From: Felix Fietkau <nbd@nbd.name>
To: netdev@vger.kernel.org, John Crispin <john@phrozen.org>,
Sean Wang <sean.wang@mediatek.com>,
Mark Lee <Mark-MC.Lee@mediatek.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 11/14] net: ethernet: mtk_eth_soc: fix VLAN rx hardware acceleration
Date: Mon, 7 Nov 2022 19:54:49 +0100 [thread overview]
Message-ID: <20221107185452.90711-11-nbd@nbd.name> (raw)
In-Reply-To: <20221107185452.90711-1-nbd@nbd.name>
- enable VLAN untagging for PDMA rx
- make it possible to disable the feature via ethtool
- pass VLAN tag to the DSA driver
- untag special tag on PDMA only if no non-DSA devices are in use
- disable special tag untagging on 7986 for now, since it's not working yet
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 36 +++++++++++++--------
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 3 ++
2 files changed, 25 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index ab31dda2cd66..3b8995a483aa 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -2015,16 +2015,9 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget,
htons(RX_DMA_VPID(trxd.rxd4)),
RX_DMA_VID(trxd.rxd4));
} else if (trxd.rxd2 & RX_DMA_VTAG) {
- __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
+ __vlan_hwaccel_put_tag(skb, htons(RX_DMA_VPID(trxd.rxd3)),
RX_DMA_VID(trxd.rxd3));
}
-
- /* If the device is attached to a dsa switch, the special
- * tag inserted in VLAN field by hw switch can * be offloaded
- * by RX HW VLAN offload. Clear vlan info.
- */
- if (netdev_uses_dsa(netdev))
- __vlan_hwaccel_clear_tag(skb);
}
skb_record_rx_queue(skb, 0);
@@ -2847,15 +2840,17 @@ static netdev_features_t mtk_fix_features(struct net_device *dev,
static int mtk_set_features(struct net_device *dev, netdev_features_t features)
{
- int err = 0;
-
- if (!((dev->features ^ features) & NETIF_F_LRO))
- return 0;
+ struct mtk_mac *mac = netdev_priv(dev);
+ struct mtk_eth *eth = mac->hw;
+ netdev_features_t diff = dev->features ^ features;
- if (!(features & NETIF_F_LRO))
+ if ((diff & NETIF_F_LRO) && !(features & NETIF_F_LRO))
mtk_hwlro_netdev_disable(dev);
- return err;
+ /* Set RX VLAN offloading */
+ mtk_w32(eth, !!(features & NETIF_F_HW_VLAN_CTAG_RX), MTK_CDMP_EG_CTRL);
+
+ return 0;
}
/* wait for DMA to finish whatever it is doing before we start using it again */
@@ -3176,6 +3171,15 @@ static int mtk_open(struct net_device *dev)
else
refcount_inc(ð->dma_refcnt);
+ /* Hardware special tag parsing needs to be disabled if at least
+ * one MAC does not use DSA.
+ */
+ if (!netdev_uses_dsa(dev)) {
+ u32 val = mtk_r32(eth, MTK_CDMP_IG_CTRL);
+ val &= ~MTK_CDMP_STAG_EN;
+ mtk_w32(eth, val, MTK_CDMP_IG_CTRL);
+ }
+
phylink_start(mac->phylink);
netif_tx_start_all_queues(dev);
@@ -3469,6 +3473,10 @@ static int mtk_hw_init(struct mtk_eth *eth)
*/
val = mtk_r32(eth, MTK_CDMQ_IG_CTRL);
mtk_w32(eth, val | MTK_CDMQ_STAG_EN, MTK_CDMQ_IG_CTRL);
+ if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
+ val = mtk_r32(eth, MTK_CDMP_IG_CTRL);
+ mtk_w32(eth, val | MTK_CDMP_STAG_EN, MTK_CDMP_IG_CTRL);
+ }
/* Enable RX VLan Offloading */
mtk_w32(eth, 1, MTK_CDMP_EG_CTRL);
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index e09b2483c70c..26b2323185ef 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -93,6 +93,9 @@
#define MTK_CDMQ_IG_CTRL 0x1400
#define MTK_CDMQ_STAG_EN BIT(0)
+/* CDMQ Exgress Control Register */
+#define MTK_CDMQ_EG_CTRL 0x1404
+
/* CDMP Ingress Control Register */
#define MTK_CDMP_IG_CTRL 0x400
#define MTK_CDMP_STAG_EN BIT(0)
--
2.38.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-11-07 19:24 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-07 18:54 [PATCH 01/14] net: ethernet: mtk_eth_soc: account for vlan in rx header length Felix Fietkau
2022-11-07 18:54 ` [PATCH 02/14] net: ethernet: mtk_eth_soc: increase tx ring side for QDMA devices Felix Fietkau
2022-11-07 18:54 ` [PATCH 03/14] net: ethernet: mtk_eth_soc: avoid port_mg assignment on MT7622 and newer Felix Fietkau
2022-11-07 18:54 ` [PATCH 04/14] net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues Felix Fietkau
2022-11-07 18:54 ` [PATCH 05/14] net: dsa: tag_mtk: assign " Felix Fietkau
2022-11-07 20:40 ` Vladimir Oltean
2022-11-08 6:18 ` Felix Fietkau
2022-11-07 21:22 ` Vladimir Oltean
2022-11-08 6:01 ` Felix Fietkau
2022-11-08 7:58 ` Vladimir Oltean
2022-11-08 9:20 ` Felix Fietkau
2022-11-07 18:54 ` [PATCH 06/14] net: ethernet: mediatek: ppe: assign per-port queues for offloaded traffic Felix Fietkau
2022-11-07 18:54 ` [PATCH 07/14] net: ethernet: mtk_eth_soc: compile out netsys v2 code on mt7621 Felix Fietkau
2022-11-07 18:54 ` [PATCH 10/14] net: dsa: tag_mtk: parse hwaccel VLAN tags Felix Fietkau
2022-11-07 18:54 ` Felix Fietkau [this message]
2022-11-07 23:32 ` [PATCH 11/14] net: ethernet: mtk_eth_soc: fix VLAN rx hardware acceleration Vladimir Oltean
2022-11-08 6:17 ` Felix Fietkau
2022-11-07 18:54 ` [PATCH 12/14] net: ethernet: mtk_eth_soc: work around issue with sending small fragments Felix Fietkau
2022-11-07 18:54 ` [PATCH 13/14] net: ethernet: mtk_eth_soc: set NETIF_F_ALL_TSO Felix Fietkau
2022-11-07 18:54 ` [PATCH 14/14] net: ethernet: mtk_eth_soc: drop packets to WDMA if the ring is full Felix Fietkau
2022-11-07 20:55 ` [PATCH 01/14] net: ethernet: mtk_eth_soc: account for vlan in rx header length Vladimir Oltean
2022-11-08 6:18 ` Felix Fietkau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221107185452.90711-11-nbd@nbd.name \
--to=nbd@nbd.name \
--cc=Mark-MC.Lee@mediatek.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=john@phrozen.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=matthias.bgg@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sean.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox