From: Bjorn Helgaas <helgaas@kernel.org>
To: Richard Zhu <hongxing.zhu@nxp.com>
Cc: a.fatoum@pengutronix.de, l.stach@pengutronix.de,
bhelgaas@google.com, lorenzo.pieralisi@arm.com, vkoul@kernel.org,
marcel.ziswiler@toradex.com, kishon@ti.com,
linux-phy@lists.infradead.org, linux-pci@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
linux-imx@nxp.com
Subject: Re: [PATCH v2] phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()
Date: Fri, 2 Sep 2022 12:04:49 -0500 [thread overview]
Message-ID: <20220902170449.GA354728@bhelgaas> (raw)
In-Reply-To: <1661928956-12727-1-git-send-email-hongxing.zhu@nxp.com>
On Wed, Aug 31, 2022 at 02:55:56PM +0800, Richard Zhu wrote:
> Refer to phy_core driver, phy_init() must be called before phy_power_on().
> Fix the wrong order of phy_init() and phy_power_on() here.
> Squash the changes into one patch to avoid the possible bi-section hole.
Avoiding bisection holes goes without saying, so I don't think we need
to even mention it ;)
> Fixes: 1aa97b002258 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver")
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
I propose merging this via PCI, since I suspect pci-imx6.c is more
active than phy-fsl-imx8m-pcie.c.
Vinod, if you agree, I'm sure Lorenzo will look for your ack.
> ---
> drivers/pci/controller/dwc/pci-imx6.c | 6 +++---
> drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 8 ++++----
> 2 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 6e5debdbc55b..b5f0de455a7b 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -935,7 +935,7 @@ static int imx6_pcie_host_init(struct dw_pcie_rp *pp)
> }
>
> if (imx6_pcie->phy) {
> - ret = phy_power_on(imx6_pcie->phy);
> + ret = phy_init(imx6_pcie->phy);
> if (ret) {
> dev_err(dev, "pcie PHY power up failed\n");
> goto err_clk_disable;
> @@ -949,7 +949,7 @@ static int imx6_pcie_host_init(struct dw_pcie_rp *pp)
> }
>
> if (imx6_pcie->phy) {
> - ret = phy_init(imx6_pcie->phy);
> + ret = phy_power_on(imx6_pcie->phy);
> if (ret) {
> dev_err(dev, "waiting for PHY ready timeout!\n");
> goto err_phy_off;
> @@ -961,7 +961,7 @@ static int imx6_pcie_host_init(struct dw_pcie_rp *pp)
>
> err_phy_off:
> if (imx6_pcie->phy)
> - phy_power_off(imx6_pcie->phy);
> + phy_exit(imx6_pcie->phy);
> err_clk_disable:
> imx6_pcie_clk_disable(imx6_pcie);
> err_reg_disable:
> diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> index ad7d2edfc414..c93286483b42 100644
> --- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> +++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> @@ -59,7 +59,7 @@ struct imx8_pcie_phy {
> bool clkreq_unused;
> };
>
> -static int imx8_pcie_phy_init(struct phy *phy)
> +static int imx8_pcie_phy_power_on(struct phy *phy)
> {
> int ret;
> u32 val, pad_mode;
> @@ -137,14 +137,14 @@ static int imx8_pcie_phy_init(struct phy *phy)
> return ret;
> }
>
> -static int imx8_pcie_phy_power_on(struct phy *phy)
> +static int imx8_pcie_phy_init(struct phy *phy)
> {
> struct imx8_pcie_phy *imx8_phy = phy_get_drvdata(phy);
>
> return clk_prepare_enable(imx8_phy->clk);
> }
>
> -static int imx8_pcie_phy_power_off(struct phy *phy)
> +static int imx8_pcie_phy_exit(struct phy *phy)
> {
> struct imx8_pcie_phy *imx8_phy = phy_get_drvdata(phy);
>
> @@ -155,8 +155,8 @@ static int imx8_pcie_phy_power_off(struct phy *phy)
>
> static const struct phy_ops imx8_pcie_phy_ops = {
> .init = imx8_pcie_phy_init,
> + .exit = imx8_pcie_phy_exit,
> .power_on = imx8_pcie_phy_power_on,
> - .power_off = imx8_pcie_phy_power_off,
> .owner = THIS_MODULE,
> };
>
> --
> 2.25.1
>
>
> --
> linux-phy mailing list
> linux-phy@lists.infradead.org
> https://lists.infradead.org/mailman/listinfo/linux-phy
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-02 17:05 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-31 6:55 [PATCH v2] phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on() Richard Zhu
2022-09-02 17:04 ` Bjorn Helgaas [this message]
2022-09-05 2:14 ` Hongxing Zhu
2022-09-02 17:49 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220902170449.GA354728@bhelgaas \
--to=helgaas@kernel.org \
--cc=a.fatoum@pengutronix.de \
--cc=bhelgaas@google.com \
--cc=hongxing.zhu@nxp.com \
--cc=kernel@pengutronix.de \
--cc=kishon@ti.com \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=marcel.ziswiler@toradex.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).