From: Charles Mirabile <cmirabil@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Charles Mirabile <cmirabil@redhat.com>,
Peter Robinson <pbrobinson@gmail.com>,
Serge Schneider <serge@raspberrypi.org>,
Stefan Wahren <stefan.wahren@i2se.com>,
Nicolas Saenz Julienne <nicolassaenzj@gmail.com>,
Mattias Brugger <mbrugger@suse.com>,
linux-rpi-kernel@lists.infradead.org,
linux-arm-kernel@lists.infradead.org, rh-kdlp@googlegroups.com,
Joel Savitz <jsavitz@redhat.com>
Subject: [PATCH 5/5] DO NOT MERGE: full sensehat device tree overlay for raspberry pi 4
Date: Tue, 23 Aug 2022 13:41:58 -0400 [thread overview]
Message-ID: <20220823174158.45579-6-cmirabil@redhat.com> (raw)
In-Reply-To: <20220823174158.45579-1-cmirabil@redhat.com>
This patch shold not be merged - dtbs files are not stored in the
kernel tree. We just provide this file so the code can be tested.
This overlay is suitable for testing the driver, it can be compiled with
dtc and put in the /boot/overlays/ folder then specified in config.txt
by putting the lines:
dtoverlay= #suppress loading of default overlay for HAT
dtoverlay=sensehat #load custom overlay
at the beginning before any other lines in config.txt
Co-developed-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
---
sensehat.dtbs | 52 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 52 insertions(+)
create mode 100644 sensehat.dtbs
diff --git a/sensehat.dtbs b/sensehat.dtbs
new file mode 100644
index 000000000000..9e5a6d9229b1
--- /dev/null
+++ b/sensehat.dtbs
@@ -0,0 +1,52 @@
+/dts-v1/;
+/plugin/;
+
+/ {
+ compatible = "brcm,bcm2835";
+};
+
+&i2c1 {
+ #address-cells = <0x01>;
+ #size-cells = <0x00>;
+ status = "okay";
+
+ sensehat@46 {
+ compatible = "raspberrypi,sensehat";
+ reg = <0x46>;
+ interrupt-parent = <&gpio>;
+ status = "okay";
+ display {
+ compatible = "raspberrypi,sensehat-display";
+ status = "okay";
+ };
+ joystick {
+ compatible = "raspberrypi,sensehat-joystick";
+ interrupts = <23 1>;
+ status = "okay";
+ };
+ };
+
+ lsm9ds1-magn@1c {
+ compatible = "st,lsm9ds1-magn";
+ reg = <0x1c>;
+ status = "okay";
+ };
+
+ lsm9ds1-accel@6a {
+ compatible = "st,lsm9ds1-accel";
+ reg = <0x6a>;
+ status = "okay";
+ };
+
+ lps25h-press@5c {
+ compatible = "st,lps25h-press";
+ reg = <0x5c>;
+ status = "okay";
+ };
+
+ hts221-humid@5f {
+ compatible = "st,hts221-humid\0st,hts221";
+ reg = <0x5f>;
+ status = "okay";
+ };
+};
--
2.31.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-08-23 17:46 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-23 17:41 [PATCH v10 0/6] Raspberry Pi Sense HAT driver Charles Mirabile
2022-08-23 17:41 ` [PATCH 1/5] drivers/mfd: sensehat: Add Raspberry Pi Sense HAT to simple_mfd_i2c Charles Mirabile
2022-09-05 13:58 ` Lee Jones
2022-09-06 2:28 ` Bagas Sanjaya
2022-08-23 17:41 ` [PATCH 2/5] drivers/auxdisplay: sensehat: Raspberry Pi Sense HAT display driver Charles Mirabile
2022-08-24 11:26 ` Matthias Brugger
2022-09-06 2:31 ` Bagas Sanjaya
2022-09-08 15:26 ` Wander Lairson Costa
2022-08-23 17:41 ` [PATCH 3/5] dt-bindings: mfd: sensehat: Add Raspberry Pi Sense HAT schema Charles Mirabile
2022-08-24 12:13 ` Matthias Brugger
2022-09-06 2:47 ` Bagas Sanjaya
2022-08-23 17:41 ` [PATCH 4/5] MAINTAINERS: Add sensehat driver authors to MAINTAINERS Charles Mirabile
2022-09-06 2:48 ` Bagas Sanjaya
2022-08-23 17:41 ` Charles Mirabile [this message]
2022-09-06 2:52 ` [PATCH 5/5] DO NOT MERGE: full sensehat device tree overlay for raspberry pi 4 Bagas Sanjaya
2022-09-06 10:52 ` Matthias Brugger
2022-08-23 21:30 ` [PATCH v10 0/6] Raspberry Pi Sense HAT driver Stefan Wahren
2022-08-24 12:06 ` Charles Mirabile
2022-08-24 15:30 ` Maxime Ripard
2022-08-24 18:21 ` Stefan Wahren
2022-08-24 11:28 ` Matthias Brugger
2022-08-24 12:17 ` Charles Mirabile
2022-09-06 2:21 ` Bagas Sanjaya
2022-09-06 10:53 ` Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220823174158.45579-6-cmirabil@redhat.com \
--to=cmirabil@redhat.com \
--cc=jsavitz@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=mbrugger@suse.com \
--cc=nicolassaenzj@gmail.com \
--cc=pbrobinson@gmail.com \
--cc=rh-kdlp@googlegroups.com \
--cc=serge@raspberrypi.org \
--cc=stefan.wahren@i2se.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).