From: Andrew Davis <afd@ti.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: Andrew Davis <afd@ti.com>
Subject: [PATCH 02/10] arm64: dts: ti: k3-am64: Enable I2C nodes at the board level
Date: Mon, 17 Oct 2022 14:25:24 -0500 [thread overview]
Message-ID: <20221017192532.23825-3-afd@ti.com> (raw)
In-Reply-To: <20221017192532.23825-1-afd@ti.com>
I2C nodes defined in the top-level AM64x SoC dtsi files are incomplete
and will not be functional unless they are extended with pinmux
information.
As the pinmux is only known at the board integration level, these
nodes should only be enabled when provided with this information.
Disable the I2C nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
---
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 4 ++++
arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi | 2 ++
arch/arm64/boot/dts/ti/k3-am642-evm.dts | 9 +--------
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 13 +------------
4 files changed, 8 insertions(+), 20 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index a115c668d001..fdcacf78f4a6 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -321,6 +321,7 @@ main_i2c0: i2c@20000000 {
power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 102 2>;
clock-names = "fck";
+ status = "disabled";
};
main_i2c1: i2c@20010000 {
@@ -332,6 +333,7 @@ main_i2c1: i2c@20010000 {
power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 103 2>;
clock-names = "fck";
+ status = "disabled";
};
main_i2c2: i2c@20020000 {
@@ -343,6 +345,7 @@ main_i2c2: i2c@20020000 {
power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 104 2>;
clock-names = "fck";
+ status = "disabled";
};
main_i2c3: i2c@20030000 {
@@ -354,6 +357,7 @@ main_i2c3: i2c@20030000 {
power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 105 2>;
clock-names = "fck";
+ status = "disabled";
};
main_spi0: spi@20100000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
index 1181ad017626..5ce8ceb3779d 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
@@ -37,6 +37,7 @@ mcu_i2c0: i2c@4900000 {
power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 106 2>;
clock-names = "fck";
+ status = "disabled";
};
mcu_i2c1: i2c@4910000 {
@@ -48,6 +49,7 @@ mcu_i2c1: i2c@4910000 {
power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 107 2>;
clock-names = "fck";
+ status = "disabled";
};
mcu_spi0: spi@4b00000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index 78f246077ca9..3903e907244e 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -336,6 +336,7 @@ &main_uart1 {
};
&main_i2c1 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
@@ -378,14 +379,6 @@ &mcu_gpio0 {
status = "reserved";
};
-&mcu_i2c0 {
- status = "disabled";
-};
-
-&mcu_i2c1 {
- status = "disabled";
-};
-
&mcu_spi0 {
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 8423295150fc..56763d839e05 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -349,15 +349,8 @@ &main_uart1 {
status = "reserved";
};
-&mcu_i2c0 {
- status = "disabled";
-};
-
-&mcu_i2c1 {
- status = "disabled";
-};
-
&main_i2c1 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
@@ -382,10 +375,6 @@ exp2: gpio@60 {
};
};
-&main_i2c3 {
- status = "disabled";
-};
-
&mcu_spi0 {
status = "disabled";
};
--
2.37.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-10-17 19:29 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-17 19:25 [PATCH 00/10] AM64x Disable Incomplete DT Nodes Andrew Davis
2022-10-17 19:25 ` [PATCH 01/10] arm64: dts: ti: k3-am64: Enable UART nodes at the board level Andrew Davis
2022-10-17 19:25 ` Andrew Davis [this message]
2022-10-17 19:25 ` [PATCH 03/10] arm64: dts: ti: k3-am64: Enable SPI " Andrew Davis
2022-10-17 19:25 ` [PATCH 04/10] arm64: dts: ti: k3-am64: Enable EPWM " Andrew Davis
2022-10-17 19:25 ` [PATCH 05/10] arm64: dts: ti: k3-am64: Enable ECAP " Andrew Davis
2022-10-17 19:25 ` [PATCH 06/10] arm64: dts: ti: k3-am64: Enable PCIe " Andrew Davis
2022-10-17 19:25 ` [PATCH 07/10] arm64: dts: ti: k3-am64: MDIO pinmux should belong to the MDIO node Andrew Davis
2022-10-17 19:25 ` [PATCH 08/10] arm64: dts: ti: k3-am64: Enable MDIO nodes at the board level Andrew Davis
2022-10-17 19:25 ` [PATCH 09/10] arm64: dts: ti: k3-am64: Enable MCAN " Andrew Davis
2022-10-17 19:25 ` [PATCH 10/10] arm64: dts: ti: k3-am64: Enable GPMC and ELM " Andrew Davis
2022-10-18 15:24 ` [PATCH 00/10] AM64x Disable Incomplete DT Nodes Bryan Brattlof
2022-10-27 6:33 ` Vignesh Raghavendra
2022-10-28 13:30 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221017192532.23825-3-afd@ti.com \
--to=afd@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).