linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>,
	Shawn Guo <shawnguo@kernel.org>, Sasha Levin <sashal@kernel.org>,
	robh+dt@kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 5.19 02/40] ARM: dts: imx6: delete interrupts property if interrupts-extended is set
Date: Tue, 11 Oct 2022 10:50:51 -0400	[thread overview]
Message-ID: <20221011145129.1623487-2-sashal@kernel.org> (raw)
In-Reply-To: <20221011145129.1623487-1-sashal@kernel.org>

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit c9d38ff7080b2c4fa6786b82210fa13115895aae ]

In most cases this is related to fsl,err006687-workaround-present, which
requires a GPIO interrupt next a GIC interrupt.

This fixes the dtbs_check warning:
imx6dl-mba6a.dtb: ethernet@2188000: More than one condition true in oneOf schema:
        {'$filename': 'Documentation/devicetree/bindings/net/fsl,fec.yaml',
[...]

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6dl-riotboard.dts        | 1 +
 arch/arm/boot/dts/imx6q-arm2.dts              | 1 +
 arch/arm/boot/dts/imx6q-evi.dts               | 1 +
 arch/arm/boot/dts/imx6q-mccmon6.dts           | 1 +
 arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi      | 1 +
 arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi  | 1 +
 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 1 +
 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi     | 1 +
 arch/arm/boot/dts/imx6qdl-sabreauto.dtsi      | 1 +
 arch/arm/boot/dts/imx6qdl-tqma6a.dtsi         | 1 +
 arch/arm/boot/dts/imx6qdl-ts7970.dtsi         | 1 +
 11 files changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index e7d9bfbfd0e4..e7be05f205d3 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -90,6 +90,7 @@ &fec {
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&rgmii_phy>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 0b40f52268b3..75586299d9ca 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -178,6 +178,7 @@ &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
index c63f371ede8b..78d941fef5df 100644
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -146,6 +146,7 @@ &fec {
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts
index 55692c73943d..64ab01018b71 100644
--- a/arch/arm/boot/dts/imx6q-mccmon6.dts
+++ b/arch/arm/boot/dts/imx6q-mccmon6.dts
@@ -100,6 +100,7 @@ &fec {
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index 0ad4cb4f1e82..a53a5d0766a5 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -192,6 +192,7 @@ &fec {
 	phy-mode = "rgmii";
 	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index beaa2dcd436c..57c21a01f126 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -334,6 +334,7 @@ &fec {
 	phy-mode = "rgmii";
 	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
index ee7e2371f94b..000e9dc97b1a 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -263,6 +263,7 @@ &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 904d5d051d63..731759bdd7f5 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -267,6 +267,7 @@ &fec {
 	phy-mode = "rgmii";
 	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 1368a4762037..3dbb460ef102 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -295,6 +295,7 @@ &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
index 7dc3f0005b0f..0a36e1bce375 100644
--- a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 &fec {
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
index d6ba4b2a60f6..c096d25a6f5b 100644
--- a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
@@ -192,6 +192,7 @@ &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

       reply	other threads:[~2022-10-11 15:04 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20221011145129.1623487-1-sashal@kernel.org>
2022-10-11 14:50 ` Sasha Levin [this message]
2022-10-11 14:50 ` [PATCH AUTOSEL 5.19 03/40] ARM: dts: imx7d-sdb: config the max pressure for tsc2046 Sasha Levin
2022-10-11 14:50 ` [PATCH AUTOSEL 5.19 04/40] soc: mediatek: Let PMIC Wrapper and SCPSYS depend on OF Sasha Levin
2022-10-11 14:50 ` [PATCH AUTOSEL 5.19 06/40] ARM: dts: imx6q: add missing properties for sram Sasha Levin
2022-10-11 14:50 ` [PATCH AUTOSEL 5.19 07/40] ARM: dts: imx6dl: " Sasha Levin
2022-10-11 14:50 ` [PATCH AUTOSEL 5.19 08/40] ARM: dts: imx6qp: " Sasha Levin
2022-10-11 14:50 ` [PATCH AUTOSEL 5.19 09/40] ARM: dts: imx6sl: " Sasha Levin
2022-10-11 14:50 ` [PATCH AUTOSEL 5.19 10/40] ARM: dts: imx6sll: " Sasha Levin
2022-10-11 14:51 ` [PATCH AUTOSEL 5.19 11/40] ARM: dts: imx6sx: " Sasha Levin
2022-10-11 14:51 ` [PATCH AUTOSEL 5.19 12/40] ARM: dts: imx6sl: use tabs for code indent Sasha Levin
2022-10-11 14:51 ` [PATCH AUTOSEL 5.19 13/40] ARM: dts: imx6sx-udoo-neo: don't use multiple blank lines Sasha Levin
2022-10-11 14:51 ` [PATCH AUTOSEL 5.19 14/40] kselftest/arm64: Fix validatation termination record after EXTRA_CONTEXT Sasha Levin
2022-10-11 14:51 ` [PATCH AUTOSEL 5.19 15/40] kselftest/arm64: Allow larger buffers in get_signal_context() Sasha Levin
2022-10-11 14:51 ` [PATCH AUTOSEL 5.19 17/40] arm64: atomics: remove LL/SC trampolines Sasha Levin
2022-10-12  8:53   ` Catalin Marinas
2022-10-13 17:57     ` Sasha Levin
2022-10-11 14:51 ` [PATCH AUTOSEL 5.19 18/40] arm64: run softirqs on the per-CPU IRQ stack Sasha Levin
2022-10-11 14:51 ` [PATCH AUTOSEL 5.19 19/40] arm64: dts: imx8mm-kontron: Use the VSELECT signal to switch SD card IO voltage Sasha Levin
2022-10-11 14:51 ` [PATCH AUTOSEL 5.19 20/40] arm64: dts: imx8ulp: no executable source file permission Sasha Levin
2022-10-11 14:51 ` [PATCH AUTOSEL 5.19 21/40] arm64: dts: imx8mq-librem5: Add bq25895 as max17055's power supply Sasha Levin
2022-10-11 14:51 ` [PATCH AUTOSEL 5.19 22/40] ARM: orion: fix include path Sasha Levin
2022-10-11 14:51 ` [PATCH AUTOSEL 5.19 36/40] arm64: dts: uniphier: Add USB-device support for PXs3 reference board Sasha Levin
2022-10-11 14:51 ` [PATCH AUTOSEL 5.19 37/40] ARM: 9233/1: stacktrace: Skip frame pointer boundary check for call_with_stack() Sasha Levin
2022-10-11 14:51 ` [PATCH AUTOSEL 5.19 38/40] ARM: 9234/1: stacktrace: Avoid duplicate saving of exception PC value Sasha Levin
2022-10-11 14:51 ` [PATCH AUTOSEL 5.19 39/40] ARM: 9242/1: kasan: Only map modules if CONFIG_KASAN_VMALLOC=n Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221011145129.1623487-2-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=alexander.stein@ew.tq-group.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).