From: Markus Schneider-Pargmann <msp@baylibre.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: Chun-Jie Chen <chun-jie.chen@mediatek.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Fabien Parent <parent.f@gmail.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
Fabien Parent <fparent@baylibre.com>,
Markus Schneider-Pargmann <msp@baylibre.com>
Subject: [PATCH v3 4/4] soc: mediatek: pm-domains: Add support for MT8365
Date: Mon, 22 Aug 2022 16:43:03 +0200 [thread overview]
Message-ID: <20220822144303.3438467-5-msp@baylibre.com> (raw)
In-Reply-To: <20220822144303.3438467-1-msp@baylibre.com>
From: Fabien Parent <fparent@baylibre.com>
Add the needed board data to support MT8365 SoC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
drivers/soc/mediatek/mt8365-pm-domains.h | 147 +++++++++++++++++++++++
drivers/soc/mediatek/mtk-pm-domains.c | 5 +
2 files changed, 152 insertions(+)
create mode 100644 drivers/soc/mediatek/mt8365-pm-domains.h
diff --git a/drivers/soc/mediatek/mt8365-pm-domains.h b/drivers/soc/mediatek/mt8365-pm-domains.h
new file mode 100644
index 000000000000..950ff90d5560
--- /dev/null
+++ b/drivers/soc/mediatek/mt8365-pm-domains.h
@@ -0,0 +1,147 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __SOC_MEDIATEK_MT8365_PM_DOMAINS_H
+#define __SOC_MEDIATEK_MT8365_PM_DOMAINS_H
+
+#include "mtk-pm-domains.h"
+#include <dt-bindings/power/mediatek,mt8365-power.h>
+
+/*
+ * MT8365 power domain support
+ */
+
+static const struct scpsys_domain_data scpsys_domain_data_mt8365[] = {
+ [MT8365_POWER_DOMAIN_MM] = {
+ .name = "mm",
+ .sta_mask = PWR_STATUS_DISP,
+ .ctl_offs = 0x30c,
+ .pwr_sta_offs = 0x0180,
+ .pwr_sta2nd_offs = 0x0184,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .caps = MTK_SCPD_STRICT_BUS_PROTECTION,
+ .bp_infracfg = {
+ BUS_PROT_WR(BIT(16) | BIT(17), 0x2a8, 0x2ac, 0x258),
+ BUS_PROT_WR(BIT(1) | BIT(2) | BIT(10) | BIT(11), 0x2a0, 0x2a4, 0x228),
+ BUS_PROT_WAY_EN(BIT(6), BIT(24), 0x200, 0x0),
+ BUS_PROT_WAY_EN(BIT(5), BIT(14), 0x234, 0x28),
+ BUS_PROT_WR(BIT(6), 0x2a0, 0x2a4, 0x228),
+ },
+ },
+ [MT8365_POWER_DOMAIN_VENC] = {
+ .name = "venc",
+ .sta_mask = PWR_STATUS_VENC,
+ .ctl_offs = 0x0304,
+ .pwr_sta_offs = 0x0180,
+ .pwr_sta2nd_offs = 0x0184,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .bp_smi = {
+ BUS_PROT_WR(BIT(1), 0x3c4, 0x3c8, 0x3c0),
+ },
+ },
+ [MT8365_POWER_DOMAIN_AUDIO] = {
+ .name = "audio",
+ .sta_mask = PWR_STATUS_AUDIO,
+ .ctl_offs = 0x0314,
+ .pwr_sta_offs = 0x0180,
+ .pwr_sta2nd_offs = 0x0184,
+ .sram_pdn_bits = GENMASK(12, 8),
+ .sram_pdn_ack_bits = GENMASK(17, 13),
+ .bp_infracfg = {
+ BUS_PROT_WR(BIT(27) | BIT(28), 0x2a8, 0x2ac, 0x258),
+ },
+ .caps = MTK_SCPD_ACTIVE_WAKEUP,
+ },
+ [MT8365_POWER_DOMAIN_CONN] = {
+ .name = "conn",
+ .sta_mask = PWR_STATUS_CONN,
+ .ctl_offs = 0x032c,
+ .pwr_sta_offs = 0x0180,
+ .pwr_sta2nd_offs = 0x0184,
+ .sram_pdn_bits = 0,
+ .sram_pdn_ack_bits = 0,
+ .bp_infracfg = {
+ BUS_PROT_WR(BIT(13), 0x2a0, 0x2a4, 0x228),
+ BUS_PROT_WR(BIT(18), 0x2a8, 0x2ac, 0x258),
+ BUS_PROT_WR(BIT(14), 0x2a0, 0x2a4, 0x228),
+ BUS_PROT_WR(BIT(21), 0x2a8, 0x2ac, 0x258),
+ },
+ .caps = MTK_SCPD_ACTIVE_WAKEUP | MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+ [MT8365_POWER_DOMAIN_MFG] = {
+ .name = "mfg",
+ .sta_mask = PWR_STATUS_MFG,
+ .ctl_offs = 0x0338,
+ .pwr_sta_offs = 0x0180,
+ .pwr_sta2nd_offs = 0x0184,
+ .sram_pdn_bits = GENMASK(9, 8),
+ .sram_pdn_ack_bits = GENMASK(13, 12),
+ .bp_infracfg = {
+ BUS_PROT_WR(BIT(25), 0x2a0, 0x2a4, 0x228),
+ BUS_PROT_WR(BIT(21) | BIT(22), 0x2a0, 0x2a4, 0x228),
+ },
+ },
+ [MT8365_POWER_DOMAIN_CAM] = {
+ .name = "cam",
+ .sta_mask = BIT(25),
+ .ctl_offs = 0x0344,
+ .pwr_sta_offs = 0x0180,
+ .pwr_sta2nd_offs = 0x0184,
+ .sram_pdn_bits = GENMASK(9, 8),
+ .sram_pdn_ack_bits = GENMASK(13, 12),
+ .bp_infracfg = {
+ BUS_PROT_WR(BIT(19), 0x2a8, 0x2ac, 0x258),
+ },
+ .bp_smi = {
+ BUS_PROT_WR(BIT(2), 0x3c4, 0x3c8, 0x3c0),
+ },
+ },
+ [MT8365_POWER_DOMAIN_VDEC] = {
+ .name = "vdec",
+ .sta_mask = BIT(31),
+ .ctl_offs = 0x0370,
+ .pwr_sta_offs = 0x0180,
+ .pwr_sta2nd_offs = 0x0184,
+ .sram_pdn_bits = GENMASK(8, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .bp_smi = {
+ BUS_PROT_WR(BIT(3), 0x3c4, 0x3c8, 0x3c0),
+ },
+ },
+ [MT8365_POWER_DOMAIN_APU] = {
+ .name = "apu",
+ .sta_mask = BIT(16),
+ .ctl_offs = 0x0378,
+ .pwr_sta_offs = 0x0180,
+ .pwr_sta2nd_offs = 0x0184,
+ .sram_pdn_bits = GENMASK(14, 8),
+ .sram_pdn_ack_bits = GENMASK(21, 15),
+ .bp_infracfg = {
+ BUS_PROT_WR(BIT(2) | BIT(20), 0x2a8, 0x2ac, 0x258),
+ },
+ .bp_smi = {
+ BUS_PROT_WR(BIT(4), 0x3c4, 0x3c8, 0x3c0),
+ },
+ },
+ [MT8365_POWER_DOMAIN_DSP] = {
+ .name = "dsp",
+ .sta_mask = BIT(17),
+ .ctl_offs = 0x037C,
+ .pwr_sta_offs = 0x0180,
+ .pwr_sta2nd_offs = 0x0184,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(15, 12),
+ .bp_infracfg = {
+ BUS_PROT_WR(BIT(24) | BIT(30) | BIT(31), 0x2a8, 0x2ac, 0x258),
+ },
+ .caps = MTK_SCPD_ACTIVE_WAKEUP,
+ },
+};
+
+static const struct scpsys_soc_data mt8365_scpsys_data = {
+ .domains_data = scpsys_domain_data_mt8365,
+ .num_domains = ARRAY_SIZE(scpsys_domain_data_mt8365),
+};
+
+#endif /* __SOC_MEDIATEK_MT8365_PM_DOMAINS_H */
diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index d323275aa11c..dbabdd688a1f 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -23,6 +23,7 @@
#include "mt8186-pm-domains.h"
#include "mt8192-pm-domains.h"
#include "mt8195-pm-domains.h"
+#include "mt8365-pm-domains.h"
#define MTK_POLL_DELAY_US 10
#define MTK_POLL_TIMEOUT USEC_PER_SEC
@@ -706,6 +707,10 @@ static const struct of_device_id scpsys_of_match[] = {
.compatible = "mediatek,mt8195-power-controller",
.data = &mt8195_scpsys_data,
},
+ {
+ .compatible = "mediatek,mt8365-power-controller",
+ .data = &mt8365_scpsys_data,
+ },
{ }
};
--
2.37.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2022-08-22 14:48 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-22 14:42 [PATCH v3 0/4] soc: mediatek: MT8365 power support Markus Schneider-Pargmann
2022-08-22 14:43 ` [PATCH v3 1/4] dt-bindings: power: Add MT8365 power domains Markus Schneider-Pargmann
2022-08-22 18:13 ` Krzysztof Kozlowski
2022-08-22 14:43 ` [PATCH v3 2/4] soc: mediatek: Add support of WAY_EN operations Markus Schneider-Pargmann
2022-08-22 16:17 ` Matthias Brugger
2022-09-06 9:49 ` Markus Schneider-Pargmann
2022-09-13 17:40 ` Matthias Brugger
2022-08-22 14:43 ` [PATCH v3 3/4] soc: mediatek: add support of MTK_SCPD_STRICT_BUSP cap Markus Schneider-Pargmann
2022-08-30 10:28 ` AngeloGioacchino Del Regno
2022-08-22 14:43 ` Markus Schneider-Pargmann [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220822144303.3438467-5-msp@baylibre.com \
--to=msp@baylibre.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=chun-jie.chen@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=fparent@baylibre.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=parent.f@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox