public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Cristian Marussi <cristian.marussi@arm.com>
To: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: sudeep.holla@arm.com, james.quinlan@broadcom.com,
	Jonathan.Cameron@Huawei.com, f.fainelli@gmail.com,
	etienne.carriere@linaro.org, vincent.guittot@linaro.org,
	souvik.chakravarty@arm.com, wleavitt@marvell.com,
	peter.hilber@opensynergy.com, nicola.mazzucato@arm.com,
	tarek.el-sherbiny@arm.com, cristian.marussi@arm.com
Subject: [RFC PATCH 4/6] firmware: arm_scmi: Move errors defs and code to common.h
Date: Tue, 16 Aug 2022 08:24:48 +0100	[thread overview]
Message-ID: <20220816072450.3120959-5-cristian.marussi@arm.com> (raw)
In-Reply-To: <20220816072450.3120959-1-cristian.marussi@arm.com>

Move SCMI error codes definitions and helper to the common.h header
together with the delayed response timeout define.

No functional change.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
---
 drivers/firmware/arm_scmi/common.h | 40 ++++++++++++++++++++++++++++++
 drivers/firmware/arm_scmi/driver.c | 40 ------------------------------
 2 files changed, 40 insertions(+), 40 deletions(-)

diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index 3316bf9eb98a..5ed64bfe9054 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -27,6 +27,46 @@
 #include "protocols.h"
 #include "notify.h"
 
+#define SCMI_MAX_RESPONSE_TIMEOUT	(2 * MSEC_PER_SEC)
+
+enum scmi_error_codes {
+	SCMI_SUCCESS = 0,	/* Success */
+	SCMI_ERR_SUPPORT = -1,	/* Not supported */
+	SCMI_ERR_PARAMS = -2,	/* Invalid Parameters */
+	SCMI_ERR_ACCESS = -3,	/* Invalid access/permission denied */
+	SCMI_ERR_ENTRY = -4,	/* Not found */
+	SCMI_ERR_RANGE = -5,	/* Value out of range */
+	SCMI_ERR_BUSY = -6,	/* Device busy */
+	SCMI_ERR_COMMS = -7,	/* Communication Error */
+	SCMI_ERR_GENERIC = -8,	/* Generic Error */
+	SCMI_ERR_HARDWARE = -9,	/* Hardware Error */
+	SCMI_ERR_PROTOCOL = -10,/* Protocol Error */
+};
+
+static const int scmi_linux_errmap[] = {
+	/* better than switch case as long as return value is continuous */
+	0,			/* SCMI_SUCCESS */
+	-EOPNOTSUPP,		/* SCMI_ERR_SUPPORT */
+	-EINVAL,		/* SCMI_ERR_PARAM */
+	-EACCES,		/* SCMI_ERR_ACCESS */
+	-ENOENT,		/* SCMI_ERR_ENTRY */
+	-ERANGE,		/* SCMI_ERR_RANGE */
+	-EBUSY,			/* SCMI_ERR_BUSY */
+	-ECOMM,			/* SCMI_ERR_COMMS */
+	-EIO,			/* SCMI_ERR_GENERIC */
+	-EREMOTEIO,		/* SCMI_ERR_HARDWARE */
+	-EPROTO,		/* SCMI_ERR_PROTOCOL */
+};
+
+static inline int scmi_to_linux_errno(int errno)
+{
+	int err_idx = -errno;
+
+	if (err_idx >= SCMI_SUCCESS && err_idx < ARRAY_SIZE(scmi_linux_errmap))
+		return scmi_linux_errmap[err_idx];
+	return -EIO;
+}
+
 #define MSG_ID_MASK		GENMASK(7, 0)
 #define MSG_XTRACT_ID(hdr)	FIELD_GET(MSG_ID_MASK, (hdr))
 #define MSG_TYPE_MASK		GENMASK(9, 8)
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 797826237776..141a140792a5 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -37,20 +37,6 @@
 #define CREATE_TRACE_POINTS
 #include <trace/events/scmi.h>
 
-enum scmi_error_codes {
-	SCMI_SUCCESS = 0,	/* Success */
-	SCMI_ERR_SUPPORT = -1,	/* Not supported */
-	SCMI_ERR_PARAMS = -2,	/* Invalid Parameters */
-	SCMI_ERR_ACCESS = -3,	/* Invalid access/permission denied */
-	SCMI_ERR_ENTRY = -4,	/* Not found */
-	SCMI_ERR_RANGE = -5,	/* Value out of range */
-	SCMI_ERR_BUSY = -6,	/* Device busy */
-	SCMI_ERR_COMMS = -7,	/* Communication Error */
-	SCMI_ERR_GENERIC = -8,	/* Generic Error */
-	SCMI_ERR_HARDWARE = -9,	/* Hardware Error */
-	SCMI_ERR_PROTOCOL = -10,/* Protocol Error */
-};
-
 /* List of all SCMI devices active in system */
 static LIST_HEAD(scmi_list);
 /* Protection for the entire list */
@@ -170,30 +156,6 @@ struct scmi_info {
 
 #define handle_to_scmi_info(h)	container_of(h, struct scmi_info, handle)
 
-static const int scmi_linux_errmap[] = {
-	/* better than switch case as long as return value is continuous */
-	0,			/* SCMI_SUCCESS */
-	-EOPNOTSUPP,		/* SCMI_ERR_SUPPORT */
-	-EINVAL,		/* SCMI_ERR_PARAM */
-	-EACCES,		/* SCMI_ERR_ACCESS */
-	-ENOENT,		/* SCMI_ERR_ENTRY */
-	-ERANGE,		/* SCMI_ERR_RANGE */
-	-EBUSY,			/* SCMI_ERR_BUSY */
-	-ECOMM,			/* SCMI_ERR_COMMS */
-	-EIO,			/* SCMI_ERR_GENERIC */
-	-EREMOTEIO,		/* SCMI_ERR_HARDWARE */
-	-EPROTO,		/* SCMI_ERR_PROTOCOL */
-};
-
-static inline int scmi_to_linux_errno(int errno)
-{
-	int err_idx = -errno;
-
-	if (err_idx >= SCMI_SUCCESS && err_idx < ARRAY_SIZE(scmi_linux_errmap))
-		return scmi_linux_errmap[err_idx];
-	return -EIO;
-}
-
 void scmi_notification_instance_data_set(const struct scmi_handle *handle,
 					 void *priv)
 {
@@ -1056,8 +1018,6 @@ static void reset_rx_to_maxsz(const struct scmi_protocol_handle *ph,
 	xfer->rx.len = info->desc->max_msg_size;
 }
 
-#define SCMI_MAX_RESPONSE_TIMEOUT	(2 * MSEC_PER_SEC)
-
 /**
  * do_xfer_with_response() - Do one transfer and wait until the delayed
  *	response is received
-- 
2.32.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-08-16  7:28 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-16  7:24 [RFC PATCH 0/6] Introduce a unified API for SCMI Server testing Cristian Marussi
2022-08-16  7:24 ` [RFC PATCH 1/6] firmware: arm_scmi: Refactor xfer in-flight registration routines Cristian Marussi
2022-08-16  7:24 ` [RFC PATCH 2/6] firmware: arm_scmi: Add bus helpers to enter raw mode Cristian Marussi
2022-08-16  7:24 ` [RFC PATCH 3/6] firmware: arm_scmi: Add xfer raw helpers Cristian Marussi
2022-08-16  7:24 ` Cristian Marussi [this message]
2022-08-16  7:24 ` [RFC PATCH 5/6] firmware: arm_scmi: Add raw transmission support Cristian Marussi
2022-08-16 18:03   ` Mark Brown
2022-08-17  8:38     ` Cristian Marussi
2022-08-17 13:42       ` Mark Brown
2022-08-17 14:21         ` Cristian Marussi
2022-08-16  7:24 ` [RFC PATCH 6/6] firmware: arm_scmi: Call Raw mode hooks from the core stack Cristian Marussi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220816072450.3120959-5-cristian.marussi@arm.com \
    --to=cristian.marussi@arm.com \
    --cc=Jonathan.Cameron@Huawei.com \
    --cc=etienne.carriere@linaro.org \
    --cc=f.fainelli@gmail.com \
    --cc=james.quinlan@broadcom.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nicola.mazzucato@arm.com \
    --cc=peter.hilber@opensynergy.com \
    --cc=souvik.chakravarty@arm.com \
    --cc=sudeep.holla@arm.com \
    --cc=tarek.el-sherbiny@arm.com \
    --cc=vincent.guittot@linaro.org \
    --cc=wleavitt@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox