From: "Pali Rohár" <pali@kernel.org>
To: Gregory Clement <gregory.clement@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: marvell: Fix compatible strings for Armada 3720 boards
Date: Sun, 9 Oct 2022 14:06:39 +0200 [thread overview]
Message-ID: <20221009120639.hds2nhdynwdzjizr@pali> (raw)
In-Reply-To: <20220930233802.wjfzk3xkphm565uz@pali>
PING
On Saturday 01 October 2022 01:38:02 Pali Rohár wrote:
> Gregory: ping
>
> On Wednesday 13 July 2022 14:56:44 Pali Rohár wrote:
> > All Armada 3720 boards have Armada 3720 processor which is of Armada 3700
> > family and do not have Armada 3710 processor. So none of them should have
> > compatible string for Armada 3710 processor.
> >
> > Fix compatible string for all these boards by removing wrong processor
> > string "marvell,armada3710" and adding family string "marvell,armada3700"
> > as the last one. (Note that this is same way how are defined Armada 3710
> > DTS files).
> >
> > Signed-off-by: Pali Rohár <pali@kernel.org>
> > ---
> > arch/arm64/boot/dts/marvell/armada-3720-db.dts | 2 +-
> > arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts | 2 +-
> > arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts | 2 +-
> > arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts | 2 +-
> > arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts | 2 +-
> > arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts | 2 +-
> > arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 2 +-
> > arch/arm64/boot/dts/marvell/armada-372x.dtsi | 2 +-
> > 8 files changed, 8 insertions(+), 8 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
> > index bd4e61d5448e..0cfb38492021 100644
> > --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
> > +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
> > @@ -18,7 +18,7 @@
> >
> > / {
> > model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3";
> > - compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";
> > + compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3700";
> >
> > chosen {
> > stdout-path = "serial0:115200n8";
> > diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
> > index 5c4d8f379704..6715a19c1483 100644
> > --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
> > +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
> > @@ -18,7 +18,7 @@
> > / {
> > model = "Globalscale Marvell ESPRESSOBin Board (eMMC)";
> > compatible = "globalscale,espressobin-emmc", "globalscale,espressobin",
> > - "marvell,armada3720", "marvell,armada3710";
> > + "marvell,armada3720", "marvell,armada3700";
> > };
> >
> > &sdhci0 {
> > diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
> > index 070725b81be5..447760b69850 100644
> > --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
> > +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
> > @@ -13,7 +13,7 @@
> > / {
> > model = "Globalscale Marvell ESPRESSOBin Ultra Board";
> > compatible = "globalscale,espressobin-ultra", "marvell,armada3720",
> > - "marvell,armada3710";
> > + "marvell,armada3700";
> >
> > aliases {
> > /* ethernet1 is WAN port */
> > diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
> > index 75401eab4d42..2a8aa3901a9f 100644
> > --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
> > +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
> > @@ -19,7 +19,7 @@
> > model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)";
> > compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7",
> > "globalscale,espressobin", "marvell,armada3720",
> > - "marvell,armada3710";
> > + "marvell,armada3700";
> >
> > aliases {
> > /* ethernet1 is wan port */
> > diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
> > index 48a7f50fb427..b03af87611a9 100644
> > --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
> > +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
> > @@ -18,7 +18,7 @@
> > / {
> > model = "Globalscale Marvell ESPRESSOBin Board V7";
> > compatible = "globalscale,espressobin-v7", "globalscale,espressobin",
> > - "marvell,armada3720", "marvell,armada3710";
> > + "marvell,armada3720", "marvell,armada3700";
> >
> > aliases {
> > /* ethernet1 is wan port */
> > diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
> > index 1542d836c090..c5a834b33b77 100644
> > --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
> > +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
> > @@ -16,5 +16,5 @@
> >
> > / {
> > model = "Globalscale Marvell ESPRESSOBin Board";
> > - compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
> > + compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3700";
> > };
> > diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
> > index caf9c8529fca..5840ed129309 100644
> > --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
> > +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
> > @@ -14,7 +14,7 @@
> > / {
> > model = "CZ.NIC Turris Mox Board";
> > compatible = "cznic,turris-mox", "marvell,armada3720",
> > - "marvell,armada3710";
> > + "marvell,armada3700";
> >
> > aliases {
> > spi0 = &spi0;
> > diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
> > index 5ce55bdbb995..02ae1e153288 100644
> > --- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi
> > +++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
> > @@ -13,7 +13,7 @@
> >
> > / {
> > model = "Marvell Armada 3720 SoC";
> > - compatible = "marvell,armada3720", "marvell,armada3710";
> > + compatible = "marvell,armada3720", "marvell,armada3700";
> >
> > cpus {
> > cpu1: cpu@1 {
> > --
> > 2.20.1
> >
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-10-09 12:07 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-13 12:56 [PATCH] arm64: dts: marvell: Fix compatible strings for Armada 3720 boards Pali Rohár
2022-07-13 19:42 ` Krzysztof Kozlowski
2022-07-13 20:03 ` Pali Rohár
2022-07-14 6:56 ` Krzysztof Kozlowski
2022-07-14 9:36 ` Pali Rohár
2022-08-08 20:24 ` Pali Rohár
2022-08-08 20:33 ` Andrew Lunn
2022-08-08 20:39 ` Pali Rohár
2022-09-02 22:31 ` Pali Rohár
2022-09-19 23:19 ` Pali Rohár
2022-09-30 23:38 ` Pali Rohár
2022-10-09 12:06 ` Pali Rohár [this message]
2022-11-01 22:44 ` Pali Rohár
2022-11-28 18:21 ` Pali Rohár
2022-12-16 18:21 ` Pali Rohár
2023-01-22 11:28 ` Pali Rohár
2023-02-01 7:46 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221009120639.hds2nhdynwdzjizr@pali \
--to=pali@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox