linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Stephen Boyd <sboyd@kernel.org>
To: Daniel Palmer <daniel@0x0f.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Romain Perier <romain.perier@gmail.com>,
	linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Willy Tarreau <w@1wt.eu>
Subject: Re: [PATCH RESEND v5 1/1] clk: mstar: msc313 cpupll clk driver
Date: Fri, 30 Sep 2022 12:17:40 -0700	[thread overview]
Message-ID: <20220930191742.9A9FEC433C1@smtp.kernel.org> (raw)
In-Reply-To: <20220603190509.45986-2-romain.perier@gmail.com>

Quoting Romain Perier (2022-06-03 12:05:09)
> From: Daniel Palmer <daniel@0x0f.com>
> 
> Add a driver for the CPU pll/ARM pll/MIPS pll that is present
> in MStar SoCs.
> 
> Currently there is no documentation for this block so it's possible
> this driver isn't entirely correct.
> 
> Only tested on the version of this IP in the MStar/SigmaStar
> ARMv7 SoCs.
> 
> Co-authored-by: Willy Tarreau <w@1wt.eu>

This is not a standard tag, maybe Co-developed-by is what you want? A
Signed-off-by tag should be here from Willy Tarreau then.

> Signed-off-by: Daniel Palmer <daniel@0x0f.com>

Your Signed-off-by needs to be here. I can't apply this otherwise.

> diff --git a/drivers/clk/mstar/Kconfig b/drivers/clk/mstar/Kconfig
> index de37e1bce2d2..146eeb637318 100644
> --- a/drivers/clk/mstar/Kconfig
> +++ b/drivers/clk/mstar/Kconfig
> @@ -1,4 +1,11 @@
>  # SPDX-License-Identifier: GPL-2.0-only
> +config MSTAR_MSC313_CPUPLL
> +       bool "MStar CPUPLL driver"
> +       depends on ARCH_MSTARV7 || COMPILE_TEST
> +       default ARCH_MSTARV7
> +       help
> +         Support for the CPU PLL present on MStar/Sigmastar SoCs.
> +
>  config MSTAR_MSC313_MPLL
>         bool "MStar MPLL driver"
>         depends on ARCH_MSTARV7 || COMPILE_TEST
> @@ -7,3 +14,4 @@ config MSTAR_MSC313_MPLL
>         help
>           Support for the MPLL PLL and dividers block present on
>           MStar/Sigmastar SoCs.
> +
> diff --git a/drivers/clk/mstar/Makefile b/drivers/clk/mstar/Makefile
> index f8dcd25ede1d..21296a04e65a 100644
> --- a/drivers/clk/mstar/Makefile
> +++ b/drivers/clk/mstar/Makefile
> @@ -2,5 +2,5 @@
>  #
>  # Makefile for mstar specific clk
>  #
> -
> +obj-$(CONFIG_MSTAR_MSC313_CPUPLL) += clk-msc313-cpupll.o
>  obj-$(CONFIG_MSTAR_MSC313_MPLL) += clk-msc313-mpll.o
> diff --git a/drivers/clk/mstar/clk-msc313-cpupll.c b/drivers/clk/mstar/clk-msc313-cpupll.c
> new file mode 100644
> index 000000000000..c57b509e8c20
> --- /dev/null
> +++ b/drivers/clk/mstar/clk-msc313-cpupll.c
> @@ -0,0 +1,221 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019 Daniel Palmer <daniel@thingy.jp>
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>

Ought to include kernel.h and device.h too.

> +
[...]
> +
> +static const struct clk_ops msc313_cpupll_ops = {
> +       .recalc_rate    = msc313_cpupll_recalc_rate,
> +       .round_rate     = msc313_cpupll_round_rate,
> +       .set_rate       = msc313_cpupll_set_rate,
> +};
> +
> +static const struct of_device_id msc313_cpupll_of_match[] = {
> +       { .compatible = "mstar,msc313-cpupll" },
> +       {}
> +};
> +
> +static const struct clk_parent_data cpupll_parent = {

Why not put this on the stack? It doesn't have to live forever.

> +       .index  = 0,
> +};
> +
> +static int msc313_cpupll_probe(struct platform_device *pdev)
> +{
> +       struct clk_init_data clk_init = {};
> +       struct device *dev = &pdev->dev;
> +       struct msc313_cpupll *cpupll;
> +       int ret;
> +
> +       cpupll = devm_kzalloc(&pdev->dev, sizeof(*cpupll), GFP_KERNEL);
> +       if (!cpupll)
> +               return -ENOMEM;
> +
> +       cpupll->base = devm_platform_ioremap_resource(pdev, 0);
> +       if (IS_ERR(cpupll->base))
> +               return PTR_ERR(cpupll->base);
> +
> +       /* LPF might not contain the current frequency so fix that up */
> +       msc313_cpupll_reg_write32(cpupll, REG_LPF_LOW_L,
> +                                 msc313_cpupll_reg_read32(cpupll, REG_CURRENT));
> +
> +       clk_init.name = dev_name(dev);
> +       clk_init.ops = &msc313_cpupll_ops;
> +       clk_init.parent_data = &cpupll_parent;
> +       clk_init.num_parents = 1;
> +       cpupll->clk_hw.init = &clk_init;
> +
> +       ret = devm_clk_hw_register(dev, &cpupll->clk_hw);
> +       if (ret)
> +               return ret;
> +
> +       return of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_simple_get, &cpupll->clk_hw);

Use devm to add the provider too.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-09-30 19:18 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-03 19:05 [PATCH RESEND v5 0/1] ARM: mstar: cpupll Romain Perier
2022-06-03 19:05 ` [PATCH RESEND v5 1/1] clk: mstar: msc313 cpupll clk driver Romain Perier
2022-09-30 19:17   ` Stephen Boyd [this message]
2022-09-30 19:35     ` Willy Tarreau
2022-10-05  7:33       ` Romain Perier
2022-10-05  7:34         ` Willy Tarreau
2022-10-05  7:35     ` Romain Perier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220930191742.9A9FEC433C1@smtp.kernel.org \
    --to=sboyd@kernel.org \
    --cc=daniel@0x0f.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=romain.perier@gmail.com \
    --cc=w@1wt.eu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).