[PATCH AUTOSEL 5.18 09/56] PCI: aardvark: Fix reporting Slot capabilities on emulated bridge

[PATCH AUTOSEL 5.18 09/56] PCI: aardvark: Fix reporting Slot capabilities on emulated bridge

[Sasha Levin]

From: Pali Rohár <pali@kernel.org>

[ Upstream commit bcdb6fd4f3e9ac1097698c8d8f56b70853b49873 ]

Slot capabilities are currently not reported because emulated bridge does
not report the PCI_EXP_FLAGS_SLOT flag.

Set PCI_EXP_FLAGS_SLOT to let the kernel know that PCI_EXP_SLT* registers
are supported.

Move setting of PCI_EXP_SLTCTL register from "dynamic" pcie_conf_read
function to static buffer as it is only statically filled the
PCI_EXP_SLTSTA_PDS flag and dynamic read callback is not needed for this
register.

Set Presence State Bit to 1 since there is no support for unplugging the
card and there is currently no platform able to detect presence of a card -
in such a case the bit needs to be set to 1.

Finally correctly set Physical Slot Number to 1 since there is only one
port and zero value is reserved for ports within the same silicon as Root
Port which is not our case for Aardvark HW.

Link: https://lore.kernel.org/r/20220524132827.8837-3-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pci-aardvark.c | 33 +++++++++++++++++++--------
 1 file changed, 24 insertions(+), 9 deletions(-)

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index ffec82c8a523..62db476a8651 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -8,6 +8,7 @@
  * Author: Hezi Shahmoon <hezi.shahmoon@marvell.com>
  */
 
+#include <linux/bitfield.h>
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
@@ -857,14 +858,11 @@ advk_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
 
 
 	switch (reg) {
-	case PCI_EXP_SLTCTL:
-		*value = PCI_EXP_SLTSTA_PDS << 16;
-		return PCI_BRIDGE_EMUL_HANDLED;
-
 	/*
-	 * PCI_EXP_RTCTL and PCI_EXP_RTSTA are also supported, but do not need
-	 * to be handled here, because their values are stored in emulated
-	 * config space buffer, and we read them from there when needed.
+	 * PCI_EXP_SLTCAP, PCI_EXP_SLTCTL, PCI_EXP_RTCTL and PCI_EXP_RTSTA are
+	 * also supported, but do not need to be handled here, because their
+	 * values are stored in emulated config space buffer, and we read them
+	 * from there when needed.
 	 */
 
 	case PCI_EXP_LNKCAP: {
@@ -977,8 +975,25 @@ static int advk_sw_pci_bridge_init(struct advk_pcie *pcie)
 	/* Support interrupt A for MSI feature */
 	bridge->conf.intpin = PCI_INTERRUPT_INTA;
 
-	/* Aardvark HW provides PCIe Capability structure in version 2 */
-	bridge->pcie_conf.cap = cpu_to_le16(2);
+	/*
+	 * Aardvark HW provides PCIe Capability structure in version 2 and
+	 * indicate slot support, which is emulated.
+	 */
+	bridge->pcie_conf.cap = cpu_to_le16(2 | PCI_EXP_FLAGS_SLOT);
+
+	/*
+	 * Set Presence Detect State bit permanently since there is no support
+	 * for unplugging the card nor detecting whether it is plugged. (If a
+	 * platform exists in the future that supports it, via a GPIO for
+	 * example, it should be implemented via this bit.)
+	 *
+	 * Set physical slot number to 1 since there is only one port and zero
+	 * value is reserved for ports within the same silicon as Root Port
+	 * which is not our case.
+	 */
+	bridge->pcie_conf.slotcap = cpu_to_le32(FIELD_PREP(PCI_EXP_SLTCAP_PSN,
+							   1));
+	bridge->pcie_conf.slotsta = cpu_to_le16(PCI_EXP_SLTSTA_PDS);
 
 	/* Indicates supports for Completion Retry Status */
 	bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS);
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.18 13/56] drm/meson: Fix overflow implicit truncation warnings

[Sasha Levin]

From: Sai Prakash Ranjan <quic_saipraka@quicinc.com>

[ Upstream commit 98692f52c588225034cbff458622c2c06dfcb544 ]

Fix -Woverflow warnings for drm/meson driver which is a result
of moving arm64 custom MMIO accessor macros to asm-generic function
implementations giving a bonus type-checking now and uncovering these
overflow warnings.

drivers/gpu/drm/meson/meson_viu.c: In function ‘meson_viu_init’:
drivers/gpu/drm/meson/meson_registers.h:1826:48: error: large integer implicitly truncated to unsigned type [-Werror=overflow]
 #define  VIU_OSD_BLEND_REORDER(dest, src)      ((src) << (dest * 4))
                                                ^
drivers/gpu/drm/meson/meson_viu.c:472:18: note: in expansion of macro ‘VIU_OSD_BLEND_REORDER’
   writel_relaxed(VIU_OSD_BLEND_REORDER(0, 1) |
                  ^~~~~~~~~~~~~~~~~~~~~

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/meson/meson_viu.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_viu.c b/drivers/gpu/drm/meson/meson_viu.c
index 259f3e6bec90..bb7e109534de 100644
--- a/drivers/gpu/drm/meson/meson_viu.c
+++ b/drivers/gpu/drm/meson/meson_viu.c
@@ -469,17 +469,17 @@ void meson_viu_init(struct meson_drm *priv)
 			priv->io_base + _REG(VD2_IF0_LUMA_FIFO_SIZE));
 
 	if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) {
-		writel_relaxed(VIU_OSD_BLEND_REORDER(0, 1) |
-			       VIU_OSD_BLEND_REORDER(1, 0) |
-			       VIU_OSD_BLEND_REORDER(2, 0) |
-			       VIU_OSD_BLEND_REORDER(3, 0) |
-			       VIU_OSD_BLEND_DIN_EN(1) |
-			       VIU_OSD_BLEND1_DIN3_BYPASS_TO_DOUT1 |
-			       VIU_OSD_BLEND1_DOUT_BYPASS_TO_BLEND2 |
-			       VIU_OSD_BLEND_DIN0_BYPASS_TO_DOUT0 |
-			       VIU_OSD_BLEND_BLEN2_PREMULT_EN(1) |
-			       VIU_OSD_BLEND_HOLD_LINES(4),
-			       priv->io_base + _REG(VIU_OSD_BLEND_CTRL));
+		u32 val = (u32)VIU_OSD_BLEND_REORDER(0, 1) |
+			  (u32)VIU_OSD_BLEND_REORDER(1, 0) |
+			  (u32)VIU_OSD_BLEND_REORDER(2, 0) |
+			  (u32)VIU_OSD_BLEND_REORDER(3, 0) |
+			  (u32)VIU_OSD_BLEND_DIN_EN(1) |
+			  (u32)VIU_OSD_BLEND1_DIN3_BYPASS_TO_DOUT1 |
+			  (u32)VIU_OSD_BLEND1_DOUT_BYPASS_TO_BLEND2 |
+			  (u32)VIU_OSD_BLEND_DIN0_BYPASS_TO_DOUT0 |
+			  (u32)VIU_OSD_BLEND_BLEN2_PREMULT_EN(1) |
+			  (u32)VIU_OSD_BLEND_HOLD_LINES(4);
+		writel_relaxed(val, priv->io_base + _REG(VIU_OSD_BLEND_CTRL));
 
 		writel_relaxed(OSD_BLEND_PATH_SEL_ENABLE,
 			       priv->io_base + _REG(OSD1_BLEND_SRC_CTRL));
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.18 15/56] scsi: ufs: ufs-mediatek: Fix the timing of configuring device regulators

[Sasha Levin]

From: Po-Wen Kao <powen.kao@mediatek.com>

[ Upstream commit 3fd23b8dfb54d9b74eba6dfdd3225db3ac116785 ]

Currently the LPM configurations of device regulators may not work since
VCC is not disabled yet while ufs_mtk_vreg_set_lpm() is executed.

Fix this by changing the timing of invoking ufs_mtk_vreg_set_lpm().

Link: https://lore.kernel.org/r/20220616053725.5681-5-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufs-mediatek.c | 58 ++++++++++++++++++++++++++++++---
 1 file changed, 53 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index 86a938075f30..266ceed34751 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -1033,7 +1033,6 @@ static int ufs_mtk_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
 		 * ufshcd_suspend() re-enabling regulators while vreg is still
 		 * in low-power mode.
 		 */
-		ufs_mtk_vreg_set_lpm(hba, true);
 		err = ufs_mtk_mphy_power_on(hba, false);
 		if (err)
 			goto fail;
@@ -1057,12 +1056,13 @@ static int ufs_mtk_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 {
 	int err;
 
+	if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL)
+		ufs_mtk_vreg_set_lpm(hba, false);
+
 	err = ufs_mtk_mphy_power_on(hba, true);
 	if (err)
 		goto fail;
 
-	ufs_mtk_vreg_set_lpm(hba, false);
-
 	if (ufshcd_is_link_hibern8(hba)) {
 		err = ufs_mtk_link_set_hpm(hba);
 		if (err)
@@ -1227,9 +1227,57 @@ static int ufs_mtk_remove(struct platform_device *pdev)
 	return 0;
 }
 
+int ufs_mtk_system_suspend(struct device *dev)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+	int ret;
+
+	ret = ufshcd_system_suspend(dev);
+	if (ret)
+		return ret;
+
+	ufs_mtk_vreg_set_lpm(hba, true);
+
+	return 0;
+}
+
+int ufs_mtk_system_resume(struct device *dev)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+
+	ufs_mtk_vreg_set_lpm(hba, false);
+
+	return ufshcd_system_resume(dev);
+}
+
+int ufs_mtk_runtime_suspend(struct device *dev)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ret = ufshcd_runtime_suspend(dev);
+	if (ret)
+		return ret;
+
+	ufs_mtk_vreg_set_lpm(hba, true);
+
+	return 0;
+}
+
+int ufs_mtk_runtime_resume(struct device *dev)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+
+	ufs_mtk_vreg_set_lpm(hba, false);
+
+	return ufshcd_runtime_resume(dev);
+}
+
 static const struct dev_pm_ops ufs_mtk_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(ufshcd_system_suspend, ufshcd_system_resume)
-	SET_RUNTIME_PM_OPS(ufshcd_runtime_suspend, ufshcd_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(ufs_mtk_system_suspend,
+				ufs_mtk_system_resume)
+	SET_RUNTIME_PM_OPS(ufs_mtk_runtime_suspend,
+			   ufs_mtk_runtime_resume, NULL)
 	.prepare	 = ufshcd_suspend_prepare,
 	.complete	 = ufshcd_resume_complete,
 };
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.18 28/56] coresight: etm4x: avoid build failure with unrolled loops

[Sasha Levin]

From: Nick Desaulniers <ndesaulniers@google.com>

[ Upstream commit 4d45bc82df667ad9e9cb8361830e54fc1264e993 ]

When the following configs are enabled:
* CORESIGHT
* CORESIGHT_SOURCE_ETM4X
* UBSAN
* UBSAN_TRAP

Clang fails assemble the kernel with the error:
<instantiation>:1:7: error: expected constant expression in '.inst' directive
.inst (0xd5200000|((((2) << 19) | ((1) << 16) | (((((((((((0x160 + (i * 4))))) >> 2))) >> 7) & 0x7)) << 12) | ((((((((((0x160 + (i * 4))))) >> 2))) & 0xf)) << 8) | (((((((((((0x160 + (i * 4))))) >> 2))) >> 4) & 0x7)) << 5)))|(.L__reg_num_x8))
      ^
drivers/hwtracing/coresight/coresight-etm4x-core.c:702:4: note: while in
macro instantiation
etm4x_relaxed_read32(csa, TRCCNTVRn(i));
^
drivers/hwtracing/coresight/coresight-etm4x.h:403:4: note: expanded from
macro 'etm4x_relaxed_read32'
read_etm4x_sysreg_offset((offset), false)))
^
drivers/hwtracing/coresight/coresight-etm4x.h:383:12: note: expanded
from macro 'read_etm4x_sysreg_offset'
__val = read_etm4x_sysreg_const_offset((offset));       \
        ^
drivers/hwtracing/coresight/coresight-etm4x.h:149:2: note: expanded from
macro 'read_etm4x_sysreg_const_offset'
READ_ETM4x_REG(ETM4x_OFFSET_TO_REG(offset))
^
drivers/hwtracing/coresight/coresight-etm4x.h:144:2: note: expanded from
macro 'READ_ETM4x_REG'
read_sysreg_s(ETM4x_REG_NUM_TO_SYSREG((reg)))
^
arch/arm64/include/asm/sysreg.h:1108:15: note: expanded from macro
'read_sysreg_s'
asm volatile(__mrs_s("%0", r) : "=r" (__val));                  \
             ^
arch/arm64/include/asm/sysreg.h:1074:2: note: expanded from macro '__mrs_s'
"       mrs_s " v ", " __stringify(r) "\n"                      \
 ^

Consider the definitions of TRCSSCSRn and TRCCNTVRn:
drivers/hwtracing/coresight/coresight-etm4x.h:56
 #define TRCCNTVRn(n)      (0x160 + (n * 4))
drivers/hwtracing/coresight/coresight-etm4x.h:81
 #define TRCSSCSRn(n)      (0x2A0 + (n * 4))

Where the macro parameter is expanded to i; a loop induction variable
from etm4_disable_hw.

When any compiler can determine that loops may be unrolled, then the
__builtin_constant_p check in read_etm4x_sysreg_offset() defined in
drivers/hwtracing/coresight/coresight-etm4x.h may evaluate to true. This
can lead to the expression `(0x160 + (i * 4))` being passed to
read_etm4x_sysreg_const_offset. Via the trace above, this is passed
through READ_ETM4x_REG, read_sysreg_s, and finally to __mrs_s where it
is string-ified and used directly in inline asm.

Regardless of which compiler or compiler options determine whether a
loop can or can't be unrolled, which determines whether
__builtin_constant_p evaluates to true when passed an expression using a
loop induction variable, it is NEVER safe to allow the preprocessor to
construct inline asm like:
  asm volatile (".inst (0x160 + (i * 4))" : "=r"(__val));
                                 ^ expected constant expression

Instead of read_etm4x_sysreg_offset() using __builtin_constant_p(), use
__is_constexpr from include/linux/const.h instead to ensure only
expressions that are valid integer constant expressions get passed
through to read_sysreg_s().

This is not a bug in clang; it's a potentially unsafe use of the macro
arguments in read_etm4x_sysreg_offset dependent on __builtin_constant_p.

Link: https://github.com/ClangBuiltLinux/linux/issues/1310
Reported-by: Arnd Bergmann <arnd@kernel.org>
Reported-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220708231520.3958391-1-ndesaulniers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/coresight/coresight-etm4x.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h
index 3c4d69b096ca..dcd52a64fc21 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.h
+++ b/drivers/hwtracing/coresight/coresight-etm4x.h
@@ -7,6 +7,7 @@
 #define _CORESIGHT_CORESIGHT_ETM_H
 
 #include <asm/local.h>
+#include <linux/const.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
 #include "coresight-priv.h"
@@ -417,7 +418,7 @@
 	({									\
 		u64 __val;							\
 										\
-		if (__builtin_constant_p((offset)))				\
+		if (__is_constexpr((offset)))					\
 			__val = read_etm4x_sysreg_const_offset((offset));	\
 		else								\
 			__val = etm4x_sysreg_read((offset), true, (_64bit));	\
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.18 34/56] scsi: ufs: ufs-exynos: Change ufs phy control sequence

[Sasha Levin]

From: Chanho Park <chanho61.park@samsung.com>

[ Upstream commit 3d73b200f9893d8f5ba5d105e8b69c8d16744fa2 ]

Since commit 1599069a62c6 ("phy: core: Warn when phy_power_on is called
before phy_init"), the following warning has been reported:

	phy_power_on was called before phy_init

To address this, we need to remove phy_power_on from exynos_ufs_phy_init()
and move it after phy_init. phy_power_off and phy_exit are also necessary
in exynos_ufs_remove().

Link: https://lore.kernel.org/r/20220706020255.151177-4-chanho61.park@samsung.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufs-exynos.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-exynos.c b/drivers/scsi/ufs/ufs-exynos.c
index 474a4a064a68..3ff9bd77f2c6 100644
--- a/drivers/scsi/ufs/ufs-exynos.c
+++ b/drivers/scsi/ufs/ufs-exynos.c
@@ -909,9 +909,13 @@ static int exynos_ufs_phy_init(struct exynos_ufs *ufs)
 	if (ret) {
 		dev_err(hba->dev, "%s: phy init failed, ret = %d\n",
 			__func__, ret);
-		goto out_exit_phy;
+		return ret;
 	}
 
+	ret = phy_power_on(generic_phy);
+	if (ret)
+		goto out_exit_phy;
+
 	return 0;
 
 out_exit_phy:
@@ -1173,10 +1177,6 @@ static int exynos_ufs_init(struct ufs_hba *hba)
 		goto out;
 	}
 
-	ret = phy_power_on(ufs->phy);
-	if (ret)
-		goto phy_off;
-
 	exynos_ufs_priv_init(hba, ufs);
 
 	if (ufs->drv_data->drv_init) {
@@ -1194,8 +1194,6 @@ static int exynos_ufs_init(struct ufs_hba *hba)
 	exynos_ufs_config_smu(ufs);
 	return 0;
 
-phy_off:
-	phy_power_off(ufs->phy);
 out:
 	hba->priv = NULL;
 	return ret;
@@ -1513,9 +1511,14 @@ static int exynos_ufs_probe(struct platform_device *pdev)
 static int exynos_ufs_remove(struct platform_device *pdev)
 {
 	struct ufs_hba *hba =  platform_get_drvdata(pdev);
+	struct exynos_ufs *ufs = ufshcd_get_variant(hba);
 
 	pm_runtime_get_sync(&(pdev)->dev);
 	ufshcd_remove(hba);
+
+	phy_power_off(ufs->phy);
+	phy_exit(ufs->phy);
+
 	return 0;
 }
 
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.18 46/56] ARM: 9202/1: kasan: support CONFIG_KASAN_VMALLOC

[Sasha Levin]

From: Lecopzer Chen <lecopzer.chen@mediatek.com>

[ Upstream commit 565cbaad83d83e288927b96565211109bc984007 ]

Simply make shadow of vmalloc area mapped on demand.

Since the virtual address of vmalloc for Arm is also between
MODULE_VADDR and 0x100000000 (ZONE_HIGHMEM), which means the shadow
address has already included between KASAN_SHADOW_START and
KASAN_SHADOW_END.
Thus we need to change nothing for memory map of Arm.

This can fix ARM_MODULE_PLTS with KASan, support KASan for higmem
and support CONFIG_VMAP_STACK with KASan.

Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/Kconfig         | 1 +
 arch/arm/mm/kasan_init.c | 6 +++++-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2e8091e2d8a8..f440cf59cea1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -75,6 +75,7 @@ config ARM
 	select HAVE_ARCH_KFENCE if MMU && !XIP_KERNEL
 	select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
 	select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL
+	select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
 	select HAVE_ARCH_PFN_VALID
 	select HAVE_ARCH_SECCOMP
diff --git a/arch/arm/mm/kasan_init.c b/arch/arm/mm/kasan_init.c
index 5ad0d6c56d56..29caee9c79ce 100644
--- a/arch/arm/mm/kasan_init.c
+++ b/arch/arm/mm/kasan_init.c
@@ -236,7 +236,11 @@ void __init kasan_init(void)
 
 	clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END);
 
-	kasan_populate_early_shadow(kasan_mem_to_shadow((void *)VMALLOC_START),
+	if (!IS_ENABLED(CONFIG_KASAN_VMALLOC))
+		kasan_populate_early_shadow(kasan_mem_to_shadow((void *)VMALLOC_START),
+					    kasan_mem_to_shadow((void *)VMALLOC_END));
+
+	kasan_populate_early_shadow(kasan_mem_to_shadow((void *)VMALLOC_END),
 				    kasan_mem_to_shadow((void *)-1UL) + 1);
 
 	for_each_mem_range(i, &pa_start, &pa_end) {
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.18 47/56] ARM: 9203/1: kconfig: fix MODULE_PLTS for KASAN with KASAN_VMALLOC

[Sasha Levin]

From: Lecopzer Chen <lecopzer.chen@mediatek.com>

[ Upstream commit 8fa7ea40bf56945c3ff5af00c0dca1fd9e26f129 ]

When we run out of module space address with ko insertion,
and with MODULE_PLTS, module would turn to try to find memory
from VMALLOC address space.

Unfortunately, with KASAN enabled, VMALLOC doesn't work without
KASAN_VMALLOC, thus select KASAN_VMALLOC by default.

8<--- cut here ---
 Unable to handle kernel paging request at virtual address bd300860
 [bd300860] *pgd=41cf1811, *pte=41cf26df, *ppte=41cf265f
 Internal error: Oops: 80f [#1] PREEMPT SMP ARM
 Modules linked in: hello(O+)
 CPU: 0 PID: 89 Comm: insmod Tainted: G           O      5.16.0-rc6+ #19
 Hardware name: Generic DT based system
 PC is at mmioset+0x30/0xa8
 LR is at 0x0
 pc : [<c077ed30>]    lr : [<00000000>]    psr: 20000013
 sp : c451fc18  ip : bd300860  fp : c451fc2c
 r10: f18042cc  r9 : f18042d0  r8 : 00000000
 r7 : 00000001  r6 : 00000003  r5 : 01312d00  r4 : f1804300
 r3 : 00000000  r2 : 00262560  r1 : 00000000  r0 : bd300860
 Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
 Control: 10c5387d  Table: 43e9406a  DAC: 00000051
 Register r0 information: non-paged memory
 Register r1 information: NULL pointer
 Register r2 information: non-paged memory
 Register r3 information: NULL pointer
 Register r4 information: 4887-page vmalloc region starting at 0xf1802000 allocated at load_module+0x14f4/0x32a8
 Register r5 information: non-paged memory
 Register r6 information: non-paged memory
 Register r7 information: non-paged memory
 Register r8 information: NULL pointer
 Register r9 information: 4887-page vmalloc region starting at 0xf1802000 allocated at load_module+0x14f4/0x32a8
 Register r10 information: 4887-page vmalloc region starting at 0xf1802000 allocated at load_module+0x14f4/0x32a8
 Register r11 information: non-slab/vmalloc memory
 Register r12 information: non-paged memory
 Process insmod (pid: 89, stack limit = 0xc451c000)
 Stack: (0xc451fc18 to 0xc4520000)
 fc00:                                                       f18041f0 c04803a4
 fc20: c451fc44 c451fc30 c048053c c0480358 f1804030 01312cff c451fc64 c451fc48
 fc40: c047f330 c0480500 f18040c0 c1b52ccc 00000001 c5be7700 c451fc74 c451fc68
 fc60: f1802098 c047f300 c451fcb4 c451fc78 c026106c f180208c c4880004 00000000
 fc80: c451fcb4 bf001000 c044ff48 c451fec0 f18040c0 00000000 c1b54cc4 00000000
 fca0: c451fdf0 f1804268 c451fe64 c451fcb8 c0264e88 c0260d48 ffff8000 00007fff
 fcc0: f18040c0 c025cd00 c451fd14 00000003 0157f008 f1804258 f180425c f1804174
 fce0: f1804154 f180424c f18041f0 f180414c f1804178 f18041c0 bf0025d4 188a3fa8
 fd00: 0000009e f1804170 f2b18000 c451ff10 c0d92e40 f180416c c451feec 00000001
 fd20: 00000000 c451fec8 c451fe20 c451fed0 f18040cc 00000000 f17ea000 c451fdc0
 fd40: 41b58ab3 c1387729 c0261c28 c047fb5c c451fe2c c451fd60 c0525308 c048033c
 fd60: 188a3fb4 c3ccb090 c451fe00 c3ccb080 00000000 00000000 00016920 00000000
 fd80: c02d0388 c047f55c c02d0388 00000000 c451fddc c451fda0 c02d0388 00000000
 fda0: 41b58ab3 c13a72d0 c0524ff0 c1705f48 c451fdfc c451fdc0 c02d0388 c047f55c
 fdc0: 00016920 00000000 00000003 c1bb2384 c451fdfc c3ccb080 c1bb2384 00000000
 fde0: 00000000 00000000 00000000 00000000 c451fe1c c451fe00 c04e9d70 c1705f48
 fe00: c1b54cc4 c1bbc71c c3ccb080 00000000 c3ccb080 00000000 00000003 c451fec0
 fe20: c451fe64 c451fe30 c0525918 c0524ffc c451feb0 c1705f48 00000000 c1b54cc4
 fe40: b78a3fd0 c451ff60 00000000 0157f008 00000003 c451fec0 c451ffa4 c451fe68
 fe60: c0265480 c0261c34 c451feb0 7fffffff 00000000 00000002 00000000 c4880000
 fe80: 41b58ab3 c138777b c02652cc c04803ec 000a0000 c451ff00 ffffff9c b6ac9f60
 fea0: c451fed4 c1705f48 c04a4a90 b78a3fdc f17ea000 ffffff9c b6ac9f60 c0100244
 fec0: f17ea21a f17ea300 f17ea000 00016920 f1800240 f18000ac f17fb7dc 01316000
 fee0: 013161b0 00002590 01316250 00000000 00000000 00000000 00002580 00000029
 ff00: 0000002a 00000013 00000000 0000000c 00000000 00000000 0157f004 c451ffb0
 ff20: c1719be0 aed6f410 c451ff74 c451ff38 c0c4103c c0c407d0 c451ff84 c451ff48
 ff40: 00000805 c02c8658 c1604230 c1719c30 00000805 0157f004 00000005 c451ffb0
 ff60: c1719be0 aed6f410 c451ffac c451ff78 c0122130 c1705f48 c451ffac 0157f008
 ff80: 00000006 0000005f 0000017b c0100244 c4880000 0000017b 00000000 c451ffa8
 ffa0: c0100060 c02652d8 0157f008 00000006 00000003 0157f008 00000000 b6ac9f60
 ffc0: 0157f008 00000006 0000005f 0000017b 00000000 00000000 aed85f74 00000000
 ffe0: b6ac9cd8 b6ac9cc8 00030200 aecf2d60 a0000010 00000003 00000000 00000000
 Backtrace:
 [<c048034c>] (kasan_poison) from [<c048053c>] (kasan_unpoison+0x48/0x5c)
 [<c04804f4>] (kasan_unpoison) from [<c047f330>] (__asan_register_globals+0x3c/0x64)
  r5:01312cff r4:f1804030
 [<c047f2f4>] (__asan_register_globals) from [<f1802098>] (_sub_I_65535_1+0x18/0xf80 [hello])
  r7:c5be7700 r6:00000001 r5:c1b52ccc r4:f18040c0
 [<f1802080>] (_sub_I_65535_1 [hello]) from [<c026106c>] (do_init_module+0x330/0x72c)
 [<c0260d3c>] (do_init_module) from [<c0264e88>] (load_module+0x3260/0x32a8)
  r10:f1804268 r9:c451fdf0 r8:00000000 r7:c1b54cc4 r6:00000000 r5:f18040c0
  r4:c451fec0
 [<c0261c28>] (load_module) from [<c0265480>] (sys_finit_module+0x1b4/0x1e8)
  r10:c451fec0 r9:00000003 r8:0157f008 r7:00000000 r6:c451ff60 r5:b78a3fd0
  r4:c1b54cc4
 [<c02652cc>] (sys_finit_module) from [<c0100060>] (ret_fast_syscall+0x0/0x1c)
 Exception stack(0xc451ffa8 to 0xc451fff0)
 ffa0:                   0157f008 00000006 00000003 0157f008 00000000 b6ac9f60
 ffc0: 0157f008 00000006 0000005f 0000017b 00000000 00000000 aed85f74 00000000
 ffe0: b6ac9cd8 b6ac9cc8 00030200 aecf2d60
  r10:0000017b r9:c4880000 r8:c0100244 r7:0000017b r6:0000005f r5:00000006
  r4:0157f008
 Code: e92d4100 e1a08001 e1a0e003 e2522040 (a8ac410a)
 ---[ end trace df6e12843197b6f5 ]---

Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f440cf59cea1..d9d60a3a5600 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1519,6 +1519,7 @@ config HW_PERF_EVENTS
 config ARM_MODULE_PLTS
 	bool "Use PLTs to allow module memory to spill over into vmalloc area"
 	depends on MODULES
+	select KASAN_VMALLOC if KASAN
 	default y
 	help
 	  Allocate PLTs when loading modules so that jumps and calls whose
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.18 49/56] phy: samsung: phy-exynos-pcie: sanitize init/power_on callbacks

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit f2812227bb07e2eaee74253f11cea1576945df31 ]

The exynos-pcie driver called phy_power_on() before phy_init() for some
historical reasons. However the generic PHY framework assumes that the
proper sequence is to call phy_init() first, then phy_power_on(). The
operations done by both functions should be considered as one action and as
such they are called by the exynos-pcie driver (without doing anything
between them). The initialization is just a sequence of register writes,
which cannot be altered without breaking the hardware operation.

To match the generic PHY framework requirement, simply move all register
writes to the phy_init()/phy_exit() and drop power_on()/power_off()
callbacks. This way the driver will also work with the old (incorrect)
PHY initialization call sequence.

Link: https://lore.kernel.org/r/20220628220409.26545-1-m.szyprowski@samsung.com
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/samsung/phy-exynos-pcie.c | 25 +++++++++----------------
 1 file changed, 9 insertions(+), 16 deletions(-)

diff --git a/drivers/phy/samsung/phy-exynos-pcie.c b/drivers/phy/samsung/phy-exynos-pcie.c
index 578cfe07d07a..53c9230c2907 100644
--- a/drivers/phy/samsung/phy-exynos-pcie.c
+++ b/drivers/phy/samsung/phy-exynos-pcie.c
@@ -51,6 +51,13 @@ static int exynos5433_pcie_phy_init(struct phy *phy)
 {
 	struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
 
+	regmap_update_bits(ep->pmureg, EXYNOS5433_PMU_PCIE_PHY_OFFSET,
+			   BIT(0), 1);
+	regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_GLOBAL_RESET,
+			   PCIE_APP_REQ_EXIT_L1_MODE, 0);
+	regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_L1SUB_CM_CON,
+			   PCIE_REFCLK_GATING_EN, 0);
+
 	regmap_update_bits(ep->fsysreg,	PCIE_EXYNOS5433_PHY_COMMON_RESET,
 			   PCIE_PHY_RESET, 1);
 	regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_MAC_RESET,
@@ -109,20 +116,7 @@ static int exynos5433_pcie_phy_init(struct phy *phy)
 	return 0;
 }
 
-static int exynos5433_pcie_phy_power_on(struct phy *phy)
-{
-	struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
-
-	regmap_update_bits(ep->pmureg, EXYNOS5433_PMU_PCIE_PHY_OFFSET,
-			   BIT(0), 1);
-	regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_GLOBAL_RESET,
-			   PCIE_APP_REQ_EXIT_L1_MODE, 0);
-	regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_L1SUB_CM_CON,
-			   PCIE_REFCLK_GATING_EN, 0);
-	return 0;
-}
-
-static int exynos5433_pcie_phy_power_off(struct phy *phy)
+static int exynos5433_pcie_phy_exit(struct phy *phy)
 {
 	struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
 
@@ -135,8 +129,7 @@ static int exynos5433_pcie_phy_power_off(struct phy *phy)
 
 static const struct phy_ops exynos5433_phy_ops = {
 	.init		= exynos5433_pcie_phy_init,
-	.power_on	= exynos5433_pcie_phy_power_on,
-	.power_off	= exynos5433_pcie_phy_power_off,
+	.exit		= exynos5433_pcie_phy_exit,
 	.owner		= THIS_MODULE,
 };
 
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel