linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Oliver Upton <oliver.upton@linux.dev>
To: Marc Zyngier <maz@kernel.org>, James Morse <james.morse@arm.com>,
	Alexandru Elisei <alexandru.elisei@arm.com>
Cc: linux-arm-kernel@lists.infradead.org,
	kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
	Reiji Watanabe <reijiw@google.com>,
	Ricardo Koller <ricarkol@google.com>,
	David Matlack <dmatlack@google.com>,
	Quentin Perret <qperret@google.com>,
	Ben Gardon <bgardon@google.com>, Gavin Shan <gshan@redhat.com>,
	Peter Xu <peterx@redhat.com>, Will Deacon <will@kernel.org>,
	Sean Christopherson <seanjc@google.com>,
	kvmarm@lists.linux.dev, Oliver Upton <oliver.upton@linux.dev>
Subject: [PATCH v2 00/15] KVM: arm64: Parallel stage-2 fault handling
Date: Fri,  7 Oct 2022 23:28:03 +0000	[thread overview]
Message-ID: <20221007232818.459650-1-oliver.upton@linux.dev> (raw)

Presently KVM only takes a read lock for stage 2 faults if it believes
the fault can be fixed by relaxing permissions on a PTE (write unprotect
for dirty logging). Otherwise, stage 2 faults grab the write lock, which
predictably can pile up all the vCPUs in a sufficiently large VM.

Like the TDP MMU for x86, this series loosens the locking around
manipulations of the stage 2 page tables to allow parallel faults. RCU
and atomics are exploited to safely build/destroy the stage 2 page
tables in light of multiple software observers.

Patches 1-4 clean up the context associated with a page table walk / PTE
visit. This is helpful for:
 - Extending the context passed through for a visit
 - Building page table walkers that operate outside of a kvm_pgtable
   context (e.g. RCU callback)

Patches 5-6 clean up the stage-2 map walkers by calling a helper to tear
down removed tables. There is a small improvement here in that a broken
PTE is replaced more quickly, as page table teardown happens afterwards.

Patches 7-9 sprinkle in RCU to the page table walkers, punting the
teardown of removed tables to an RCU callback.

Patches 10-14 implement the meat of this series, extending the
'break-before-make' sequence with atomics to realize locking on PTEs.
Effectively a cmpxchg() is used to 'break' a PTE, thereby serializing
changes to a given PTE.

Finally, patch 15 flips the switch on all the new code and starts
grabbing the read side of the MMU lock for stage 2 faults.

Applies to kvmarm-6.1. Tested with KVM selftests, kvm-unit-tests, and
Google's internal VMM (Vanadium). Also tested with lockdep enabled and
saw no puke for RCU. Planning on following up testing migration with
QEMU. Got frustrated with my cross-building environment and I wanted to
get the patches out before the weekend :)

benchmarked with dirty_log_perf_test, scaling from 1 to 48 vCPUs with
4GB of memory per vCPU backed by THP.

  ./dirty_log_perf_test -s anonymous_thp -m 2 -b 4G -v ${NR_VCPUS}

Time to dirty memory:

        +-------+---------+------------------+
        | vCPUs | kvmarm  | kvmarm + series  |
        +-------+---------+------------------+
        |     1 | 0.87s   | 0.93s            |
        |     2 | 1.11s   | 1.16s            |
        |     4 | 2.39s   | 1.27s            |
        |     8 | 5.01s   | 1.39s            |
        |    16 | 8.89s   | 2.07s            |
        |    32 | 19.90s  | 4.45s            |
        |    48 | 32.10s  | 6.23s            |
        +-------+---------+------------------+

It is also worth mentioning that the time to populate memory has
improved:

        +-------+---------+------------------+
        | vCPUs | kvmarm  | kvmarm + series  |
        +-------+---------+------------------+
        |     1 | 0.21s   | 0.17s            |
        |     2 | 0.26s   | 0.23s            |
        |     4 | 0.39s   | 0.31s            |
        |     8 | 0.68s   | 0.39s            |
        |    16 | 1.26s   | 0.53s            |
        |    32 | 2.51s   | 1.04s            |
        |    48 | 3.94s   | 1.55s            |
        +-------+---------+------------------+

v1 -> v2:
 - It builds! :-)
 - Roll all of the context associated with PTE visit into a
   stack-allocated structure
 - Clean up the oddball handling of PTE values, avoiding a UAF along the
   way (Quentin)
 - Leave the re-reading of the PTE after WALK_LEAF in place instead of
   attempting to return the installed PTE value (David)
 - Mention why RCU is stubbed out for hyp page table walkers (David)
 - Ensure that all reads of page table memory pass through an
   RCU-protected pointer. The lifetime of the dereference is contained
   within __kvm_pgtable_visit() (David).
 - Ensure that no user of stage2_map_walker() passes TABLE_POST (David)
 - Unwire the page table walkers from relying on struct kvm_pgtable,
   simplifying the passed context to RCU callbacks.
 - Key rcu_dereference() off of a page table flag indicating a shared
   walk. This is clear when either (1) the write lock is held or (2)
   called from an RCU callback.

v1: https://lore.kernel.org/kvmarm/20220830194132.962932-1-oliver.upton@linux.dev/

Oliver Upton (15):
  KVM: arm64: Combine visitor arguments into a context structure
  KVM: arm64: Stash observed pte value in visitor context
  KVM: arm64: Pass mm_ops through the visitor context
  KVM: arm64: Don't pass kvm_pgtable through kvm_pgtable_walk_data
  KVM: arm64: Add a helper to tear down unlinked stage-2 subtrees
  KVM: arm64: Tear down unlinked stage-2 subtree after break-before-make
  KVM: arm64: Use an opaque type for pteps
  KVM: arm64: Protect stage-2 traversal with RCU
  KVM: arm64: Free removed stage-2 tables in RCU callback
  KVM: arm64: Atomically update stage 2 leaf attributes in parallel
    walks
  KVM: arm64: Split init and set for table PTE
  KVM: arm64: Make block->table PTE changes parallel-aware
  KVM: arm64: Make leaf->leaf PTE changes parallel-aware
  KVM: arm64: Make table->block changes parallel-aware
  KVM: arm64: Handle stage-2 faults in parallel

 arch/arm64/include/asm/kvm_pgtable.h  |  85 +++-
 arch/arm64/kvm/hyp/nvhe/mem_protect.c |  21 +-
 arch/arm64/kvm/hyp/nvhe/setup.c       |  22 +-
 arch/arm64/kvm/hyp/pgtable.c          | 624 ++++++++++++++------------
 arch/arm64/kvm/mmu.c                  |  51 ++-
 5 files changed, 456 insertions(+), 347 deletions(-)


base-commit: b302ca52ba8235ff0e18c0fa1fa92b51784aef6a
-- 
2.38.0.rc1.362.ged0d419d3c-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2022-10-07 23:30 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-07 23:28 Oliver Upton [this message]
2022-10-07 23:28 ` [PATCH v2 01/15] KVM: arm64: Combine visitor arguments into a context structure Oliver Upton
2022-10-07 23:28 ` [PATCH v2 02/15] KVM: arm64: Stash observed pte value in visitor context Oliver Upton
2022-10-07 23:28 ` [PATCH v2 03/15] KVM: arm64: Pass mm_ops through the " Oliver Upton
2022-10-07 23:28 ` [PATCH v2 04/15] KVM: arm64: Don't pass kvm_pgtable through kvm_pgtable_walk_data Oliver Upton
2022-10-07 23:28 ` [PATCH v2 05/15] KVM: arm64: Add a helper to tear down unlinked stage-2 subtrees Oliver Upton
2022-10-07 23:28 ` [PATCH v2 06/15] KVM: arm64: Tear down unlinked stage-2 subtree after break-before-make Oliver Upton
2022-10-28 18:41   ` Ricardo Koller
2022-10-28 18:43     ` Ricardo Koller
2022-10-28 18:53       ` Ricardo Koller
2022-10-07 23:28 ` [PATCH v2 07/15] KVM: arm64: Use an opaque type for pteps Oliver Upton
2022-10-19 23:17   ` Sean Christopherson
2022-10-20  8:32     ` Oliver Upton
2022-10-27 22:31       ` Oliver Upton
2022-10-07 23:28 ` [PATCH v2 08/15] KVM: arm64: Protect stage-2 traversal with RCU Oliver Upton
2022-10-19 23:29   ` Sean Christopherson
2022-10-20  8:34     ` Oliver Upton
2022-10-07 23:28 ` [PATCH v2 09/15] KVM: arm64: Free removed stage-2 tables in RCU callback Oliver Upton
2022-10-07 23:28 ` [PATCH v2 10/15] KVM: arm64: Atomically update stage 2 leaf attributes in parallel walks Oliver Upton
2022-10-07 23:30 ` [PATCH v2 11/15] KVM: arm64: Split init and set for table PTE Oliver Upton
2022-10-07 23:31 ` [PATCH v2 12/15] KVM: arm64: Make block->table PTE changes parallel-aware Oliver Upton
2022-10-07 23:32 ` [PATCH v2 13/15] KVM: arm64: Make leaf->leaf " Oliver Upton
2022-10-07 23:32 ` [PATCH v2 14/15] KVM: arm64: Make table->block " Oliver Upton
2022-10-07 23:32 ` [PATCH v2 15/15] KVM: arm64: Handle stage-2 faults in parallel Oliver Upton
     [not found]   ` <202210081008.A9PLyQx2-lkp@intel.com>
2022-10-08  3:14     ` Oliver Upton
2022-10-19 23:32   ` Sean Christopherson
2022-10-20  8:35     ` Oliver Upton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221007232818.459650-1-oliver.upton@linux.dev \
    --to=oliver.upton@linux.dev \
    --cc=alexandru.elisei@arm.com \
    --cc=bgardon@google.com \
    --cc=dmatlack@google.com \
    --cc=gshan@redhat.com \
    --cc=james.morse@arm.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=kvmarm@lists.linux.dev \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=maz@kernel.org \
    --cc=peterx@redhat.com \
    --cc=qperret@google.com \
    --cc=reijiw@google.com \
    --cc=ricarkol@google.com \
    --cc=seanjc@google.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).