_mutex);
 
 static void register_emulation_hooks(struct insn_emulation_ops *ops)
 {
@@ -207,10 +208,10 @@ static int emulation_proc_handler(struct ctl_table *table, int write,
 				  loff_t *ppos)
 {
 	int ret = 0;
-	struct insn_emulation *insn = (struct insn_emulation *) table->data;
+	struct insn_emulation *insn = container_of(table->data, struct insn_emulation, current_mode);
 	enum insn_emulation_mode prev_mode = insn->current_mode;
 
-	table->data = &insn->current_mode;
+	mutex_lock(&insn_emulation_mutex);
 	ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
 
 	if (ret || !write || prev_mode == insn->current_mode)
@@ -223,7 +224,7 @@ static int emulation_proc_handler(struct ctl_table *table, int write,
 		update_insn_emulation_mode(insn, INSN_UNDEF);
 	}
 ret:
-	table->data = insn;
+	mutex_unlock(&insn_emulation_mutex);
 	return ret;
 }
 
@@ -247,7 +248,7 @@ static void __init register_insn_emulation_sysctl(void)
 		sysctl->maxlen = sizeof(int);
 
 		sysctl->procname = insn->ops->name;
-		sysctl->data = insn;
+		sysctl->data = &insn->current_mode;
 		sysctl->extra1 = &insn->min;
 		sysctl->extra2 = &insn->max;
 		sysctl->proc_handler = emulation_proc_handler;
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 09/45] arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags"

[Sasha Levin]

From: Catalin Marinas <catalin.marinas@arm.com>

[ Upstream commit 20794545c14692094a882d2221c251c4573e6adf ]

This reverts commit e5b8d9218951e59df986f627ec93569a0d22149b.

Pages mapped in user-space with PROT_MTE have the allocation tags either
zeroed or copied/restored to some user values. In order for the kernel
to access such pages via page_address(), resetting the tag in
page->flags was necessary. This tag resetting was deferred to
set_pte_at() -> mte_sync_page_tags() but it can race with another CPU
reading the flags (via page_to_virt()):

P0 (mte_sync_page_tags):	P1 (memcpy from virt_to_page):
				  Rflags!=0xff
  Wflags=0xff
  DMB (doesn't help)
  Wtags=0
				  Rtags=0   // fault

Since now the post_alloc_hook() function resets the page->flags tag when
unpoisoning is skipped for user pages (including the __GFP_ZEROTAGS
case), revert the arm64 commit calling page_kasan_tag_reset().

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Peter Collingbourne <pcc@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20220610152141.2148929-5-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/hibernate.c | 5 -----
 arch/arm64/kernel/mte.c       | 9 ---------
 arch/arm64/mm/copypage.c      | 9 ---------
 arch/arm64/mm/mteswap.c       | 9 ---------
 4 files changed, 32 deletions(-)

diff --git a/arch/arm64/kernel/hibernate.c b/arch/arm64/kernel/hibernate.c
index 46a0b4d6e251..db93ce2b0113 100644
--- a/arch/arm64/kernel/hibernate.c
+++ b/arch/arm64/kernel/hibernate.c
@@ -326,11 +326,6 @@ static void swsusp_mte_restore_tags(void)
 		unsigned long pfn = xa_state.xa_index;
 		struct page *page = pfn_to_online_page(pfn);
 
-		/*
-		 * It is not required to invoke page_kasan_tag_reset(page)
-		 * at this point since the tags stored in page->flags are
-		 * already restored.
-		 */
 		mte_restore_page_tags(page_address(page), tags);
 
 		mte_free_tag_storage(tags);
diff --git a/arch/arm64/kernel/mte.c b/arch/arm64/kernel/mte.c
index 7c1c82c8115c..10207e3e5ae2 100644
--- a/arch/arm64/kernel/mte.c
+++ b/arch/arm64/kernel/mte.c
@@ -44,15 +44,6 @@ static void mte_sync_page_tags(struct page *page, pte_t old_pte,
 	if (!pte_is_tagged)
 		return;
 
-	page_kasan_tag_reset(page);
-	/*
-	 * We need smp_wmb() in between setting the flags and clearing the
-	 * tags because if another thread reads page->flags and builds a
-	 * tagged address out of it, there is an actual dependency to the
-	 * memory access, but on the current thread we do not guarantee that
-	 * the new page->flags are visible before the tags were updated.
-	 */
-	smp_wmb();
 	mte_clear_page_tags(page_address(page));
 }
 
diff --git a/arch/arm64/mm/copypage.c b/arch/arm64/mm/copypage.c
index 0dea80bf6de4..24913271e898 100644
--- a/arch/arm64/mm/copypage.c
+++ b/arch/arm64/mm/copypage.c
@@ -23,15 +23,6 @@ void copy_highpage(struct page *to, struct page *from)
 
 	if (system_supports_mte() && test_bit(PG_mte_tagged, &from->flags)) {
 		set_bit(PG_mte_tagged, &to->flags);
-		page_kasan_tag_reset(to);
-		/*
-		 * We need smp_wmb() in between setting the flags and clearing the
-		 * tags because if another thread reads page->flags and builds a
-		 * tagged address out of it, there is an actual dependency to the
-		 * memory access, but on the current thread we do not guarantee that
-		 * the new page->flags are visible before the tags were updated.
-		 */
-		smp_wmb();
 		mte_copy_page_tags(kto, kfrom);
 	}
 }
diff --git a/arch/arm64/mm/mteswap.c b/arch/arm64/mm/mteswap.c
index 7c4ef56265ee..c52c1847079c 100644
--- a/arch/arm64/mm/mteswap.c
+++ b/arch/arm64/mm/mteswap.c
@@ -53,15 +53,6 @@ bool mte_restore_tags(swp_entry_t entry, struct page *page)
 	if (!tags)
 		return false;
 
-	page_kasan_tag_reset(page);
-	/*
-	 * We need smp_wmb() in between setting the flags and clearing the
-	 * tags because if another thread reads page->flags and builds a
-	 * tagged address out of it, there is an actual dependency to the
-	 * memory access, but on the current thread we do not guarantee that
-	 * the new page->flags are visible before the tags were updated.
-	 */
-	smp_wmb();
 	mte_restore_page_tags(page_address(page), tags);
 
 	return true;
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 18/45] ARM: dts: imx6ul: add missing properties for sram

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 5655699cf5cff9f4c4ee703792156bdd05d1addf ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check
warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6ul.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index afeec01f6522..1d435a46fc5c 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -149,6 +149,9 @@ soc {
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
 		intc: interrupt-controller@a01000 {
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 19/45] ARM: dts: imx6ul: change operating-points to uint32-matrix

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit edb67843983bbdf61b4c8c3c50618003d38bb4ae ]

operating-points is a uint32-matrix as per opp-v1.yaml. Change it
accordingly. While at it, change fsl,soc-operating-points as well,
although there is no bindings file (yet). But they should have the same
format. Fixes the dt_binding_check warning:
cpu@0: operating-points:0: [696000, 1275000, 528000, 1175000, 396000,
1025000, 198000, 950000] is too long
cpu@0: operating-points:0: Additional items are not allowed (528000,
1175000, 396000, 1025000, 198000, 950000 were unexpected)

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6ul.dtsi | 22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 1d435a46fc5c..2fcbd9d91521 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -64,20 +64,18 @@ cpu0: cpu@0 {
 			clock-frequency = <696000000>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			#cooling-cells = <2>;
-			operating-points = <
+			operating-points =
 				/* kHz	uV */
-				696000	1275000
-				528000	1175000
-				396000	1025000
-				198000	950000
-			>;
-			fsl,soc-operating-points = <
+				<696000	1275000>,
+				<528000	1175000>,
+				<396000	1025000>,
+				<198000	950000>;
+			fsl,soc-operating-points =
 				/* KHz	uV */
-				696000	1275000
-				528000	1175000
-				396000	1175000
-				198000	1175000
-			>;
+				<696000	1275000>,
+				<528000	1175000>,
+				<396000	1175000>,
+				<198000	1175000>;
 			clocks = <&clks IMX6UL_CLK_ARM>,
 				 <&clks IMX6UL_CLK_PLL2_BUS>,
 				 <&clks IMX6UL_CLK_PLL2_PFD2>,
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 20/45] ARM: dts: imx6ul: fix keypad compatible

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 7d15e0c9a515494af2e3199741cdac7002928a0e ]

According to binding, the compatible shall only contain imx6ul and imx21
compatibles. Fixes the dt_binding_check warning:
keypad@20b8000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6ul-kpp', 'fsl,imx6q-kpp', 'fsl,imx21-kpp'] is too long
Additional items are not allowed ('fsl,imx6q-kpp', 'fsl,imx21-kpp' were
unexpected)
Additional items are not allowed ('fsl,imx21-kpp' was unexpected)
'fsl,imx21-kpp' was expected

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6ul.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 2fcbd9d91521..df8b4ad62418 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -544,7 +544,7 @@ fec2: ethernet@20b4000 {
 			};
 
 			kpp: keypad@20b8000 {
-				compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
+				compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
 				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_KPP>;
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 21/45] ARM: dts: imx6ul: fix csi node compatible

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit e0aca931a2c7c29c88ebf37f9c3cd045e083483d ]

"fsl,imx6ul-csi" was never listed as compatible to "fsl,imx7-csi", neither
in yaml bindings, nor previous txt binding. Remove the imx7 part. Fixes
the dt schema check warning:
csi@21c4000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6ul-csi', 'fsl,imx7-csi'] is too long
Additional items are not allowed ('fsl,imx7-csi' was unexpected)
'fsl,imx8mm-csi' was expected

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6ul.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index df8b4ad62418..367657a9a99f 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -999,7 +999,7 @@ cpu_speed_grade: speed-grade@10 {
 			};
 
 			csi: csi@21c4000 {
-				compatible = "fsl,imx6ul-csi", "fsl,imx7-csi";
+				compatible = "fsl,imx6ul-csi";
 				reg = <0x021c4000 0x4000>;
 				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_CSI>;
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 22/45] ARM: dts: imx6ul: fix lcdif node compatible

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 1a884d17ca324531634cce82e9f64c0302bdf7de ]

In yaml binding "fsl,imx6ul-lcdif" is listed as compatible to imx6sx-lcdif,
but not imx28-lcdif. Change the list accordingly. Fixes the
dt_binding_check warning:
lcdif@21c8000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6ul-lcdif', 'fsl,imx28-lcdif'] is too long
Additional items are not allowed ('fsl,imx28-lcdif' was unexpected)
'fsl,imx6ul-lcdif' is not one of ['fsl,imx23-lcdif', 'fsl,imx28-lcdif',
'fsl,imx6sx-lcdif']
'fsl,imx6sx-lcdif' was expected

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6ul.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 367657a9a99f..bc6548058d8c 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -1008,7 +1008,7 @@ csi: csi@21c4000 {
 			};
 
 			lcdif: lcdif@21c8000 {
-				compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
+				compatible = "fsl,imx6ul-lcdif", "fsl,imx6sx-lcdif";
 				reg = <0x021c8000 0x4000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 23/45] ARM: dts: imx6ul: fix qspi node compatible

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 0c6cf86e1ab433b2d421880fdd9c6e954f404948 ]

imx6ul is not compatible to imx6sx, both have different erratas.
Fixes the dt_binding_check warning:
spi@21e0000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6ul-qspi', 'fsl,imx6sx-qspi'] is too long
Additional items are not allowed ('fsl,imx6sx-qspi' was unexpected)
'fsl,imx6ul-qspi' is not one of ['fsl,ls1043a-qspi']
'fsl,imx6ul-qspi' is not one of ['fsl,imx8mq-qspi']
'fsl,ls1021a-qspi' was expected
'fsl,imx7d-qspi' was expected

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6ul.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index bc6548058d8c..eca8bf89ab88 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -1029,7 +1029,7 @@ pxp: pxp@21cc000 {
 			qspi: spi@21e0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
+				compatible = "fsl,imx6ul-qspi";
 				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
 				reg-names = "QuadSPI", "QuadSPI-memory";
 				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 24/45] ARM: dts: BCM5301X: Add DT for Meraki MR26

[Sasha Levin]

From: Christian Lamparter <chunkeey@gmail.com>

[ Upstream commit 935327a73553001f8d81375c76985d05f604507f ]

Meraki MR26 is an EOL wireless access point featuring a
PoE ethernet port and two dual-band 3x3 MIMO 802.11n
radios and 1x1 dual-band WIFI dedicated to scanning.

Thank you Amir for the unit and PSU.

Hardware info:
SOC   : Broadcom BCM53015A1KFEBG (dual-core Cortex-A9 CPU at 800 MHz)
RAM   : SK Hynix Inc. H5TQ1G63EFR, 1 GBit DDR3 SDRAM = 128 MiB
NAND  : Spansion S34ML01G100TF100, 1 GBit SLC NAND Flash = 128 MiB
ETH   : 1 GBit Ethernet Port - PoE (TPS23754 PoE Interface)
WIFI0 : Broadcom BCM43431KMLG, BCM43431 802.11 abgn (3x3:3)
WIFI1 : Broadcom BCM43431KMLG, BCM43431 802.11 abgn (3x3:3)
WIFI2 : Broadcom BCM43428 "Air Marshal" 802.11 abgn (1x1:1)
BUTTON: One reset key behind a small hole next to the Ethernet Port
LEDS  : One amber (fault), one white (indicator) LED, separate RGB-LED
MISC  : Atmel AT24C64 8KiB EEPROM i2c
      : Ti INA219 26V, 12-bit, i2c output current/voltage/power monitor

SERIAL:
      WARNING: The serial port needs a TTL/RS-232 3V3 level converter!
      The Serial setting is 115200-8-N-1. The board has a populated
      right angle 1x4 0.1" pinheader.
      The pinout is: VCC (next to J3, has the pin 1 indicator), RX, TX, GND.

Odd stuff:

- uboot does not support lzma compression, but gzip'd uImage/DTB work.
- uboot claims to support FIT, but fails to pass the DTB to the kernel.
  Appending the dtb after the kernel image works.
- RGB-controller is supported through an external userspace program.
- The ubi partition contains a "board-config" volume. It stores the
  MAC Address (0x66 in binary) and Serial No. (0x7c alpha-numerical).
- SoC's temperature sensor always reports that it is on fire.
  This causes the system to immediately shutdown! Looking at reported
  "418 degree Celsius" suggests that this sensor is not working.

WIFI:
b43 is able to initialize all three WIFIs @ 802.11bg.
| b43-phy0: Broadcom 43431 WLAN found (core revision 29)
| bcma-pci-bridge 0000:01:00.0: bus1: Switched to core: 0x812
| b43-phy0: Found PHY: Analog 9, Type 7 (HT), Revision 1
| b43-phy0: Found Radio: Manuf 0x17F, ID 0x2059, Revision 0, Version 1
| b43-phy0 warning: 5 GHz band is unsupported on this PHY
| b43-phy1: Broadcom 43431 WLAN found (core revision 29)
| bcma-pci-bridge 0001:01:00.0: bus2: Switched to core: 0x812
| b43-phy1: Found PHY: Analog 9, Type 7 (HT), Revision 1
| b43-phy1: Found Radio: Manuf 0x17F, ID 0x2059, Revision 0, Version 1
| b43-phy1 warning: 5 GHz band is unsupported on this PHY
| b43-phy2: Broadcom 43228 WLAN found (core revision 30)
| bcma-pci-bridge 0002:01:00.0: bus3: Switched to core: 0x812
| b43-phy2: Found PHY: Analog 9, Type 4 (N), Revision 16
| b43-phy2: Found Radio: Manuf 0x17F, ID 0x2057, Revision 9, Version 1
| Broadcom 43xx driver loaded [ Features: NL ]

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/Makefile                 |   1 +
 arch/arm/boot/dts/bcm53015-meraki-mr26.dts | 166 +++++++++++++++++++++
 2 files changed, 167 insertions(+)
 create mode 100644 arch/arm/boot/dts/bcm53015-meraki-mr26.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 27ca1ca6e827..7a72fc636a7a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -127,6 +127,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm47094-luxul-xwr-3150-v1.dtb \
 	bcm47094-netgear-r8500.dtb \
 	bcm47094-phicomm-k3.dtb \
+	bcm53015-meraki-mr26.dtb \
 	bcm53016-meraki-mr32.dtb \
 	bcm94708.dtb \
 	bcm94709.dtb \
diff --git a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
new file mode 100644
index 000000000000..14f58033efeb
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Meraki MR26 / Codename: Venom
+ *
+ * Copyright (C) 2022 Christian Lamparter <chunkeey@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "meraki,mr26", "brcm,bcm53015", "brcm,bcm4708";
+	model = "Meraki MR26";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		key-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	clock-frequency = <50000000>;
+	/delete-property/ clocks;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "disabled";
+};
+&gmac2 {
+	status = "disabled";
+};
+&gmac3 {
+	status = "disabled";
+};
+
+&nandcs {
+	nand-ecc-algo = "hw";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x200000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u-boot-env";
+			reg = <0x200000 0x200000>;
+			/* empty */
+		};
+
+		partition@400000 {
+			label = "u-boot-backup";
+			reg = <0x400000 0x200000>;
+			/* empty */
+		};
+
+		partition@600000 {
+			label = "u-boot-env-backup";
+			reg = <0x600000 0x200000>;
+			/* empty */
+		};
+
+		partition@800000 {
+			label = "ubi";
+			reg = <0x800000 0x7780000>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+
+			fixed-link {
+				speed = <1000>;
+				duplex-full;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2c>;
+
+	clock-frequency = <100000>;
+
+	ina219@40 {
+		compatible = "ti,ina219"; /* PoE power */
+		reg = <0x40>;
+		shunt-resistor = <60000>; /* = 60 mOhms */
+	};
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <32>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* it's empty */
+	};
+};
+
+&thermal {
+	status = "disabled";
+	/* does not work, reads 418 degree Celsius */
+};
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 25/45] ARM: dts: ux500: Fix Codina accelerometer mounting matrix

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit 0b2152e428ab91533a02888ff24e52e788dc4637 ]

This was fixed wrong so fix it again. Now verified by using
iio-sensor-proxy monitor-sensor test program.

Link: https://lore.kernel.org/r/20220611204249.472250-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-ux500-samsung-codina.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
index 952606e607ed..ce62ba877da1 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
@@ -544,8 +544,8 @@ lisd3dh@19 {
 				reg = <0x19>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
 				vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
-				mount-matrix = "0", "-1", "0",
-					       "1", "0", "0",
+				mount-matrix = "0", "1", "0",
+					       "-1", "0", "0",
 					       "0", "0", "1";
 			};
 		};
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 26/45] ARM: dts: ux500: Fix Gavini accelerometer mounting matrix

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit e24c75f02a81d6ddac0072cbd7a03e799c19d558 ]

This was fixed wrong so fix it. Now verified by using
iio-sensor-proxy monitor-sensor test program.

Link: https://lore.kernel.org/r/20220611205138.491513-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-ux500-samsung-gavini.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
index fabc390ccb0c..6c9e812ef03f 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
@@ -502,8 +502,8 @@ i2c-gate {
 					accelerometer@18 {
 						compatible = "bosch,bma222e";
 						reg = <0x18>;
-						mount-matrix = "0", "1", "0",
-							       "-1", "0", "0",
+						mount-matrix = "0", "-1", "0",
+							       "1", "0", "0",
 							       "0", "0", "1";
 						vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
 						vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 28/45] ARM: OMAP2+: display: Fix refcount leak bug

[Sasha Levin]

From: Liang He <windhl@126.com>

[ Upstream commit 50b87a32a79bca6e275918a711fb8cc55e16d739 ]

In omapdss_init_fbdev(), of_find_node_by_name() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore.

Signed-off-by: Liang He <windhl@126.com>
Message-Id: <20220617145803.4050918-1-windhl@126.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap2/display.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 21413a9b7b6c..eb09a25e3b45 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -211,6 +211,7 @@ static int __init omapdss_init_fbdev(void)
 	node = of_find_node_by_name(NULL, "omap4_padconf_global");
 	if (node)
 		omap4_dsi_mux_syscon = syscon_node_to_regmap(node);
+	of_node_put(node);
 
 	return 0;
 }
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 29/45] ARM: OMAP2+: pdata-quirks: Fix refcount leak bug

[Sasha Levin]

From: Liang He <windhl@126.com>

[ Upstream commit 5cdbab96bab314c6f2f5e4e8b8a019181328bf5f ]

In pdata_quirks_init_clocks(), the loop contains
of_find_node_by_name() but without corresponding of_node_put().

Signed-off-by: Liang He <windhl@126.com>
Message-Id: <20220618020603.4055792-1-windhl@126.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap2/pdata-quirks.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 765809b214e7..bf50acd6b8a3 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -587,6 +587,8 @@ pdata_quirks_init_clocks(const struct of_device_id *omap_dt_match_table)
 
 		of_platform_populate(np, omap_dt_match_table,
 				     omap_auxdata_lookup, NULL);
+
+		of_node_put(np);
 	}
 }
 
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 36/45] arm64: dts: allwinner: a64: orangepi-win: Fix LED node name

[Sasha Levin]

From: Samuel Holland <samuel@sholland.org>

[ Upstream commit b8eb2df19fbf97aa1e950cf491232c2e3bef8357 ]

"status" does not match any pattern in the gpio-leds binding. Rename the
node to the preferred pattern. This fixes a `make dtbs_check` error.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702132816.46456-1-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index 097a5511523a..09eee653d5ca 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -40,7 +40,7 @@ hdmi_con_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "orangepi:green:status";
 			gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
 		};
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 37/45] ARM: shmobile: rcar-gen2: Increase refcount for new reference

[Sasha Levin]

From: Liang He <windhl@126.com>

[ Upstream commit 75a185fb92e58ccd3670258d8d3b826bd2fa6d29 ]

In rcar_gen2_regulator_quirk(), for_each_matching_node_and_match() will
automatically increase and decrease the refcount.  However, we should
call of_node_get() for the new reference created in 'quirk->np'.
Besides, we also should call of_node_put() before the 'quirk' being
freed.

Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220701121804.234223-1-windhl@126.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index 09ef73b99dd8..ba44cec5e59a 100644
--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -125,6 +125,7 @@ static int regulator_quirk_notify(struct notifier_block *nb,
 
 	list_for_each_entry_safe(pos, tmp, &quirk_list, list) {
 		list_del(&pos->list);
+		of_node_put(pos->np);
 		kfree(pos);
 	}
 
@@ -174,11 +175,12 @@ static int __init rcar_gen2_regulator_quirk(void)
 		memcpy(&quirk->i2c_msg, id->data, sizeof(quirk->i2c_msg));
 
 		quirk->id = id;
-		quirk->np = np;
+		quirk->np = of_node_get(np);
 		quirk->i2c_msg.addr = addr;
 
 		ret = of_irq_parse_one(np, 0, argsa);
 		if (ret) {	/* Skip invalid entry and continue */
+			of_node_put(np);
 			kfree(quirk);
 			continue;
 		}
@@ -225,6 +227,7 @@ static int __init rcar_gen2_regulator_quirk(void)
 err_mem:
 	list_for_each_entry_safe(pos, tmp, &quirk_list, list) {
 		list_del(&pos->list);
+		of_node_put(pos->np);
 		kfree(pos);
 	}
 
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel