[PATCH v4] arm64: dts: imx8mp: Add Hantro G1, G2 DT nodes

[Marek Vasut <marex@denx.de>]

Add DT nodes for the Hantro VPU found in i.MX8MP SoC.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Abel Vesa <abel.vesa@nxp.com>
Cc: Adam Ford <aford173@gmail.com>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Jacky Bai <ping.bai@nxp.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
To: linux-arm-kernel@lists.infradead.org
---
V2: Drop the VC8000E
V3: - Drop assigned-clock-rates from G1 and G2 subnodes
    - Add RB from Laurent
V4: - Switch to nominal clock rates, G1 and BUS are sourced from
      VPU PLL at 600 MHz, G2 is sourced from SYS_PLL1 at 500 MHz
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 25 +++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 0173e394ad4d8..2349752f5ab04 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1679,6 +1679,28 @@ gpu2d: gpu@38008000 {
 			power-domains = <&pgc_gpu2d>;
 		};
 
+		vpu_g1: video-codec@38300000 {
+			compatible = "nxp,imx8mm-vpu-g1";
+			reg = <0x38300000 0x10000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
+			assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>;
+			assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
+			assigned-clock-rates = <600000000>;
+			power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G1>;
+		};
+
+		vpu_g2: video-codec@38310000 {
+			compatible = "nxp,imx8mq-vpu-g2";
+			reg = <0x38310000 0x10000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
+			assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
+			assigned-clock-rates = <500000000>;
+			power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G2>;
+		};
+
 		vpumix_blk_ctrl: blk-ctrl@38330000 {
 			compatible = "fsl,imx8mp-vpu-blk-ctrl", "syscon";
 			reg = <0x38330000 0x100>;
@@ -1690,6 +1712,9 @@ vpumix_blk_ctrl: blk-ctrl@38330000 {
 				 <&clk IMX8MP_CLK_VPU_G2_ROOT>,
 				 <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
 			clock-names = "g1", "g2", "vc8000e";
+			assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>, <&clk IMX8MP_VPU_PLL>;
+			assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
+			assigned-clock-rates = <600000000>, <600000000>;
 			interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>,
 					<&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>,
 					<&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>;
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel