From: Olivier Moysan <olivier.moysan@foss.st.com>
To: <fabrice.gasnier@foss.st.com>,
Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Olivier Moysan <olivier.moysan@foss.st.com>,
<linux-iio@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH 3/3] iio: adc: stm32-adc: add debugfs to read raw calibration result
Date: Tue, 15 Nov 2022 11:31:23 +0100 [thread overview]
Message-ID: <20221115103124.70074-4-olivier.moysan@foss.st.com> (raw)
In-Reply-To: <20221115103124.70074-1-olivier.moysan@foss.st.com>
Add debugfs to read linear ADC STM32 self calibration results.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
---
drivers/iio/adc/stm32-adc.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 65dd45537505..45d4e79f8e55 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -7,6 +7,7 @@
*/
#include <linux/clk.h>
+#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
@@ -1879,6 +1880,23 @@ static const struct iio_chan_spec_ext_info stm32_adc_ext_info[] = {
{},
};
+static void stm32_adc_debugfs_init(struct iio_dev *indio_dev)
+{
+ struct stm32_adc *adc = iio_priv(indio_dev);
+ struct dentry *d = iio_get_debugfs_dentry(indio_dev);
+ struct stm32_adc_calib *cal = &adc->cal;
+ char buf[16];
+ unsigned int i;
+
+ if (!adc->cfg->has_linearcal)
+ return;
+
+ for (i = 0; i < STM32H7_LINCALFACT_NUM; i++) {
+ snprintf(buf, sizeof(buf), "lincalfact%d", i + 1);
+ debugfs_create_u32(buf, 0444, d, &cal->lincalfact[i]);
+ }
+}
+
static int stm32_adc_fw_get_resolution(struct iio_dev *indio_dev)
{
struct device *dev = &indio_dev->dev;
@@ -2465,6 +2483,9 @@ static int stm32_adc_probe(struct platform_device *pdev)
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
+ stm32_adc_debugfs_init(indio_dev);
+
return 0;
err_hw_stop:
@@ -2493,6 +2514,7 @@ static int stm32_adc_remove(struct platform_device *pdev)
struct stm32_adc *adc = iio_priv(indio_dev);
pm_runtime_get_sync(&pdev->dev);
+ /* iio_device_unregister() also removes debugfs entries */
iio_device_unregister(indio_dev);
stm32_adc_hw_stop(&pdev->dev);
pm_runtime_disable(&pdev->dev);
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-11-15 10:49 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-15 10:31 [PATCH 0/3] iio: adc: stm32: add smart calibration Olivier Moysan
2022-11-15 10:31 ` [PATCH 1/3] iio: adc: stm32-adc: smart calibration support Olivier Moysan
2022-11-15 10:31 ` [PATCH 2/3] iio: adc: stm32-adc: improve calibration error log Olivier Moysan
2022-11-15 10:31 ` Olivier Moysan [this message]
2022-11-23 11:04 ` [PATCH 0/3] iio: adc: stm32: add smart calibration Fabrice Gasnier
2022-11-23 20:56 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221115103124.70074-4-olivier.moysan@foss.st.com \
--to=olivier.moysan@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=fabrice.gasnier@foss.st.com \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).