Re: [RESEND] clocksource: sun4i: Fix the bug that tick_resume stucks

[maxime@cerno.tech]

Hi,

On Tue, Oct 25, 2022 at 02:23:09PM +0800, Victor Hassan wrote:
> On 2022/10/9 11:25, Victor Hassan wrote:
> > Currently syscore_resume() will stuck on tick_resume().
> > Fix this by changing  `.tick_resume` from
> > sun4i_clkevt_shutdown() to a new function sun4i_tick_resume().
> > 
> > Signed-off-by: Victor Hassan <victor@allwinnertech.com>
> > ---
> >   drivers/clocksource/timer-sun4i.c | 131 ++++++++++++++++++++++--------
> >   1 file changed, 96 insertions(+), 35 deletions(-)
> > 
> > diff --git a/drivers/clocksource/timer-sun4i.c b/drivers/clocksource/timer-sun4i.c
> > index 94dc6e42e983..574398c35a22 100644
> > --- a/drivers/clocksource/timer-sun4i.c
> > +++ b/drivers/clocksource/timer-sun4i.c
> > @@ -38,6 +38,19 @@
> >   #define TIMER_SYNC_TICKS	3
> > +/* Registers which needs to be saved and restored before and after sleeping */
> > +static u32 sun4i_timer_regs_offset[] = {
> > +	TIMER_IRQ_EN_REG,
> > +	TIMER_CTL_REG(0),
> > +	TIMER_INTVAL_REG(0),
> > +	TIMER_CNTVAL_REG(0),
> > +	TIMER_CTL_REG(1),
> > +	TIMER_INTVAL_REG(1),
> > +	TIMER_CNTVAL_REG(1),
> > +};
> > +
> > +static void __iomem *sun4i_timer_sched_base __read_mostly;
> > +
> >   /*
> >    * When we disable a timer, we need to wait at least for 2 cycles of
> >    * the timer source clock. We will use for that the clocksource timer
> > @@ -79,10 +92,41 @@ static void sun4i_clkevt_time_start(void __iomem *base, u8 timer,
> >   	       base + TIMER_CTL_REG(timer));
> >   }
> > +static inline void sun4i_timer_save_regs(struct timer_of *to)
> > +{
> > +	void __iomem *base = timer_of_base(to);
> > +	int i;
> > +	u32 *regs_backup = (u32 *)to->private_data;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(sun4i_timer_regs_offset); i++)
> > +		regs_backup[i] = readl(base + sun4i_timer_regs_offset[i]);
> > +}
> > +
> > +static inline void sun4i_timer_restore_regs(struct timer_of *to)
> > +{
> > +	void __iomem *base = timer_of_base(to);
> > +	int i;
> > +	u32 *regs_backup = (u32 *)to->private_data;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(sun4i_timer_regs_offset); i++)
> > +		writel(regs_backup[i], base + sun4i_timer_regs_offset[i]);
> > +}
> > +
> >   static int sun4i_clkevt_shutdown(struct clock_event_device *evt)
> >   {
> >   	struct timer_of *to = to_timer_of(evt);
> > +	sun4i_timer_save_regs(to);
> > +	sun4i_clkevt_time_stop(timer_of_base(to), 0);
> > +
> > +	return 0;
> > +}
> > +
> > +static int sun4i_tick_resume(struct clock_event_device *evt)
> > +{
> > +	struct timer_of *to = to_timer_of(evt);
> > +
> > +	sun4i_timer_restore_regs(to);
> >   	sun4i_clkevt_time_stop(timer_of_base(to), 0);
> >   	return 0;
> > @@ -137,45 +181,54 @@ static irqreturn_t sun4i_timer_interrupt(int irq, void *dev_id)
> >   	return IRQ_HANDLED;
> >   }
> > -static struct timer_of to = {
> > -	.flags = TIMER_OF_IRQ | TIMER_OF_CLOCK | TIMER_OF_BASE,
> > -
> > -	.clkevt = {
> > -		.name = "sun4i_tick",
> > -		.rating = 350,
> > -		.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
> > -		.set_state_shutdown = sun4i_clkevt_shutdown,
> > -		.set_state_periodic = sun4i_clkevt_set_periodic,
> > -		.set_state_oneshot = sun4i_clkevt_set_oneshot,
> > -		.tick_resume = sun4i_clkevt_shutdown,
> > -		.set_next_event = sun4i_clkevt_next_event,
> > -		.cpumask = cpu_possible_mask,
> > -	},
> > -
> > -	.of_irq = {
> > -		.handler = sun4i_timer_interrupt,
> > -		.flags = IRQF_TIMER | IRQF_IRQPOLL,
> > -	},
> > -};
> > +static void __init sun4i_clockevent_init(struct timer_of *to)
> > +{
> > +	to->clkevt.name = "sun4i_tick";
> > +	to->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
> > +	to->clkevt.set_state_shutdown = sun4i_clkevt_shutdown;
> > +	to->clkevt.set_state_periodic = sun4i_clkevt_set_periodic;
> > +	to->clkevt.set_state_oneshot = sun4i_clkevt_set_oneshot;
> > +	to->clkevt.tick_resume = sun4i_tick_resume;
> > +	to->clkevt.set_next_event = sun4i_clkevt_next_event;
> > +	to->clkevt.cpumask = cpu_possible_mask;
> > +	to->of_irq.flags = IRQF_TIMER | IRQF_IRQPOLL;
> > +
> > +	sun4i_timer_sched_base = timer_of_base(to) + TIMER_CNTVAL_REG(1);
> > +}
> >   static u64 notrace sun4i_timer_sched_read(void)
> >   {
> > -	return ~readl(timer_of_base(&to) + TIMER_CNTVAL_REG(1));
> > +	return (u64)~readl(sun4i_timer_sched_base);
> >   }
> >   static int __init sun4i_timer_init(struct device_node *node)
> >   {
> > +	struct timer_of *to;
> >   	int ret;
> >   	u32 val;
> > -	ret = timer_of_init(node, &to);
> > +	to = kzalloc(sizeof(*to), GFP_KERNEL);
> > +	if (!to)
> > +		return -ENOMEM;
> > +
> > +	to->flags = TIMER_OF_IRQ | TIMER_OF_CLOCK | TIMER_OF_BASE;
> > +	to->of_irq.handler = sun4i_timer_interrupt;
> > +	ret = timer_of_init(node, to);
> >   	if (ret)
> > -		return ret;
> > +		goto err;
> > -	writel(~0, timer_of_base(&to) + TIMER_INTVAL_REG(1));
> > +	sun4i_clockevent_init(to);
> > +
> > +	to->private_data = kcalloc(ARRAY_SIZE(sun4i_timer_regs_offset), sizeof(u32), GFP_KERNEL);
> > +	if (!to->private_data) {
> > +		ret = -ENOMEM;
> > +		goto err1;
> > +	}
> > +
> > +	writel(~0, timer_of_base(to) + TIMER_INTVAL_REG(1));
> >   	writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD |
> >   	       TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M),
> > -	       timer_of_base(&to) + TIMER_CTL_REG(1));
> > +	       timer_of_base(to) + TIMER_CTL_REG(1));
> >   	/*
> >   	 * sched_clock_register does not have priorities, and on sun6i and
> > @@ -186,32 +239,40 @@ static int __init sun4i_timer_init(struct device_node *node)
> >   	    of_machine_is_compatible("allwinner,sun5i-a10s") ||
> >   	    of_machine_is_compatible("allwinner,suniv-f1c100s"))
> >   		sched_clock_register(sun4i_timer_sched_read, 32,
> > -				     timer_of_rate(&to));
> > +				     timer_of_rate(to));
> > -	ret = clocksource_mmio_init(timer_of_base(&to) + TIMER_CNTVAL_REG(1),
> > -				    node->name, timer_of_rate(&to), 350, 32,
> > +	ret = clocksource_mmio_init(timer_of_base(to) + TIMER_CNTVAL_REG(1),
> > +				    node->name, timer_of_rate(to), 350, 32,
> >   				    clocksource_mmio_readl_down);
> >   	if (ret) {
> >   		pr_err("Failed to register clocksource\n");
> > -		return ret;
> > +		goto err2;
> >   	}
> >   	writel(TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M),
> > -	       timer_of_base(&to) + TIMER_CTL_REG(0));
> > +	       timer_of_base(to) + TIMER_CTL_REG(0));
> >   	/* Make sure timer is stopped before playing with interrupts */
> > -	sun4i_clkevt_time_stop(timer_of_base(&to), 0);
> > +	sun4i_clkevt_time_stop(timer_of_base(to), 0);
> >   	/* clear timer0 interrupt */
> > -	sun4i_timer_clear_interrupt(timer_of_base(&to));
> > +	sun4i_timer_clear_interrupt(timer_of_base(to));
> > -	clockevents_config_and_register(&to.clkevt, timer_of_rate(&to),
> > +	clockevents_config_and_register(&to->clkevt, timer_of_rate(to),
> >   					TIMER_SYNC_TICKS, 0xffffffff);
> >   	/* Enable timer0 interrupt */
> > -	val = readl(timer_of_base(&to) + TIMER_IRQ_EN_REG);
> > -	writel(val | TIMER_IRQ_EN(0), timer_of_base(&to) + TIMER_IRQ_EN_REG);
> > +	val = readl(timer_of_base(to) + TIMER_IRQ_EN_REG);
> > +	writel(val | TIMER_IRQ_EN(0), timer_of_base(to) + TIMER_IRQ_EN_REG);
> > +
> > +	return ret;
> > +err2:
> > +	kfree(to->private_data);
> > +err1:
> > +	timer_of_cleanup(to);
> > +err:
> > +	kfree(to);
> >   	return ret;
> >   }
> >   TIMER_OF_DECLARE(sun4i, "allwinner,sun4i-a10-timer",
> 
> Hi Maxime,
> Sorry to disturb. Just want to say that I'm looking forward to your
> advice on this patch. Thank you : )

I'm not the maintainer anymore. Jernej, Samuel and Daniel are the ones
you should seek review from :)

Maxime

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel