From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Sasha Levin <sashal@kernel.org>,
alexandre.belloni@bootlin.com,
Michael Grzeschik <m.grzeschik@pengutronix.de>,
sboyd@kernel.org, Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
mturquette@baylibre.com, linux-clk@vger.kernel.org,
patches@lists.linux.dev, ludovic.desroches@microchip.com,
kernel@pengutronix.de, claudiu.beznea@microchip.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5.15 019/120] ARM: at91: rm9200: fix usb device clock id
Date: Mon, 5 Dec 2022 20:09:19 +0100 [thread overview]
Message-ID: <20221205190807.152315013@linuxfoundation.org> (raw)
In-Reply-To: <20221205190806.528972574@linuxfoundation.org>
From: Michael Grzeschik <m.grzeschik@pengutronix.de>
[ Upstream commit 57976762428675f259339385d3324d28ee53ec02 ]
Referring to the datasheet the index 2 is the MCKUDP. When enabled, it
"Enables the automatic disable of the Master Clock of the USB Device
Port when a suspend condition occurs". We fix the index to the real UDP
id which "Enables the 48 MHz clock of the USB Device Port".
Cc: nicolas.ferre@microchip.com
Cc: ludovic.desroches@microchip.com
Cc: alexandre.belloni@bootlin.com
Cc: mturquette@baylibre.com
Cc: sboyd@kernel.org
Cc: claudiu.beznea@microchip.com
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: kernel@pengutronix.de
Fixes: 02ff48e4d7f7 ("clk: at91: add at91rm9200 pmc driver")
Fixes: 0e0e528d8260 ("ARM: dts: at91: rm9200: switch to new clock bindings")
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221114185923.1023249-2-m.grzeschik@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/at91rm9200.dtsi | 2 +-
drivers/clk/at91/at91rm9200.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index d1181ead18e5..21344fbc89e5 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -660,7 +660,7 @@ usb1: gadget@fffb0000 {
compatible = "atmel,at91rm9200-udc";
reg = <0xfffb0000 0x4000>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 1>;
clock-names = "pclk", "hclk";
status = "disabled";
};
diff --git a/drivers/clk/at91/at91rm9200.c b/drivers/clk/at91/at91rm9200.c
index 428a6f4b9ebc..8d36e615cd9d 100644
--- a/drivers/clk/at91/at91rm9200.c
+++ b/drivers/clk/at91/at91rm9200.c
@@ -40,7 +40,7 @@ static const struct clk_pll_characteristics rm9200_pll_characteristics = {
};
static const struct sck at91rm9200_systemck[] = {
- { .n = "udpck", .p = "usbck", .id = 2 },
+ { .n = "udpck", .p = "usbck", .id = 1 },
{ .n = "uhpck", .p = "usbck", .id = 4 },
{ .n = "pck0", .p = "prog0", .id = 8 },
{ .n = "pck1", .p = "prog1", .id = 9 },
--
2.35.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next parent reply other threads:[~2022-12-05 19:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20221205190806.528972574@linuxfoundation.org>
2022-12-05 19:09 ` Greg Kroah-Hartman [this message]
2022-12-05 19:10 ` [PATCH 5.15 111/120] serial: stm32: Factor out GPIO RTS toggling into separate function Greg Kroah-Hartman
2022-12-05 19:10 ` [PATCH 5.15 112/120] serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221205190807.152315013@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea@microchip.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=m.grzeschik@pengutronix.de \
--cc=mturquette@baylibre.com \
--cc=patches@lists.linux.dev \
--cc=sashal@kernel.org \
--cc=sboyd@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).