From: Li Yang <leoyang.li@nxp.com>
To: shawnguo@kernel.org, devicetree@vger.kernel.org
Cc: robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Ioana Radulescu <ruxandra.radulescu@nxp.com>,
Li Yang <leoyang.li@nxp.com>
Subject: [PATCH v4 2/5] arm64: dts: ls2080a-rdb: add phy nodes
Date: Wed, 14 Sep 2022 16:15:35 -0500 [thread overview]
Message-ID: <20220914211538.29473-3-leoyang.li@nxp.com> (raw)
In-Reply-To: <20220914211538.29473-1-leoyang.li@nxp.com>
From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Define PHY nodes on the board.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
.../boot/dts/freescale/fsl-ls2080a-rdb.dts | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
index 44894356059c..8b6915136997 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -14,6 +14,7 @@
#include "fsl-ls2080a.dtsi"
#include "fsl-ls208xa-rdb.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
model = "Freescale Layerscape 2080a RDB Board";
@@ -23,3 +24,71 @@ chosen {
stdout-path = "serial1:115200n8";
};
};
+
+&dpmac5 {
+ phy-handle = <&mdio2_phy1>;
+ phy-connection-type = "10gbase-r";
+};
+
+&dpmac6 {
+ phy-handle = <&mdio2_phy2>;
+ phy-connection-type = "10gbase-r";
+};
+
+&dpmac7 {
+ phy-handle = <&mdio2_phy3>;
+ phy-connection-type = "10gbase-r";
+};
+
+&dpmac8 {
+ phy-handle = <&mdio2_phy4>;
+ phy-connection-type = "10gbase-r";
+};
+
+&emdio1 {
+ status = "disabled";
+
+ /* CS4340 PHYs */
+ mdio1_phy1: emdio1-phy@10 {
+ reg = <0x10>;
+ };
+
+ mdio1_phy2: emdio1-phy@11 {
+ reg = <0x11>;
+ };
+
+ mdio1_phy3: emdio1-phy@12 {
+ reg = <0x12>;
+ };
+
+ mdio1_phy4: emdio1-phy@13 {
+ reg = <0x13>;
+ };
+};
+
+&emdio2 {
+ /* AQR405 PHYs */
+ mdio2_phy1: emdio2-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0>;
+ };
+
+ mdio2_phy2: emdio2-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x1>;
+ };
+
+ mdio2_phy3: emdio2-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x2>;
+ };
+
+ mdio2_phy4: emdio2-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x3>;
+ };
+};
--
2.37.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-14 21:17 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-14 21:15 [PATCH v4 0/5] ls208xa dts updates Li Yang
2022-09-14 21:15 ` [PATCH v4 1/5] arm64: dts: ls208xa-qds: add mdio mux nodes from on-board FPGA Li Yang
2022-09-14 21:15 ` Li Yang [this message]
2022-09-14 21:15 ` [PATCH v4 3/5] arm64: dts: ls2081a-rdb: Add DTS for NXP LS2081ARDB Li Yang
2022-09-14 21:15 ` [PATCH v4 4/5] arm64: dts: ls208xa-rdb: fix errata E-00013 Li Yang
2022-09-14 21:15 ` [PATCH v4 5/5] arm64: dts: ls208x: remove NXP Erratum A008585 from LS2088A Li Yang
2022-09-16 12:10 ` [PATCH v4 0/5] ls208xa dts updates Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220914211538.29473-3-leoyang.li@nxp.com \
--to=leoyang.li@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=ruxandra.radulescu@nxp.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox