[PATCH AUTOSEL 6.0 02/46] ARM: dts: imx6: delete interrupts property if interrupts-extended is set

[PATCH AUTOSEL 6.0 02/46] ARM: dts: imx6: delete interrupts property if interrupts-extended is set

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit c9d38ff7080b2c4fa6786b82210fa13115895aae ]

In most cases this is related to fsl,err006687-workaround-present, which
requires a GPIO interrupt next a GIC interrupt.

This fixes the dtbs_check warning:
imx6dl-mba6a.dtb: ethernet@2188000: More than one condition true in oneOf schema:
        {'$filename': 'Documentation/devicetree/bindings/net/fsl,fec.yaml',
[...]

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6dl-riotboard.dts        | 1 +
 arch/arm/boot/dts/imx6q-arm2.dts              | 1 +
 arch/arm/boot/dts/imx6q-evi.dts               | 1 +
 arch/arm/boot/dts/imx6q-mccmon6.dts           | 1 +
 arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi      | 1 +
 arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi  | 1 +
 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 1 +
 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi     | 1 +
 arch/arm/boot/dts/imx6qdl-sabreauto.dtsi      | 1 +
 arch/arm/boot/dts/imx6qdl-tqma6a.dtsi         | 1 +
 arch/arm/boot/dts/imx6qdl-ts7970.dtsi         | 1 +
 11 files changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index e7d9bfbfd0e4..e7be05f205d3 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -90,6 +90,7 @@ &fec {
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&rgmii_phy>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 0b40f52268b3..75586299d9ca 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -178,6 +178,7 @@ &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
index c63f371ede8b..78d941fef5df 100644
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -146,6 +146,7 @@ &fec {
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts
index 55692c73943d..64ab01018b71 100644
--- a/arch/arm/boot/dts/imx6q-mccmon6.dts
+++ b/arch/arm/boot/dts/imx6q-mccmon6.dts
@@ -100,6 +100,7 @@ &fec {
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index 0ad4cb4f1e82..a53a5d0766a5 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -192,6 +192,7 @@ &fec {
 	phy-mode = "rgmii";
 	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index beaa2dcd436c..57c21a01f126 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -334,6 +334,7 @@ &fec {
 	phy-mode = "rgmii";
 	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
index ee7e2371f94b..000e9dc97b1a 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -263,6 +263,7 @@ &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 904d5d051d63..731759bdd7f5 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -267,6 +267,7 @@ &fec {
 	phy-mode = "rgmii";
 	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 1368a4762037..3dbb460ef102 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -295,6 +295,7 @@ &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
index 7dc3f0005b0f..0a36e1bce375 100644
--- a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 &fec {
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
index d6ba4b2a60f6..c096d25a6f5b 100644
--- a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
@@ -192,6 +192,7 @@ &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 03/46] ARM: dts: imx7d-sdb: config the max pressure for tsc2046

[Sasha Levin]

From: Haibo Chen <haibo.chen@nxp.com>

[ Upstream commit e7c4ebe2f9cd68588eb24ba4ed122e696e2d5272 ]

Use the general touchscreen method to config the max pressure for
touch tsc2046(data sheet suggest 8 bit pressure), otherwise, for
ABS_PRESSURE, when config the same max and min value, weston will
meet the following issue,

[17:19:39.183] event1  - ADS7846 Touchscreen: is tagged by udev as: Touchscreen
[17:19:39.183] event1  - ADS7846 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE
[17:19:39.183] event1  - ADS7846 Touchscreen: was rejected
[17:19:39.183] event1  - not using input device '/dev/input/event1'

This will then cause the APP weston-touch-calibrator can't list touch devices.

root@imx6ul7d:~# weston-touch-calibrator
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
No devices listed.

And accroding to binding Doc, "ti,x-max", "ti,y-max", "ti,pressure-max"
belong to the deprecated properties, so remove them. Also for "ti,x-min",
"ti,y-min", "ti,x-plate-ohms", the value set in dts equal to the default
value in driver, so are redundant, also remove here.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx7d-sdb.dts | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 78f4224a9bf4..e93b9cd9c27b 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -206,12 +206,7 @@ tsc2046@0 {
 		interrupt-parent = <&gpio2>;
 		interrupts = <29 0>;
 		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-		ti,x-min = /bits/ 16 <0>;
-		ti,x-max = /bits/ 16 <0>;
-		ti,y-min = /bits/ 16 <0>;
-		ti,y-max = /bits/ 16 <0>;
-		ti,pressure-max = /bits/ 16 <0>;
-		ti,x-plate-ohms = /bits/ 16 <400>;
+		touchscreen-max-pressure = <255>;
 		wakeup-source;
 	};
 };
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 04/46] soc: mediatek: Let PMIC Wrapper and SCPSYS depend on OF

[Sasha Levin]

From: Jean Delvare <jdelvare@suse.de>

[ Upstream commit 2778caedb5667239823a29148dfc48b26a8b3c2a ]

With the following configuration options:
CONFIG_OF is not set
CONFIG_MTK_PMIC_WRAP=y
CONFIG_MTK_SCPSYS=y
we get the following build warnings:

  CC      drivers/soc/mediatek/mtk-pmic-wrap.o
drivers/soc/mediatek/mtk-pmic-wrap.c:2138:34: warning: ‘of_pwrap_match_tbl’ defined but not used [-Wunused-const-variable=]
drivers/soc/mediatek/mtk-pmic-wrap.c:1953:34: warning: ‘of_slave_match_tbl’ defined but not used [-Wunused-const-variable=]
  CC      drivers/soc/mediatek/mtk-scpsys.o
drivers/soc/mediatek/mtk-scpsys.c:1084:34: warning: ‘of_scpsys_match_tbl’ defined but not used [-Wunused-const-variable=]

Looking at the code, both drivers can only bind to OF-defined device
nodes, so these drivers are useless without OF and should therefore
depend on it.

Also drop of_match_ptr() from both drivers. We already know what it
will resolve to, so we might as well save cpp some work.

Developers or QA teams who wish to test-build the code can still do
so by enabling CONFIG_OF, which is available on all architectures and
has no dependencies.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202207240252.ZY5hSCNB-lkp@intel.com/
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Chenglin Xu <chenglin.xu@mediatek.com>
Link: https://lore.kernel.org/r/20220730144833.0a0d9825@endymion.delvare
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/mediatek/Kconfig         | 2 ++
 drivers/soc/mediatek/mtk-pmic-wrap.c | 2 +-
 drivers/soc/mediatek/mtk-scpsys.c    | 2 +-
 3 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
index 3c3eedea35f7..73e63920b1b9 100644
--- a/drivers/soc/mediatek/Kconfig
+++ b/drivers/soc/mediatek/Kconfig
@@ -37,6 +37,7 @@ config MTK_INFRACFG
 config MTK_PMIC_WRAP
 	tristate "MediaTek PMIC Wrapper Support"
 	depends on RESET_CONTROLLER
+	depends on OF
 	select REGMAP
 	help
 	  Say yes here to add support for MediaTek PMIC Wrapper found
@@ -46,6 +47,7 @@ config MTK_PMIC_WRAP
 config MTK_SCPSYS
 	bool "MediaTek SCPSYS Support"
 	default ARCH_MEDIATEK
+	depends on OF
 	select REGMAP
 	select MTK_INFRACFG
 	select PM_GENERIC_DOMAINS if PM
diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c
index d8cb0f833645..eb82ae06697f 100644
--- a/drivers/soc/mediatek/mtk-pmic-wrap.c
+++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
@@ -2316,7 +2316,7 @@ static int pwrap_probe(struct platform_device *pdev)
 static struct platform_driver pwrap_drv = {
 	.driver = {
 		.name = "mt-pmic-pwrap",
-		.of_match_table = of_match_ptr(of_pwrap_match_tbl),
+		.of_match_table = of_pwrap_match_tbl,
 	},
 	.probe = pwrap_probe,
 };
diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index ca75b14931ec..7a668888111c 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -1141,7 +1141,7 @@ static struct platform_driver scpsys_drv = {
 		.name = "mtk-scpsys",
 		.suppress_bind_attrs = true,
 		.owner = THIS_MODULE,
-		.of_match_table = of_match_ptr(of_scpsys_match_tbl),
+		.of_match_table = of_scpsys_match_tbl,
 	},
 };
 builtin_platform_driver(scpsys_drv);
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH AUTOSEL 6.0 04/46] soc: mediatek: Let PMIC Wrapper and SCPSYS depend on OF

[Jean Delvare]

Hi Sasha,

On Tue, 11 Oct 2022 10:49:32 -0400, Sasha Levin wrote:
> From: Jean Delvare <jdelvare@suse.de>
> 
> [ Upstream commit 2778caedb5667239823a29148dfc48b26a8b3c2a ]
> 
> With the following configuration options:
> CONFIG_OF is not set
> CONFIG_MTK_PMIC_WRAP=y
> CONFIG_MTK_SCPSYS=y
> we get the following build warnings:
> 
>   CC      drivers/soc/mediatek/mtk-pmic-wrap.o
> drivers/soc/mediatek/mtk-pmic-wrap.c:2138:34: warning: ‘of_pwrap_match_tbl’ defined but not used [-Wunused-const-variable=]
> drivers/soc/mediatek/mtk-pmic-wrap.c:1953:34: warning: ‘of_slave_match_tbl’ defined but not used [-Wunused-const-variable=]
>   CC      drivers/soc/mediatek/mtk-scpsys.o
> drivers/soc/mediatek/mtk-scpsys.c:1084:34: warning: ‘of_scpsys_match_tbl’ defined but not used [-Wunused-const-variable=]
> (...)

This is warning only, pretty harmless, so I don't think this qualifies
for stable kernel trees.

Thanks,
-- 
Jean Delvare
SUSE L3 Support

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH AUTOSEL 6.0 04/46] soc: mediatek: Let PMIC Wrapper and SCPSYS depend on OF

[Sasha Levin]

On Wed, Oct 12, 2022 at 12:49:49AM +0200, Jean Delvare wrote:
>Hi Sasha,
>
>On Tue, 11 Oct 2022 10:49:32 -0400, Sasha Levin wrote:
>> From: Jean Delvare <jdelvare@suse.de>
>>
>> [ Upstream commit 2778caedb5667239823a29148dfc48b26a8b3c2a ]
>>
>> With the following configuration options:
>> CONFIG_OF is not set
>> CONFIG_MTK_PMIC_WRAP=y
>> CONFIG_MTK_SCPSYS=y
>> we get the following build warnings:
>>
>>   CC      drivers/soc/mediatek/mtk-pmic-wrap.o
>> drivers/soc/mediatek/mtk-pmic-wrap.c:2138:34: warning: ‘of_pwrap_match_tbl’ defined but not used [-Wunused-const-variable=]
>> drivers/soc/mediatek/mtk-pmic-wrap.c:1953:34: warning: ‘of_slave_match_tbl’ defined but not used [-Wunused-const-variable=]
>>   CC      drivers/soc/mediatek/mtk-scpsys.o
>> drivers/soc/mediatek/mtk-scpsys.c:1084:34: warning: ‘of_scpsys_match_tbl’ defined but not used [-Wunused-const-variable=]
>> (...)
>
>This is warning only, pretty harmless, so I don't think this qualifies
>for stable kernel trees.

Ack, I can drop it.

-- 
Thanks,
Sasha

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 06/46] ARM: dts: imx6q: add missing properties for sram

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit b11d083c5dcec7c42fe982c854706d404ddd3a5f ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6q.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 3b77eae40e39..df86049a695b 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -163,6 +163,9 @@ soc: soc {
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x40000>;
+			ranges = <0 0x00900000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 07/46] ARM: dts: imx6dl: add missing properties for sram

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit f5848b95633d598bacf0500e0108dc5961af88c0 ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6dl.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 8e0ed209ede0..dc919e09a505 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -84,6 +84,9 @@ soc: soc {
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 08/46] ARM: dts: imx6qp: add missing properties for sram

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 088fe5237435ee2f7ed4450519b2ef58b94c832f ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@940000: '#address-cells' is a required property
sram@940000: '#size-cells' is a required property
sram@940000: 'ranges' is a required property

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6qp.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
index 050365513836..fc164991d2ae 100644
--- a/arch/arm/boot/dts/imx6qp.dtsi
+++ b/arch/arm/boot/dts/imx6qp.dtsi
@@ -9,12 +9,18 @@ soc {
 		ocram2: sram@940000 {
 			compatible = "mmio-sram";
 			reg = <0x00940000 0x20000>;
+			ranges = <0 0x00940000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
 		ocram3: sram@960000 {
 			compatible = "mmio-sram";
 			reg = <0x00960000 0x20000>;
+			ranges = <0 0x00960000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 09/46] ARM: dts: imx6sl: add missing properties for sram

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 60c9213a1d9941a8b33db570796c3f9be8984974 ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6sl.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 06a515121dfc..cfd6b4972ae7 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -115,6 +115,9 @@ soc {
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SL_CLK_OCRAM>;
 		};
 
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 10/46] ARM: dts: imx6sll: add missing properties for sram

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 7492a83ed9b7a151e2dd11d64b06da7a7f0fa7f9 ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6sll.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index d4a000c3dde7..2873369a57c0 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -115,6 +115,9 @@ soc {
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
 		intc: interrupt-controller@a01000 {
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 11/46] ARM: dts: imx6sx: add missing properties for sram

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 415432c008b2bce8138841356ba444631cabaa50 ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6sx.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 4d075e2bf749..2611eef3b2a2 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -164,12 +164,18 @@ soc: soc {
 		ocram_s: sram@8f8000 {
 			compatible = "mmio-sram";
 			reg = <0x008f8000 0x4000>;
+			ranges = <0 0x008f8000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM_S>;
 		};
 
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM>;
 		};
 
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 12/46] ARM: dts: imx6sl: use tabs for code indent

[Sasha Levin]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

[ Upstream commit 218db824a7519856d0eaaeb5c41ca504ed550210 ]

This fixes the following error:

arch/arm/boot/dts/imx6sl.dtsi:714: error: code indent should use tabs
where possible

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6sl.dtsi | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index cfd6b4972ae7..01122ddfdc0d 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -61,10 +61,10 @@ cpu0: cpu@0 {
 				<792000  1175000>,
 				<396000  975000>;
 			fsl,soc-operating-points =
-				/* ARM kHz      SOC-PU uV */
-				<996000         1225000>,
-				<792000         1175000>,
-				<396000         1175000>;
+				/* ARM kHz	SOC-PU uV */
+				<996000		1225000>,
+				<792000		1175000>,
+				<396000		1175000>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			#cooling-cells = <2>;
 			clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
@@ -225,7 +225,7 @@ ecspi4: spi@2014000 {
 
 				uart5: serial@2018000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02018000 0x4000>;
 					interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -238,7 +238,7 @@ uart5: serial@2018000 {
 
 				uart1: serial@2020000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02020000 0x4000>;
 					interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -251,7 +251,7 @@ uart1: serial@2020000 {
 
 				uart2: serial@2024000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02024000 0x4000>;
 					interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -312,7 +312,7 @@ ssi3: ssi@2030000 {
 
 				uart3: serial@2034000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02034000 0x4000>;
 					interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -325,7 +325,7 @@ uart3: serial@2034000 {
 
 				uart4: serial@2038000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02038000 0x4000>;
 					interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -714,7 +714,7 @@ pd_pu: power-domain@1 {
 						#power-domain-cells = <0>;
 						power-supply = <&reg_pu>;
 						clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
-						         <&clks IMX6SL_CLK_GPU2D_PODF>;
+							 <&clks IMX6SL_CLK_GPU2D_PODF>;
 					};
 
 					pd_disp: power-domain@2 {
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 13/46] ARM: dts: imx6sx-udoo-neo: don't use multiple blank lines

[Sasha Levin]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

[ Upstream commit fd2dd7077c7498765e7326c1b7f34bde85f1a975 ]

This fixes the following warning:

arch/arm/boot/dts/imx6sx-udoo-neo.dtsi:309: check: Please don't use multiple
blank lines

While at it, use tabs indent for some pinctrl entries.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
index 35861bbea94e..c84ea1fac5e9 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -226,7 +226,7 @@ lcdc: endpoint {
 &iomuxc {
 	pinctrl_bt_reg: btreggrp {
 		fsl,pins =
-			<MX6SX_PAD_KEY_ROW2__GPIO2_IO_17        0x15059>;
+			<MX6SX_PAD_KEY_ROW2__GPIO2_IO_17	0x15059>;
 	};
 
 	pinctrl_enet1: enet1grp {
@@ -306,7 +306,6 @@ MX6SX_PAD_LCD1_RESET__GPIO3_IO_27		0x4001b0b0
 		>;
 	};
 
-
 	pinctrl_uart1: uart1grp {
 		fsl,pins =
 			<MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1>,
@@ -347,24 +346,23 @@ pinctrl_uart6: uart6grp {
 
 	pinctrl_otg1_reg: otg1grp {
 		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9        0x10b0>;
+			<MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0>;
 	};
 
-
 	pinctrl_otg2_reg: otg2grp {
 		fsl,pins =
-			<MX6SX_PAD_NAND_RE_B__GPIO4_IO_12        0x10b0>;
+			<MX6SX_PAD_NAND_RE_B__GPIO4_IO_12	0x10b0>;
 	};
 
 	pinctrl_usb_otg1: usbotg1grp {
 		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID    0x17059>,
-			<MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC       0x10b0>;
+			<MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059>,
+			<MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC	0x10b0>;
 	};
 
 	pinctrl_usb_otg2: usbot2ggrp {
 		fsl,pins =
-			<MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC     0x10b0>;
+			<MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC	0x10b0>;
 	};
 
 	pinctrl_usdhc2: usdhc2grp {
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 14/46] kselftest/arm64: Fix validatation termination record after EXTRA_CONTEXT

[Sasha Levin]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 5c152c2f66f9368394b89ac90dc7483476ef7b88 ]

When arm64 signal context data overflows the base struct sigcontext it gets
placed in an extra buffer pointed to by a record of type EXTRA_CONTEXT in
the base struct sigcontext which is required to be the last record in the
base struct sigframe. The current validation code attempts to check this
by using GET_RESV_NEXT_HEAD() to step forward from the current record to
the next but that is a macro which assumes it is being provided with a
struct _aarch64_ctx and uses the size there to skip forward to the next
record. Instead validate_extra_context() passes it a struct extra_context
which has a separate size field. This compiles but results in us trying
to validate a termination record in completely the wrong place, at best
failing validation and at worst just segfaulting. Fix this by passing
the struct _aarch64_ctx we meant to into the macro.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/arm64/signal/testcases/testcases.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/arm64/signal/testcases/testcases.c b/tools/testing/selftests/arm64/signal/testcases/testcases.c
index 84c36bee4d82..d98828cb542b 100644
--- a/tools/testing/selftests/arm64/signal/testcases/testcases.c
+++ b/tools/testing/selftests/arm64/signal/testcases/testcases.c
@@ -33,7 +33,7 @@ bool validate_extra_context(struct extra_context *extra, char **err)
 		return false;
 
 	fprintf(stderr, "Validating EXTRA...\n");
-	term = GET_RESV_NEXT_HEAD(extra);
+	term = GET_RESV_NEXT_HEAD(&extra->head);
 	if (!term || term->magic || term->size) {
 		*err = "Missing terminator after EXTRA context";
 		return false;
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 15/46] kselftest/arm64: Allow larger buffers in get_signal_context()

[Sasha Levin]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 38150a6204c731a4846786682e500d132571fd82 ]

In order to allow testing of signal contexts that overflow the base signal
frame allow callers to pass the buffer size for the user context into
get_signal_context(). No functional change.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-10-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/arm64/signal/test_signals_utils.h    | 5 +++--
 .../arm64/signal/testcases/fake_sigreturn_bad_magic.c        | 2 +-
 .../arm64/signal/testcases/fake_sigreturn_bad_size.c         | 2 +-
 .../signal/testcases/fake_sigreturn_bad_size_for_magic0.c    | 2 +-
 .../signal/testcases/fake_sigreturn_duplicated_fpsimd.c      | 2 +-
 .../arm64/signal/testcases/fake_sigreturn_misaligned_sp.c    | 2 +-
 .../arm64/signal/testcases/fake_sigreturn_missing_fpsimd.c   | 2 +-
 .../arm64/signal/testcases/fake_sigreturn_sme_change_vl.c    | 2 +-
 .../arm64/signal/testcases/fake_sigreturn_sve_change_vl.c    | 2 +-
 tools/testing/selftests/arm64/signal/testcases/sme_vl.c      | 2 +-
 tools/testing/selftests/arm64/signal/testcases/ssve_regs.c   | 2 +-
 tools/testing/selftests/arm64/signal/testcases/sve_regs.c    | 2 +-
 tools/testing/selftests/arm64/signal/testcases/sve_vl.c      | 2 +-
 tools/testing/selftests/arm64/signal/testcases/za_regs.c     | 2 +-
 14 files changed, 16 insertions(+), 15 deletions(-)

diff --git a/tools/testing/selftests/arm64/signal/test_signals_utils.h b/tools/testing/selftests/arm64/signal/test_signals_utils.h
index f3aa99ba67bb..222093f51b67 100644
--- a/tools/testing/selftests/arm64/signal/test_signals_utils.h
+++ b/tools/testing/selftests/arm64/signal/test_signals_utils.h
@@ -56,7 +56,8 @@ static inline bool feats_ok(struct tdescr *td)
  * at sizeof(ucontext_t).
  */
 static __always_inline bool get_current_context(struct tdescr *td,
-						ucontext_t *dest_uc)
+						ucontext_t *dest_uc,
+						size_t dest_sz)
 {
 	static volatile bool seen_already;
 
@@ -64,7 +65,7 @@ static __always_inline bool get_current_context(struct tdescr *td,
 	/* it's a genuine invocation..reinit */
 	seen_already = 0;
 	td->live_uc_valid = 0;
-	td->live_sz = sizeof(*dest_uc);
+	td->live_sz = dest_sz;
 	memset(dest_uc, 0x00, td->live_sz);
 	td->live_uc = dest_uc;
 	/*
diff --git a/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_bad_magic.c b/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_bad_magic.c
index 8dc600a7d4fd..8c7f00ea9823 100644
--- a/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_bad_magic.c
+++ b/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_bad_magic.c
@@ -21,7 +21,7 @@ static int fake_sigreturn_bad_magic_run(struct tdescr *td,
 	struct _aarch64_ctx *shead = GET_SF_RESV_HEAD(sf), *head;
 
 	/* just to fill the ucontext_t with something real */
-	if (!get_current_context(td, &sf.uc))
+	if (!get_current_context(td, &sf.uc, sizeof(sf.uc)))
 		return 1;
 
 	/* need at least 2*HDR_SZ space: KSFT_BAD_MAGIC + terminator. */
diff --git a/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_bad_size.c b/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_bad_size.c
index b3c362100666..1c03f6b638e0 100644
--- a/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_bad_size.c
+++ b/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_bad_size.c
@@ -24,7 +24,7 @@ static int fake_sigreturn_bad_size_run(struct tdescr *td,
 	struct _aarch64_ctx *shead = GET_SF_RESV_HEAD(sf), *head;
 
 	/* just to fill the ucontext_t with something real */
-	if (!get_current_context(td, &sf.uc))
+	if (!get_current_context(td, &sf.uc, sizeof(sf.uc)))
 		return 1;
 
 	resv_sz = GET_SF_RESV_SIZE(sf);
diff --git a/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_bad_size_for_magic0.c b/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_bad_size_for_magic0.c
index a44b88bfc81a..bc22f64b544e 100644
--- a/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_bad_size_for_magic0.c
+++ b/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_bad_size_for_magic0.c
@@ -21,7 +21,7 @@ static int fake_sigreturn_bad_size_for_magic0_run(struct tdescr *td,
 	struct _aarch64_ctx *shead = GET_SF_RESV_HEAD(sf), *head;
 
 	/* just to fill the ucontext_t with something real */
-	if (!get_current_context(td, &sf.uc))
+	if (!get_current_context(td, &sf.uc, sizeof(sf.uc)))
 		return 1;
 
 	/* at least HDR_SZ for the badly sized terminator. */
diff --git a/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_duplicated_fpsimd.c b/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_duplicated_fpsimd.c
index afe8915f0998..63e3906b631c 100644
--- a/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_duplicated_fpsimd.c
+++ b/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_duplicated_fpsimd.c
@@ -21,7 +21,7 @@ static int fake_sigreturn_duplicated_fpsimd_run(struct tdescr *td,
 	struct _aarch64_ctx *shead = GET_SF_RESV_HEAD(sf), *head;
 
 	/* just to fill the ucontext_t with something real */
-	if (!get_current_context(td, &sf.uc))
+	if (!get_current_context(td, &sf.uc, sizeof(sf.uc)))
 		return 1;
 
 	head = get_starting_head(shead, sizeof(struct fpsimd_context) + HDR_SZ,
diff --git a/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_misaligned_sp.c b/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_misaligned_sp.c
index 1e089e66f9f3..d00625ff12c2 100644
--- a/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_misaligned_sp.c
+++ b/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_misaligned_sp.c
@@ -19,7 +19,7 @@ static int fake_sigreturn_misaligned_run(struct tdescr *td,
 					 siginfo_t *si, ucontext_t *uc)
 {
 	/* just to fill the ucontext_t with something real */
-	if (!get_current_context(td, &sf.uc))
+	if (!get_current_context(td, &sf.uc, sizeof(sf.uc)))
 		return 1;
 
 	/* Forcing sigframe on misaligned SP (16 + 3) */
diff --git a/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_missing_fpsimd.c b/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_missing_fpsimd.c
index 08ecd8073a1a..f805138cb20d 100644
--- a/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_missing_fpsimd.c
+++ b/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_missing_fpsimd.c
@@ -23,7 +23,7 @@ static int fake_sigreturn_missing_fpsimd_run(struct tdescr *td,
 	struct _aarch64_ctx *head = GET_SF_RESV_HEAD(sf);
 
 	/* just to fill the ucontext_t with something real */
-	if (!get_current_context(td, &sf.uc))
+	if (!get_current_context(td, &sf.uc, sizeof(sf.uc)))
 		return 1;
 
 	resv_sz = GET_SF_RESV_SIZE(sf);
diff --git a/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_sme_change_vl.c b/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_sme_change_vl.c
index 7ed762b7202f..ebd5815b54bb 100644
--- a/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_sme_change_vl.c
+++ b/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_sme_change_vl.c
@@ -54,7 +54,7 @@ static int fake_sigreturn_ssve_change_vl(struct tdescr *td,
 	struct sve_context *sve;
 
 	/* Get a signal context with a SME ZA frame in it */
-	if (!get_current_context(td, &sf.uc))
+	if (!get_current_context(td, &sf.uc, sizeof(sf.uc)))
 		return 1;
 
 	resv_sz = GET_SF_RESV_SIZE(sf);
diff --git a/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_sve_change_vl.c b/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_sve_change_vl.c
index 915821375b0a..e2a452190511 100644
--- a/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_sve_change_vl.c
+++ b/tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_sve_change_vl.c
@@ -56,7 +56,7 @@ static int fake_sigreturn_sve_change_vl(struct tdescr *td,
 	struct sve_context *sve;
 
 	/* Get a signal context with a SVE frame in it */
-	if (!get_current_context(td, &sf.uc))
+	if (!get_current_context(td, &sf.uc, sizeof(sf.uc)))
 		return 1;
 
 	resv_sz = GET_SF_RESV_SIZE(sf);
diff --git a/tools/testing/selftests/arm64/signal/testcases/sme_vl.c b/tools/testing/selftests/arm64/signal/testcases/sme_vl.c
index 13ff3b35cbaf..75f387f2db81 100644
--- a/tools/testing/selftests/arm64/signal/testcases/sme_vl.c
+++ b/tools/testing/selftests/arm64/signal/testcases/sme_vl.c
@@ -34,7 +34,7 @@ static int sme_vl(struct tdescr *td, siginfo_t *si, ucontext_t *uc)
 	struct za_context *za;
 
 	/* Get a signal context which should have a ZA frame in it */
-	if (!get_current_context(td, &sf.uc))
+	if (!get_current_context(td, &sf.uc, sizeof(sf.uc)))
 		return 1;
 
 	resv_sz = GET_SF_RESV_SIZE(sf);
diff --git a/tools/testing/selftests/arm64/signal/testcases/ssve_regs.c b/tools/testing/selftests/arm64/signal/testcases/ssve_regs.c
index 9022a6cab4b3..71f14632c524 100644
--- a/tools/testing/selftests/arm64/signal/testcases/ssve_regs.c
+++ b/tools/testing/selftests/arm64/signal/testcases/ssve_regs.c
@@ -73,7 +73,7 @@ static int do_one_sme_vl(struct tdescr *td, siginfo_t *si, ucontext_t *uc,
 	 * in it.
 	 */
 	setup_ssve_regs();
-	if (!get_current_context(td, &sf.uc))
+	if (!get_current_context(td, &sf.uc, sizeof(sf.uc)))
 		return 1;
 
 	resv_sz = GET_SF_RESV_SIZE(sf);
diff --git a/tools/testing/selftests/arm64/signal/testcases/sve_regs.c b/tools/testing/selftests/arm64/signal/testcases/sve_regs.c
index 4b2418aa08a9..4cdedb706786 100644
--- a/tools/testing/selftests/arm64/signal/testcases/sve_regs.c
+++ b/tools/testing/selftests/arm64/signal/testcases/sve_regs.c
@@ -71,7 +71,7 @@ static int do_one_sve_vl(struct tdescr *td, siginfo_t *si, ucontext_t *uc,
 	 * in it.
 	 */
 	setup_sve_regs();
-	if (!get_current_context(td, &sf.uc))
+	if (!get_current_context(td, &sf.uc, sizeof(sf.uc)))
 		return 1;
 
 	resv_sz = GET_SF_RESV_SIZE(sf);
diff --git a/tools/testing/selftests/arm64/signal/testcases/sve_vl.c b/tools/testing/selftests/arm64/signal/testcases/sve_vl.c
index 92904653add1..aa835acec062 100644
--- a/tools/testing/selftests/arm64/signal/testcases/sve_vl.c
+++ b/tools/testing/selftests/arm64/signal/testcases/sve_vl.c
@@ -34,7 +34,7 @@ static int sve_vl(struct tdescr *td, siginfo_t *si, ucontext_t *uc)
 	struct sve_context *sve;
 
 	/* Get a signal context which should have a SVE frame in it */
-	if (!get_current_context(td, &sf.uc))
+	if (!get_current_context(td, &sf.uc, sizeof(sf.uc)))
 		return 1;
 
 	resv_sz = GET_SF_RESV_SIZE(sf);
diff --git a/tools/testing/selftests/arm64/signal/testcases/za_regs.c b/tools/testing/selftests/arm64/signal/testcases/za_regs.c
index b94e4f99fcac..70c00ca6eded 100644
--- a/tools/testing/selftests/arm64/signal/testcases/za_regs.c
+++ b/tools/testing/selftests/arm64/signal/testcases/za_regs.c
@@ -71,7 +71,7 @@ static int do_one_sme_vl(struct tdescr *td, siginfo_t *si, ucontext_t *uc,
 	 * in it.
 	 */
 	setup_za_regs();
-	if (!get_current_context(td, &sf.uc))
+	if (!get_current_context(td, &sf.uc, sizeof(sf.uc)))
 		return 1;
 
 	resv_sz = GET_SF_RESV_SIZE(sf);
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH AUTOSEL 6.0 15/46] kselftest/arm64: Allow larger buffers in get_signal_context()

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 480 bytes --]

On Tue, Oct 11, 2022 at 10:49:43AM -0400, Sasha Levin wrote:
> From: Mark Brown <broonie@kernel.org>
> 
> [ Upstream commit 38150a6204c731a4846786682e500d132571fd82 ]
> 
> In order to allow testing of signal contexts that overflow the base signal
> frame allow callers to pass the buffer size for the user context into
> get_signal_context(). No functional change.

This doesn't obviously make sense independently, even by the relaxed
standards stable uses these days?

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH AUTOSEL 6.0 15/46] kselftest/arm64: Allow larger buffers in get_signal_context()

[Sasha Levin]

On Tue, Oct 11, 2022 at 04:04:42PM +0100, Mark Brown wrote:
>On Tue, Oct 11, 2022 at 10:49:43AM -0400, Sasha Levin wrote:
>> From: Mark Brown <broonie@kernel.org>
>>
>> [ Upstream commit 38150a6204c731a4846786682e500d132571fd82 ]
>>
>> In order to allow testing of signal contexts that overflow the base signal
>> frame allow callers to pass the buffer size for the user context into
>> get_signal_context(). No functional change.
>
>This doesn't obviously make sense independently, even by the relaxed
>standards stable uses these days?

I can drop this one, or, are there maybe additional patches we do want
to take?

-- 
Thanks,
Sasha

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH AUTOSEL 6.0 15/46] kselftest/arm64: Allow larger buffers in get_signal_context()

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 712 bytes --]

On Thu, Oct 13, 2022 at 01:58:30PM -0400, Sasha Levin wrote:
> On Tue, Oct 11, 2022 at 04:04:42PM +0100, Mark Brown wrote:
> > On Tue, Oct 11, 2022 at 10:49:43AM -0400, Sasha Levin wrote:
> > > From: Mark Brown <broonie@kernel.org>

> > > In order to allow testing of signal contexts that overflow the base signal
> > > frame allow callers to pass the buffer size for the user context into
> > > get_signal_context(). No functional change.

> > This doesn't obviously make sense independently, even by the relaxed
> > standards stable uses these days?

> I can drop this one, or, are there maybe additional patches we do want
> to take?

Unless you're going to start backporting extra tests as well I'd drop
it.

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 17/46] arm64: atomics: remove LL/SC trampolines

[Sasha Levin]

From: Mark Rutland <mark.rutland@arm.com>

[ Upstream commit b2c3ccbd0011bb3b51d0fec24cb3a5812b1ec8ea ]

When CONFIG_ARM64_LSE_ATOMICS=y, each use of an LL/SC atomic results in
a fragment of code being generated in a subsection without a clear
association with its caller. A trampoline in the caller branches to the
LL/SC atomic with with a direct branch, and the atomic directly branches
back into its trampoline.

This breaks backtracing, as any PC within the out-of-line fragment will
be symbolized as an offset from the nearest prior symbol (which may not
be the function using the atomic), and since the atomic returns with a
direct branch, the caller's PC may be missing from the backtrace.

For example, with secondary_start_kernel() hacked to contain
atomic_inc(NULL), the resulting exception can be reported as being taken
from cpus_are_stuck_in_kernel():

| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
| Mem abort info:
|   ESR = 0x0000000096000004
|   EC = 0x25: DABT (current EL), IL = 32 bits
|   SET = 0, FnV = 0
|   EA = 0, S1PTW = 0
|   FSC = 0x04: level 0 translation fault
| Data abort info:
|   ISV = 0, ISS = 0x00000004
|   CM = 0, WnR = 0
| [0000000000000000] user address but active_mm is swapper
| Internal error: Oops: 96000004 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.19.0-11219-geb555cb5b794-dirty #3
| Hardware name: linux,dummy-virt (DT)
| pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : cpus_are_stuck_in_kernel+0xa4/0x120
| lr : secondary_start_kernel+0x164/0x170
| sp : ffff80000a4cbe90
| x29: ffff80000a4cbe90 x28: 0000000000000000 x27: 0000000000000000
| x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
| x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
| x20: 0000000000000001 x19: 0000000000000001 x18: 0000000000000008
| x17: 3030383832343030 x16: 3030303030307830 x15: ffff80000a4cbab0
| x14: 0000000000000001 x13: 5d31666130663133 x12: 3478305b20313030
| x11: 3030303030303078 x10: 3020726f73736563 x9 : 726f737365636f72
| x8 : ffff800009ff2ef0 x7 : 0000000000000003 x6 : 0000000000000000
| x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000100
| x2 : 0000000000000000 x1 : ffff0000029bd880 x0 : 0000000000000000
| Call trace:
|  cpus_are_stuck_in_kernel+0xa4/0x120
|  __secondary_switched+0xb0/0xb4
| Code: 35ffffa3 17fffc6c d53cd040 f9800011 (885f7c01)
| ---[ end trace 0000000000000000 ]---

This is confusing and hinders debugging, and will be problematic for
CONFIG_LIVEPATCH as these cases cannot be unwound reliably.

This is very similar to recent issues with out-of-line exception fixups,
which were removed in commits:

  35d67794b8828333 ("arm64: lib: __arch_clear_user(): fold fixups into body")
  4012e0e22739eef9 ("arm64: lib: __arch_copy_from_user(): fold fixups into body")
  139f9ab73d60cf76 ("arm64: lib: __arch_copy_to_user(): fold fixups into body")

When the trampolines were introduced in commit:

  addfc38672c73efd ("arm64: atomics: avoid out-of-line ll/sc atomics")

The rationale was to improve icache performance by grouping the LL/SC
atomics together. This has never been measured, and this theoretical
benefit is outweighed by other factors:

* As the subsections are collapsed into sections at object file
  granularity, these are spread out throughout the kernel and can share
  cachelines with unrelated code regardless.

* GCC 12.1.0 has been observed to place the trampoline out-of-line in
  specialised __ll_sc_*() functions, introducing more branching than was
  intended.

* Removing the trampolines has been observed to shrink a defconfig
  kernel Image by 64KiB when building with GCC 12.1.0.

This patch removes the LL/SC trampolines, meaning that the LL/SC atomics
will be inlined into their callers (or placed in out-of line functions
using regular BL/RET pairs). When CONFIG_ARM64_LSE_ATOMICS=y, the LL/SC
atomics are always called in an unlikely branch, and will be placed in a
cold portion of the function, so this should have minimal impact to the
hot paths.

Other than the improved backtracing, there should be no functional
change as a result of this patch.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220817155914.3975112-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/atomic_ll_sc.h | 40 ++++++---------------------
 1 file changed, 9 insertions(+), 31 deletions(-)

diff --git a/arch/arm64/include/asm/atomic_ll_sc.h b/arch/arm64/include/asm/atomic_ll_sc.h
index fe0db8d416fb..906e2d8c254c 100644
--- a/arch/arm64/include/asm/atomic_ll_sc.h
+++ b/arch/arm64/include/asm/atomic_ll_sc.h
@@ -12,19 +12,6 @@
 
 #include <linux/stringify.h>
 
-#ifdef CONFIG_ARM64_LSE_ATOMICS
-#define __LL_SC_FALLBACK(asm_ops)					\
-"	b	3f\n"							\
-"	.subsection	1\n"						\
-"3:\n"									\
-asm_ops "\n"								\
-"	b	4f\n"							\
-"	.previous\n"							\
-"4:\n"
-#else
-#define __LL_SC_FALLBACK(asm_ops) asm_ops
-#endif
-
 #ifndef CONFIG_CC_HAS_K_CONSTRAINT
 #define K
 #endif
@@ -43,12 +30,11 @@ __ll_sc_atomic_##op(int i, atomic_t *v)					\
 	int result;							\
 									\
 	asm volatile("// atomic_" #op "\n"				\
-	__LL_SC_FALLBACK(						\
 	"	prfm	pstl1strm, %2\n"				\
 	"1:	ldxr	%w0, %2\n"					\
 	"	" #asm_op "	%w0, %w0, %w3\n"			\
 	"	stxr	%w1, %w0, %2\n"					\
-	"	cbnz	%w1, 1b\n")					\
+	"	cbnz	%w1, 1b\n"					\
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)		\
 	: __stringify(constraint) "r" (i));				\
 }
@@ -61,13 +47,12 @@ __ll_sc_atomic_##op##_return##name(int i, atomic_t *v)			\
 	int result;							\
 									\
 	asm volatile("// atomic_" #op "_return" #name "\n"		\
-	__LL_SC_FALLBACK(						\
 	"	prfm	pstl1strm, %2\n"				\
 	"1:	ld" #acq "xr	%w0, %2\n"				\
 	"	" #asm_op "	%w0, %w0, %w3\n"			\
 	"	st" #rel "xr	%w1, %w0, %2\n"				\
 	"	cbnz	%w1, 1b\n"					\
-	"	" #mb )							\
+	"	" #mb							\
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)		\
 	: __stringify(constraint) "r" (i)				\
 	: cl);								\
@@ -83,13 +68,12 @@ __ll_sc_atomic_fetch_##op##name(int i, atomic_t *v)			\
 	int val, result;						\
 									\
 	asm volatile("// atomic_fetch_" #op #name "\n"			\
-	__LL_SC_FALLBACK(						\
 	"	prfm	pstl1strm, %3\n"				\
 	"1:	ld" #acq "xr	%w0, %3\n"				\
 	"	" #asm_op "	%w1, %w0, %w4\n"			\
 	"	st" #rel "xr	%w2, %w1, %3\n"				\
 	"	cbnz	%w2, 1b\n"					\
-	"	" #mb )							\
+	"	" #mb							\
 	: "=&r" (result), "=&r" (val), "=&r" (tmp), "+Q" (v->counter)	\
 	: __stringify(constraint) "r" (i)				\
 	: cl);								\
@@ -142,12 +126,11 @@ __ll_sc_atomic64_##op(s64 i, atomic64_t *v)				\
 	unsigned long tmp;						\
 									\
 	asm volatile("// atomic64_" #op "\n"				\
-	__LL_SC_FALLBACK(						\
 	"	prfm	pstl1strm, %2\n"				\
 	"1:	ldxr	%0, %2\n"					\
 	"	" #asm_op "	%0, %0, %3\n"				\
 	"	stxr	%w1, %0, %2\n"					\
-	"	cbnz	%w1, 1b")					\
+	"	cbnz	%w1, 1b"					\
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)		\
 	: __stringify(constraint) "r" (i));				\
 }
@@ -160,13 +143,12 @@ __ll_sc_atomic64_##op##_return##name(s64 i, atomic64_t *v)		\
 	unsigned long tmp;						\
 									\
 	asm volatile("// atomic64_" #op "_return" #name "\n"		\
-	__LL_SC_FALLBACK(						\
 	"	prfm	pstl1strm, %2\n"				\
 	"1:	ld" #acq "xr	%0, %2\n"				\
 	"	" #asm_op "	%0, %0, %3\n"				\
 	"	st" #rel "xr	%w1, %0, %2\n"				\
 	"	cbnz	%w1, 1b\n"					\
-	"	" #mb )							\
+	"	" #mb							\
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)		\
 	: __stringify(constraint) "r" (i)				\
 	: cl);								\
@@ -182,13 +164,12 @@ __ll_sc_atomic64_fetch_##op##name(s64 i, atomic64_t *v)			\
 	unsigned long tmp;						\
 									\
 	asm volatile("// atomic64_fetch_" #op #name "\n"		\
-	__LL_SC_FALLBACK(						\
 	"	prfm	pstl1strm, %3\n"				\
 	"1:	ld" #acq "xr	%0, %3\n"				\
 	"	" #asm_op "	%1, %0, %4\n"				\
 	"	st" #rel "xr	%w2, %1, %3\n"				\
 	"	cbnz	%w2, 1b\n"					\
-	"	" #mb )							\
+	"	" #mb							\
 	: "=&r" (result), "=&r" (val), "=&r" (tmp), "+Q" (v->counter)	\
 	: __stringify(constraint) "r" (i)				\
 	: cl);								\
@@ -240,7 +221,6 @@ __ll_sc_atomic64_dec_if_positive(atomic64_t *v)
 	unsigned long tmp;
 
 	asm volatile("// atomic64_dec_if_positive\n"
-	__LL_SC_FALLBACK(
 	"	prfm	pstl1strm, %2\n"
 	"1:	ldxr	%0, %2\n"
 	"	subs	%0, %0, #1\n"
@@ -248,7 +228,7 @@ __ll_sc_atomic64_dec_if_positive(atomic64_t *v)
 	"	stlxr	%w1, %0, %2\n"
 	"	cbnz	%w1, 1b\n"
 	"	dmb	ish\n"
-	"2:")
+	"2:"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
 	:
 	: "cc", "memory");
@@ -274,7 +254,6 @@ __ll_sc__cmpxchg_case_##name##sz(volatile void *ptr,			\
 		old = (u##sz)old;					\
 									\
 	asm volatile(							\
-	__LL_SC_FALLBACK(						\
 	"	prfm	pstl1strm, %[v]\n"				\
 	"1:	ld" #acq "xr" #sfx "\t%" #w "[oldval], %[v]\n"		\
 	"	eor	%" #w "[tmp], %" #w "[oldval], %" #w "[old]\n"	\
@@ -282,7 +261,7 @@ __ll_sc__cmpxchg_case_##name##sz(volatile void *ptr,			\
 	"	st" #rel "xr" #sfx "\t%w[tmp], %" #w "[new], %[v]\n"	\
 	"	cbnz	%w[tmp], 1b\n"					\
 	"	" #mb "\n"						\
-	"2:")								\
+	"2:"								\
 	: [tmp] "=&r" (tmp), [oldval] "=&r" (oldval),			\
 	  [v] "+Q" (*(u##sz *)ptr)					\
 	: [old] __stringify(constraint) "r" (old), [new] "r" (new)	\
@@ -326,7 +305,6 @@ __ll_sc__cmpxchg_double##name(unsigned long old1,			\
 	unsigned long tmp, ret;						\
 									\
 	asm volatile("// __cmpxchg_double" #name "\n"			\
-	__LL_SC_FALLBACK(						\
 	"	prfm	pstl1strm, %2\n"				\
 	"1:	ldxp	%0, %1, %2\n"					\
 	"	eor	%0, %0, %3\n"					\
@@ -336,7 +314,7 @@ __ll_sc__cmpxchg_double##name(unsigned long old1,			\
 	"	st" #rel "xp	%w0, %5, %6, %2\n"			\
 	"	cbnz	%w0, 1b\n"					\
 	"	" #mb "\n"						\
-	"2:")								\
+	"2:"								\
 	: "=&r" (tmp), "=&r" (ret), "+Q" (*(unsigned long *)ptr)	\
 	: "r" (old1), "r" (old2), "r" (new1), "r" (new2)		\
 	: cl);								\
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH AUTOSEL 6.0 17/46] arm64: atomics: remove LL/SC trampolines

[Catalin Marinas]

On Tue, Oct 11, 2022 at 10:49:45AM -0400, Sasha Levin wrote:
> From: Mark Rutland <mark.rutland@arm.com>
> 
> [ Upstream commit b2c3ccbd0011bb3b51d0fec24cb3a5812b1ec8ea ]
> 
> When CONFIG_ARM64_LSE_ATOMICS=y, each use of an LL/SC atomic results in
> a fragment of code being generated in a subsection without a clear
> association with its caller. A trampoline in the caller branches to the
> LL/SC atomic with with a direct branch, and the atomic directly branches
> back into its trampoline.
> 
> This breaks backtracing, as any PC within the out-of-line fragment will
> be symbolized as an offset from the nearest prior symbol (which may not
> be the function using the atomic), and since the atomic returns with a
> direct branch, the caller's PC may be missing from the backtrace.
> 
> For example, with secondary_start_kernel() hacked to contain
> atomic_inc(NULL), the resulting exception can be reported as being taken
> from cpus_are_stuck_in_kernel():
> 
> | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
> | Mem abort info:
> |   ESR = 0x0000000096000004
> |   EC = 0x25: DABT (current EL), IL = 32 bits
> |   SET = 0, FnV = 0
> |   EA = 0, S1PTW = 0
> |   FSC = 0x04: level 0 translation fault
> | Data abort info:
> |   ISV = 0, ISS = 0x00000004
> |   CM = 0, WnR = 0
> | [0000000000000000] user address but active_mm is swapper
> | Internal error: Oops: 96000004 [#1] PREEMPT SMP
> | Modules linked in:
> | CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.19.0-11219-geb555cb5b794-dirty #3
> | Hardware name: linux,dummy-virt (DT)
> | pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> | pc : cpus_are_stuck_in_kernel+0xa4/0x120
> | lr : secondary_start_kernel+0x164/0x170
> | sp : ffff80000a4cbe90
> | x29: ffff80000a4cbe90 x28: 0000000000000000 x27: 0000000000000000
> | x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
> | x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
> | x20: 0000000000000001 x19: 0000000000000001 x18: 0000000000000008
> | x17: 3030383832343030 x16: 3030303030307830 x15: ffff80000a4cbab0
> | x14: 0000000000000001 x13: 5d31666130663133 x12: 3478305b20313030
> | x11: 3030303030303078 x10: 3020726f73736563 x9 : 726f737365636f72
> | x8 : ffff800009ff2ef0 x7 : 0000000000000003 x6 : 0000000000000000
> | x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000100
> | x2 : 0000000000000000 x1 : ffff0000029bd880 x0 : 0000000000000000
> | Call trace:
> |  cpus_are_stuck_in_kernel+0xa4/0x120
> |  __secondary_switched+0xb0/0xb4
> | Code: 35ffffa3 17fffc6c d53cd040 f9800011 (885f7c01)
> | ---[ end trace 0000000000000000 ]---
> 
> This is confusing and hinders debugging, and will be problematic for
> CONFIG_LIVEPATCH as these cases cannot be unwound reliably.
> 
> This is very similar to recent issues with out-of-line exception fixups,
> which were removed in commits:
> 
>   35d67794b8828333 ("arm64: lib: __arch_clear_user(): fold fixups into body")
>   4012e0e22739eef9 ("arm64: lib: __arch_copy_from_user(): fold fixups into body")
>   139f9ab73d60cf76 ("arm64: lib: __arch_copy_to_user(): fold fixups into body")
> 
> When the trampolines were introduced in commit:
> 
>   addfc38672c73efd ("arm64: atomics: avoid out-of-line ll/sc atomics")
> 
> The rationale was to improve icache performance by grouping the LL/SC
> atomics together. This has never been measured, and this theoretical
> benefit is outweighed by other factors:
> 
> * As the subsections are collapsed into sections at object file
>   granularity, these are spread out throughout the kernel and can share
>   cachelines with unrelated code regardless.
> 
> * GCC 12.1.0 has been observed to place the trampoline out-of-line in
>   specialised __ll_sc_*() functions, introducing more branching than was
>   intended.
> 
> * Removing the trampolines has been observed to shrink a defconfig
>   kernel Image by 64KiB when building with GCC 12.1.0.
> 
> This patch removes the LL/SC trampolines, meaning that the LL/SC atomics
> will be inlined into their callers (or placed in out-of line functions
> using regular BL/RET pairs). When CONFIG_ARM64_LSE_ATOMICS=y, the LL/SC
> atomics are always called in an unlikely branch, and will be placed in a
> cold portion of the function, so this should have minimal impact to the
> hot paths.
> 
> Other than the improved backtracing, there should be no functional
> change as a result of this patch.
> 
> Signed-off-by: Mark Rutland <mark.rutland@arm.com>
> Cc: Will Deacon <will@kernel.org>
> Link: https://lore.kernel.org/r/20220817155914.3975112-2-mark.rutland@arm.com
> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

Please also drop this here. Thanks.

-- 
Catalin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 18/46] arm64: run softirqs on the per-CPU IRQ stack

[Sasha Levin]

From: Qi Zheng <zhengqi.arch@bytedance.com>

[ Upstream commit 8eb858c44b98e0326bb32fca34ae671995cd73bb ]

Currently arm64 supports per-CPU IRQ stack, but softirqs
are still handled in the task context.

Since any call to local_bh_enable() at any level in the task's
call stack may trigger a softirq processing run, which could
potentially cause a task stack overflow if the combined stack
footprints exceed the stack's size, let's run these softirqs
on the IRQ stack as well.

Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220815124739.15948-1-zhengqi.arch@bytedance.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/Kconfig      |  1 +
 arch/arm64/kernel/irq.c | 14 ++++++++++++++
 2 files changed, 15 insertions(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 1ce7685ad5de..68ee7146bdb9 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -230,6 +230,7 @@ config ARM64
 	select HAVE_ARCH_USERFAULTFD_MINOR if USERFAULTFD
 	select TRACE_IRQFLAGS_SUPPORT
 	select TRACE_IRQFLAGS_NMI_SUPPORT
+	select HAVE_SOFTIRQ_ON_OWN_STACK
 	help
 	  ARM 64-bit (AArch64) Linux support.
 
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
index bda49430c9ea..38dbd3828f13 100644
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -21,7 +21,9 @@
 #include <linux/seq_file.h>
 #include <linux/vmalloc.h>
 #include <asm/daifflags.h>
+#include <asm/exception.h>
 #include <asm/vmap_stack.h>
+#include <asm/softirq_stack.h>
 
 /* Only access this in an NMI enter/exit */
 DEFINE_PER_CPU(struct nmi_ctx, nmi_contexts);
@@ -71,6 +73,18 @@ static void init_irq_stacks(void)
 }
 #endif
 
+#ifndef CONFIG_PREEMPT_RT
+static void ____do_softirq(struct pt_regs *regs)
+{
+	__do_softirq();
+}
+
+void do_softirq_own_stack(void)
+{
+	call_on_irq_stack(NULL, ____do_softirq);
+}
+#endif
+
 static void default_handle_irq(struct pt_regs *regs)
 {
 	panic("IRQ taken without a root IRQ handler\n");
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 19/46] arm64: dts: imx8mm-kontron: Use the VSELECT signal to switch SD card IO voltage

[Sasha Levin]

From: Frieder Schrempf <frieder.schrempf@kontron.de>

[ Upstream commit eef2c0217e02b6c7ed5b10b82ea944127145e113 ]

It turns out that it is not necessary to declare the VSELECT signal as
GPIO and let the PMIC driver set it to a fixed high level. This switches
the voltage between 3.3V and 1.8V by setting the PMIC register for LDO5
accordingly.

Instead we can do it like other boards already do and simply mux the
VSELECT signal of the USDHC interface to the pin. This makes sure that
the correct voltage is selected by setting the PMIC's SD_VSEL input
to high or low accordingly.

Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts    | 3 +++
 arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi | 2 --
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
index 23be1ec538ba..c54536c0a2ba 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
@@ -321,6 +321,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
 			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
 		>;
 	};
 
@@ -333,6 +334,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
 			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
 		>;
 	};
 
@@ -345,6 +347,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
 			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
 		>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
index 8f90eb02550d..6307af803429 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
@@ -86,7 +86,6 @@ pca9450: pmic@25 {
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 
 		regulators {
 			reg_vdd_soc: BUCK1 {
@@ -229,7 +228,6 @@ MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
 	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x141
-			MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4		0x141
 		>;
 	};
 
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 20/46] arm64: dts: imx8ulp: no executable source file permission

[Sasha Levin]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

[ Upstream commit 7db9905d48e1b9a97a28224c5a201262ebce7489 ]

This fixes the following error:

arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h: error: do not set
 execute permissions for source files

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h | 0
 1 file changed, 0 insertions(+), 0 deletions(-)
 mode change 100755 => 100644 arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h

diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h
old mode 100755
new mode 100644
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 21/46] arm64: dts: imx8mq-librem5: Add bq25895 as max17055's power supply

[Sasha Levin]

From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>

[ Upstream commit 6effe295e1a87408033c29dbcea9d5a5c8b937d5 ]

This allows the userspace to notice that there's not enough
current provided to charge the battery, and also fixes issues
with 0% SOC values being considered invalid.

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 9eec8a7eecfc..127fc7f904c8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -1077,6 +1077,7 @@ bat: fuel-gauge@36 {
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gauge>;
+		power-supplies = <&bq25895>;
 		maxim,over-heat-temp = <700>;
 		maxim,over-volt = <4500>;
 		maxim,rsns-microohm = <5000>;
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 22/46] ARM: orion: fix include path

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 63872304bdb3decd5454f4dd210c25395278ed13 ]

Now that CONFIG_ARCH_MULTIPLATFORM can be disabled anywhere,
there is a build failure for plat-orion:

arch/arm/plat-orion/irq.c:19:10: fatal error: plat/irq.h: No such file or directory

Make the include path unconditional.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/plat-orion/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile
index 4e3f25de13c1..830b0be038c6 100644
--- a/arch/arm/plat-orion/Makefile
+++ b/arch/arm/plat-orion/Makefile
@@ -2,7 +2,7 @@
 #
 # Makefile for the linux kernel.
 #
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+ccflags-y := -I$(srctree)/$(src)/include
 
 orion-gpio-$(CONFIG_GPIOLIB)      += gpio.o
 obj-$(CONFIG_PLAT_ORION_LEGACY)   += irq.o pcie.o time.o common.o mpp.o
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 42/46] arm64: dts: uniphier: Add USB-device support for PXs3 reference board

[Sasha Levin]

From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

[ Upstream commit 19fee1a1096d21ab1f1e712148b5417bda2939a2 ]

PXs3 reference board can change each USB port 0 and 1 to device mode
with jumpers. Prepare devicetree sources for USB port 0 and 1.

This specifies dr_mode, pinctrl, and some quirks and removes nodes for
unused phys and vbus-supply properties.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042321.4817-8-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/uniphier-pinctrl.dtsi       | 10 +++++
 arch/arm64/boot/dts/socionext/Makefile        |  4 +-
 .../socionext/uniphier-pxs3-ref-gadget0.dts   | 41 +++++++++++++++++++
 .../socionext/uniphier-pxs3-ref-gadget1.dts   | 40 ++++++++++++++++++
 4 files changed, 94 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts
 create mode 100644 arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts

diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
index c0fd029b37e5..f909ec2e5333 100644
--- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi
+++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
@@ -196,11 +196,21 @@ pinctrl_usb0: usb0 {
 		function = "usb0";
 	};
 
+	pinctrl_usb0_device: usb0-device {
+		groups = "usb0_device";
+		function = "usb0";
+	};
+
 	pinctrl_usb1: usb1 {
 		groups = "usb1";
 		function = "usb1";
 	};
 
+	pinctrl_usb1_device: usb1-device {
+		groups = "usb1_device";
+		function = "usb1";
+	};
+
 	pinctrl_usb2: usb2 {
 		groups = "usb2";
 		function = "usb2";
diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile
index dda3da33614b..33989a9643ac 100644
--- a/arch/arm64/boot/dts/socionext/Makefile
+++ b/arch/arm64/boot/dts/socionext/Makefile
@@ -5,4 +5,6 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \
 	uniphier-ld20-akebi96.dtb \
 	uniphier-ld20-global.dtb \
 	uniphier-ld20-ref.dtb \
-	uniphier-pxs3-ref.dtb
+	uniphier-pxs3-ref.dtb \
+	uniphier-pxs3-ref-gadget0.dtb \
+	uniphier-pxs3-ref-gadget1.dtb
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts
new file mode 100644
index 000000000000..7069f51bc120
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+//
+// Device Tree Source for UniPhier PXs3 Reference Board (for USB-Device #0)
+//
+// Copyright (C) 2021 Socionext Inc.
+//   Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pxs3-ref.dts"
+
+/ {
+	model = "UniPhier PXs3 Reference Board (USB-Device #0)";
+};
+
+/* I2C3 pinctrl is shared with USB*VBUSIN */
+&i2c3 {
+	status = "disabled";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "peripheral";
+	pinctrl-0 = <&pinctrl_usb0_device>;
+	snps,dis_enblslpm_quirk;
+	snps,dis_u2_susphy_quirk;
+	snps,dis_u3_susphy_quirk;
+	snps,usb2_gadget_lpm_disable;
+	phy-names = "usb2-phy", "usb3-phy";
+	phys = <&usb0_hsphy0>, <&usb0_ssphy0>;
+};
+
+&usb0_hsphy0 {
+	/delete-property/ vbus-supply;
+};
+
+&usb0_ssphy0 {
+	/delete-property/ vbus-supply;
+};
+
+/delete-node/ &usb0_hsphy1;
+/delete-node/ &usb0_ssphy1;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts
new file mode 100644
index 000000000000..a3cfa8113ffb
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+//
+// Device Tree Source for UniPhier PXs3 Reference Board (for USB-Device #1)
+//
+// Copyright (C) 2021 Socionext Inc.
+//   Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pxs3-ref.dts"
+
+/ {
+	model = "UniPhier PXs3 Reference Board (USB-Device #1)";
+};
+
+/* I2C3 pinctrl is shared with USB*VBUSIN */
+&i2c3 {
+	status = "disabled";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "peripheral";
+	pinctrl-0 = <&pinctrl_usb1_device>;
+	snps,dis_enblslpm_quirk;
+	snps,dis_u2_susphy_quirk;
+	snps,dis_u3_susphy_quirk;
+	snps,usb2_gadget_lpm_disable;
+	phy-names = "usb2-phy", "usb3-phy";
+	phys = <&usb1_hsphy0>, <&usb1_ssphy0>;
+};
+
+&usb1_hsphy0 {
+	/delete-property/ vbus-supply;
+};
+
+&usb1_ssphy0 {
+	/delete-property/ vbus-supply;
+};
+
+/delete-node/ &usb1_hsphy1;
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 43/46] ARM: 9233/1: stacktrace: Skip frame pointer boundary check for call_with_stack()

[Sasha Levin]

From: Li Huafei <lihuafei1@huawei.com>

[ Upstream commit 5854e4d8530e6ed4c2532a71a6b0474e199d44dd ]

When using the frame pointer unwinder, it was found that the stack trace
output of stack_trace_save() is incomplete if the stack contains
call_with_stack():

 [0x7f00002c] dump_stack_task+0x2c/0x90 [hrtimer]
 [0x7f0000a0] hrtimer_hander+0x10/0x18 [hrtimer]
 [0x801a67f0] __hrtimer_run_queues+0x1b0/0x3b4
 [0x801a7350] hrtimer_run_queues+0xc4/0xd8
 [0x801a597c] update_process_times+0x3c/0x88
 [0x801b5a98] tick_periodic+0x50/0xd8
 [0x801b5bf4] tick_handle_periodic+0x24/0x84
 [0x8010ffc4] twd_handler+0x38/0x48
 [0x8017d220] handle_percpu_devid_irq+0xa8/0x244
 [0x80176e9c] generic_handle_domain_irq+0x2c/0x3c
 [0x8052e3a8] gic_handle_irq+0x7c/0x90
 [0x808ab15c] generic_handle_arch_irq+0x60/0x80
 [0x8051191c] call_with_stack+0x1c/0x20

For the frame pointer unwinder, unwind_frame() checks stackframe::fp by
stackframe::sp. Since call_with_stack() switches the SP from one stack
to another, stackframe::fp and stackframe: :sp will point to different
stacks, so we can no longer check stackframe::fp by stackframe::sp. Skip
checking stackframe::fp at this point to avoid this problem.

Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Linus Waleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/kernel/stacktrace.c   | 40 ++++++++++++++++++++++++++++------
 arch/arm/lib/call_with_stack.S |  2 ++
 2 files changed, 35 insertions(+), 7 deletions(-)

diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index d0fa2037460a..af87040b0353 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -9,6 +9,8 @@
 #include <asm/stacktrace.h>
 #include <asm/traps.h>
 
+#include "reboot.h"
+
 #if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
 /*
  * Unwind the current stack frame and store the new register values in the
@@ -39,29 +41,53 @@
  * Note that with framepointer enabled, even the leaf functions have the same
  * prologue and epilogue, therefore we can ignore the LR value in this case.
  */
-int notrace unwind_frame(struct stackframe *frame)
+
+extern unsigned long call_with_stack_end;
+
+static int frame_pointer_check(struct stackframe *frame)
 {
 	unsigned long high, low;
 	unsigned long fp = frame->fp;
+	unsigned long pc = frame->pc;
+
+	/*
+	 * call_with_stack() is the only place we allow SP to jump from one
+	 * stack to another, with FP and SP pointing to different stacks,
+	 * skipping the FP boundary check at this point.
+	 */
+	if (pc >= (unsigned long)&call_with_stack &&
+			pc < (unsigned long)&call_with_stack_end)
+		return 0;
 
 	/* only go to a higher address on the stack */
 	low = frame->sp;
 	high = ALIGN(low, THREAD_SIZE);
 
-#ifdef CONFIG_CC_IS_CLANG
 	/* check current frame pointer is within bounds */
+#ifdef CONFIG_CC_IS_CLANG
 	if (fp < low + 4 || fp > high - 4)
 		return -EINVAL;
-
-	frame->sp = frame->fp;
-	frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp));
-	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 4));
 #else
-	/* check current frame pointer is within bounds */
 	if (fp < low + 12 || fp > high - 4)
 		return -EINVAL;
+#endif
+
+	return 0;
+}
+
+int notrace unwind_frame(struct stackframe *frame)
+{
+	unsigned long fp = frame->fp;
+
+	if (frame_pointer_check(frame))
+		return -EINVAL;
 
 	/* restore the registers from the stack frame */
+#ifdef CONFIG_CC_IS_CLANG
+	frame->sp = frame->fp;
+	frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp));
+	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 4));
+#else
 	frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 12));
 	frame->sp = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 8));
 	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 4));
diff --git a/arch/arm/lib/call_with_stack.S b/arch/arm/lib/call_with_stack.S
index 0a268a6c513c..5030d4e8d126 100644
--- a/arch/arm/lib/call_with_stack.S
+++ b/arch/arm/lib/call_with_stack.S
@@ -46,4 +46,6 @@ UNWIND( .setfp	fpreg, sp	)
 	pop	{fpreg, pc}
 UNWIND( .fnend			)
 #endif
+	.globl call_with_stack_end
+call_with_stack_end:
 ENDPROC(call_with_stack)
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 44/46] ARM: 9234/1: stacktrace: Avoid duplicate saving of exception PC value

[Sasha Levin]

From: Li Huafei <lihuafei1@huawei.com>

[ Upstream commit 752ec621ef5c30777958cc5eb5f1cf394f7733f4 ]

Because an exception stack frame is not created in the exception entry,
save_trace() does special handling for the exception PC, but this is
only needed when CONFIG_FRAME_POINTER_UNWIND=y. When
CONFIG_ARM_UNWIND=y, unwind annotations have been added to the exception
entry and save_trace() will repeatedly save the exception PC:

    [0x7f000090] hrtimer_hander+0x8/0x10 [hrtimer]
    [0x8019ec50] __hrtimer_run_queues+0x18c/0x394
    [0x8019f760] hrtimer_run_queues+0xbc/0xd0
    [0x8019def0] update_process_times+0x34/0x80
    [0x801ad2a4] tick_periodic+0x48/0xd0
    [0x801ad3dc] tick_handle_periodic+0x1c/0x7c
    [0x8010f2e0] twd_handler+0x30/0x40
    [0x80177620] handle_percpu_devid_irq+0xa0/0x23c
    [0x801718d0] generic_handle_domain_irq+0x24/0x34
    [0x80502d28] gic_handle_irq+0x74/0x88
    [0x8085817c] generic_handle_arch_irq+0x58/0x78
    [0x80100ba8] __irq_svc+0x88/0xc8
    [0x80108114] arch_cpu_idle+0x38/0x3c
    [0x80108114] arch_cpu_idle+0x38/0x3c    <==== duplicate saved exception PC
    [0x80861bf8] default_idle_call+0x38/0x130
    [0x8015d5cc] do_idle+0x150/0x214
    [0x8015d978] cpu_startup_entry+0x18/0x1c
    [0x808589c0] rest_init+0xd8/0xdc
    [0x80c00a44] arch_post_acpi_subsys_init+0x0/0x8

We can move the special handling of the exception PC in save_trace() to
the unwind_frame() of the frame pointer unwinder.

Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Linus Waleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/include/asm/stacktrace.h |  6 +++++
 arch/arm/kernel/return_address.c  |  1 +
 arch/arm/kernel/stacktrace.c      | 44 +++++++++++++++++++++----------
 3 files changed, 37 insertions(+), 14 deletions(-)

diff --git a/arch/arm/include/asm/stacktrace.h b/arch/arm/include/asm/stacktrace.h
index 3e78f921b8b2..39be2d1aa27b 100644
--- a/arch/arm/include/asm/stacktrace.h
+++ b/arch/arm/include/asm/stacktrace.h
@@ -21,6 +21,9 @@ struct stackframe {
 	struct llist_node *kr_cur;
 	struct task_struct *tsk;
 #endif
+#ifdef CONFIG_UNWINDER_FRAME_POINTER
+	bool ex_frame;
+#endif
 };
 
 static __always_inline
@@ -34,6 +37,9 @@ void arm_get_current_stackframe(struct pt_regs *regs, struct stackframe *frame)
 		frame->kr_cur = NULL;
 		frame->tsk = current;
 #endif
+#ifdef CONFIG_UNWINDER_FRAME_POINTER
+		frame->ex_frame = in_entry_text(frame->pc);
+#endif
 }
 
 extern int unwind_frame(struct stackframe *frame);
diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
index 8aac1e10b117..38f1ea9c724d 100644
--- a/arch/arm/kernel/return_address.c
+++ b/arch/arm/kernel/return_address.c
@@ -47,6 +47,7 @@ void *return_address(unsigned int level)
 	frame.kr_cur = NULL;
 	frame.tsk = current;
 #endif
+	frame.ex_frame = false;
 
 	walk_stackframe(&frame, save_return_addr, &data);
 
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index af87040b0353..85443b5d1922 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -82,6 +82,27 @@ int notrace unwind_frame(struct stackframe *frame)
 	if (frame_pointer_check(frame))
 		return -EINVAL;
 
+	/*
+	 * When we unwind through an exception stack, include the saved PC
+	 * value into the stack trace.
+	 */
+	if (frame->ex_frame) {
+		struct pt_regs *regs = (struct pt_regs *)frame->sp;
+
+		/*
+		 * We check that 'regs + sizeof(struct pt_regs)' (that is,
+		 * &regs[1]) does not exceed the bottom of the stack to avoid
+		 * accessing data outside the task's stack. This may happen
+		 * when frame->ex_frame is a false positive.
+		 */
+		if ((unsigned long)&regs[1] > ALIGN(frame->sp, THREAD_SIZE))
+			return -EINVAL;
+
+		frame->pc = regs->ARM_pc;
+		frame->ex_frame = false;
+		return 0;
+	}
+
 	/* restore the registers from the stack frame */
 #ifdef CONFIG_CC_IS_CLANG
 	frame->sp = frame->fp;
@@ -98,6 +119,9 @@ int notrace unwind_frame(struct stackframe *frame)
 					(void *)frame->fp, &frame->kr_cur);
 #endif
 
+	if (in_entry_text(frame->pc))
+		frame->ex_frame = true;
+
 	return 0;
 }
 #endif
@@ -128,7 +152,6 @@ static int save_trace(struct stackframe *frame, void *d)
 {
 	struct stack_trace_data *data = d;
 	struct stack_trace *trace = data->trace;
-	struct pt_regs *regs;
 	unsigned long addr = frame->pc;
 
 	if (data->no_sched_functions && in_sched_functions(addr))
@@ -139,19 +162,6 @@ static int save_trace(struct stackframe *frame, void *d)
 	}
 
 	trace->entries[trace->nr_entries++] = addr;
-
-	if (trace->nr_entries >= trace->max_entries)
-		return 1;
-
-	if (!in_entry_text(frame->pc))
-		return 0;
-
-	regs = (struct pt_regs *)frame->sp;
-	if ((unsigned long)&regs[1] > ALIGN(frame->sp, THREAD_SIZE))
-		return 0;
-
-	trace->entries[trace->nr_entries++] = regs->ARM_pc;
-
 	return trace->nr_entries >= trace->max_entries;
 }
 
@@ -193,6 +203,9 @@ static noinline void __save_stack_trace(struct task_struct *tsk,
 	frame.kr_cur = NULL;
 	frame.tsk = tsk;
 #endif
+#ifdef CONFIG_UNWINDER_FRAME_POINTER
+	frame.ex_frame = false;
+#endif
 
 	walk_stackframe(&frame, save_trace, &data);
 }
@@ -214,6 +227,9 @@ void save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace)
 	frame.kr_cur = NULL;
 	frame.tsk = current;
 #endif
+#ifdef CONFIG_UNWINDER_FRAME_POINTER
+	frame.ex_frame = in_entry_text(frame.pc);
+#endif
 
 	walk_stackframe(&frame, save_trace, &data);
 }
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.0 45/46] ARM: 9242/1: kasan: Only map modules if CONFIG_KASAN_VMALLOC=n

[Sasha Levin]

From: Alex Sverdlin <alexander.sverdlin@nokia.com>

[ Upstream commit 823f606ab6b4759a1faf0388abcf4fb0776710d2 ]

In case CONFIG_KASAN_VMALLOC=y kasan_populate_vmalloc() allocates the
shadow pages dynamically. But even worse is that kasan_release_vmalloc()
releases them, which is not compatible with create_mapping() of
MODULES_VADDR..MODULES_END range:

BUG: Bad page state in process kworker/9:1  pfn:2068b
page:e5e06160 refcount:0 mapcount:0 mapping:00000000 index:0x0
flags: 0x1000(reserved)
raw: 00001000 e5e06164 e5e06164 00000000 00000000 00000000 ffffffff 00000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
bad because of flags: 0x1000(reserved)
Modules linked in: ip_tables
CPU: 9 PID: 154 Comm: kworker/9:1 Not tainted 5.4.188-... #1
Hardware name: LSI Axxia AXM55XX
Workqueue: events do_free_init
unwind_backtrace
show_stack
dump_stack
bad_page
free_pcp_prepare
free_unref_page
kasan_depopulate_vmalloc_pte
__apply_to_page_range
apply_to_existing_page_range
kasan_release_vmalloc
__purge_vmap_area_lazy
_vm_unmap_aliases.part.0
__vunmap
do_free_init
process_one_work
worker_thread
kthread

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/kasan_init.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mm/kasan_init.c b/arch/arm/mm/kasan_init.c
index 29caee9c79ce..46d9f4a622cb 100644
--- a/arch/arm/mm/kasan_init.c
+++ b/arch/arm/mm/kasan_init.c
@@ -268,12 +268,17 @@ void __init kasan_init(void)
 
 	/*
 	 * 1. The module global variables are in MODULES_VADDR ~ MODULES_END,
-	 *    so we need to map this area.
+	 *    so we need to map this area if CONFIG_KASAN_VMALLOC=n. With
+	 *    VMALLOC support KASAN will manage this region dynamically,
+	 *    refer to kasan_populate_vmalloc() and ARM's implementation of
+	 *    module_alloc().
 	 * 2. PKMAP_BASE ~ PKMAP_BASE+PMD_SIZE's shadow and MODULES_VADDR
 	 *    ~ MODULES_END's shadow is in the same PMD_SIZE, so we can't
 	 *    use kasan_populate_zero_shadow.
 	 */
-	create_mapping((void *)MODULES_VADDR, (void *)(PKMAP_BASE + PMD_SIZE));
+	if (!IS_ENABLED(CONFIG_KASAN_VMALLOC) && IS_ENABLED(CONFIG_MODULES))
+		create_mapping((void *)MODULES_VADDR, (void *)(MODULES_END));
+	create_mapping((void *)PKMAP_BASE, (void *)(PKMAP_BASE + PMD_SIZE));
 
 	/*
 	 * KAsan may reuse the contents of kasan_early_shadow_pte directly, so
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel