From: Javier Martinez Canillas <javierm@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: "Kamil Trzciński" <ayufan@ayufan.eu>,
"Martijn Braam" <martijn@brixit.nl>,
"Sam Ravnborg" <sam@ravnborg.org>,
"Robert Mader" <robert.mader@posteo.de>,
"Tom Fitzhenry" <tom@tom-fitzhenry.me.uk>,
"Peter Robinson" <pbrobinson@gmail.com>,
"Onuralp Sezer" <thunderbirdtr@fedoraproject.org>,
dri-devel@lists.freedesktop.org, "Ondrej Jirman" <megi@xff.cz>,
"Maya Matuszczyk" <maccraft123mc@gmail.com>,
"Neal Gompa" <ngompa13@gmail.com>,
linux-arm-kernel@lists.infradead.org,
"Krzysztof Kozlowski" <krzysztof.kozlowski@linaro.org>,
"Jagan Teki" <jagan@amarulasolutions.com>,
"Javier Martinez Canillas" <javierm@redhat.com>,
"Daniel Vetter" <daniel@ffwll.ch>,
"David Airlie" <airlied@gmail.com>,
"Thierry Reding" <thierry.reding@gmail.com>
Subject: [PATCH v4 2/4] drm: panel: Add Himax HX8394 panel controller driver
Date: Fri, 30 Dec 2022 12:31:52 +0100 [thread overview]
Message-ID: <20221230113155.3430142-3-javierm@redhat.com> (raw)
In-Reply-To: <20221230113155.3430142-1-javierm@redhat.com>
From: Kamil Trzciński <ayufan@ayufan.eu>
The driver is for panels based on the Himax HX8394 controller, such as the
HannStar HSD060BHW4 720x1440 TFT LCD panel that uses a MIPI-DSI interface.
Signed-off-by: Kamil Trzciński <ayufan@ayufan.eu>
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Co-developed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
---
Changes in v4:
- Add Tom Fitzhenry's Tested-by tag.
Changes in v3:
- Add Sam Ravnborg's reviwed-by tag.
- Move driver patch after one introducing the DT binding (Sam Ravnborg).
Changes in v2:
- Add year to driver's copyright notice (Sam Ravnborg)
- Remove unused <video/display_timing.h> header include (Sam Ravnborg).
- Use mipi_dsi_dcs_write_seq() helper and drop custom macro (Sam Ravnborg).
- Drop unnecessary info messages and move useful one to debug (Sam Ravnborg).
drivers/gpu/drm/panel/Kconfig | 12 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-himax-hx8394.c | 446 +++++++++++++++++++++
3 files changed, 459 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-himax-hx8394.c
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 737edcdf9eef..7ee9c83f09a7 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -154,6 +154,18 @@ config DRM_PANEL_FEIYANG_FY07024DI26A30D
Say Y if you want to enable support for panels based on the
Feiyang FY07024DI26A30-D MIPI-DSI interface.
+config DRM_PANEL_HIMAX_HX8394
+ tristate "HIMAX HX8394 MIPI-DSI LCD panels"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y if you want to enable support for panels based on the
+ Himax HX8394 controller, such as the HannStar HSD060BHW4
+ 720x1440 TFT LCD panel that uses a MIPI-DSI interface.
+
+ If M is selected the module will be called panel-himax-hx8394.
+
config DRM_PANEL_ILITEK_IL9322
tristate "Ilitek ILI9322 320x240 QVGA panels"
depends on OF && SPI
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index f8f9d9f6a307..84c01adafd4c 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_DRM_PANEL_EBBG_FT8719) += panel-ebbg-ft8719.o
obj-$(CONFIG_DRM_PANEL_ELIDA_KD35T133) += panel-elida-kd35t133.o
obj-$(CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02) += panel-feixin-k101-im2ba02.o
obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o
+obj-$(CONFIG_DRM_PANEL_HIMAX_HX8394) += panel-himax-hx8394.o
obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o
obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9341) += panel-ilitek-ili9341.o
obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
new file mode 100644
index 000000000000..fc7a2c299f8d
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
@@ -0,0 +1,446 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for panels based on Himax HX8394 controller, such as:
+ *
+ * - HannStar HSD060BHW4 5.99" MIPI-DSI panel
+ *
+ * Copyright (C) 2021 Kamil Trzciński
+ *
+ * Based on drivers/gpu/drm/panel/panel-sitronix-st7703.c
+ * Copyright (C) Purism SPC 2019
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/media-bus-format.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+#define DRV_NAME "panel-himax-hx8394"
+
+/* Manufacturer specific commands sent via DSI, listed in HX8394-F datasheet */
+#define HX8394_CMD_SETSEQUENCE 0xb0
+#define HX8394_CMD_SETPOWER 0xb1
+#define HX8394_CMD_SETDISP 0xb2
+#define HX8394_CMD_SETCYC 0xb4
+#define HX8394_CMD_SETVCOM 0xb6
+#define HX8394_CMD_SETTE 0xb7
+#define HX8394_CMD_SETSENSOR 0xb8
+#define HX8394_CMD_SETEXTC 0xb9
+#define HX8394_CMD_SETMIPI 0xba
+#define HX8394_CMD_SETOTP 0xbb
+#define HX8394_CMD_SETREGBANK 0xbd
+#define HX8394_CMD_UNKNOWN1 0xc0
+#define HX8394_CMD_SETDGCLUT 0xc1
+#define HX8394_CMD_SETID 0xc3
+#define HX8394_CMD_SETDDB 0xc4
+#define HX8394_CMD_UNKNOWN2 0xc6
+#define HX8394_CMD_SETCABC 0xc9
+#define HX8394_CMD_SETCABCGAIN 0xca
+#define HX8394_CMD_SETPANEL 0xcc
+#define HX8394_CMD_SETOFFSET 0xd2
+#define HX8394_CMD_SETGIP0 0xd3
+#define HX8394_CMD_UNKNOWN3 0xd4
+#define HX8394_CMD_SETGIP1 0xd5
+#define HX8394_CMD_SETGIP2 0xd6
+#define HX8394_CMD_SETGPO 0xd6
+#define HX8394_CMD_SETSCALING 0xdd
+#define HX8394_CMD_SETIDLE 0xdf
+#define HX8394_CMD_SETGAMMA 0xe0
+#define HX8394_CMD_SETCHEMODE_DYN 0xe4
+#define HX8394_CMD_SETCHE 0xe5
+#define HX8394_CMD_SETCESEL 0xe6
+#define HX8394_CMD_SET_SP_CMD 0xe9
+#define HX8394_CMD_SETREADINDEX 0xfe
+#define HX8394_CMD_GETSPIREAD 0xff
+
+struct hx8394 {
+ struct device *dev;
+ struct drm_panel panel;
+ struct gpio_desc *reset_gpio;
+ struct regulator *vcc;
+ struct regulator *iovcc;
+ bool prepared;
+
+ const struct hx8394_panel_desc *desc;
+};
+
+struct hx8394_panel_desc {
+ const struct drm_display_mode *mode;
+ unsigned int lanes;
+ unsigned long mode_flags;
+ enum mipi_dsi_pixel_format format;
+ int (*init_sequence)(struct hx8394 *ctx);
+};
+
+static inline struct hx8394 *panel_to_hx8394(struct drm_panel *panel)
+{
+ return container_of(panel, struct hx8394, panel);
+}
+
+static int hsd060bhw4_init_sequence(struct hx8394 *ctx)
+{
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+ /* 5.19.8 SETEXTC: Set extension command (B9h) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETEXTC,
+ 0xff, 0x83, 0x94);
+
+ /* 5.19.2 SETPOWER: Set power (B1h) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
+ 0x48, 0x11, 0x71, 0x09, 0x32, 0x24, 0x71, 0x31, 0x55, 0x30);
+
+ /* 5.19.9 SETMIPI: Set MIPI control (BAh) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETMIPI,
+ 0x63, 0x03, 0x68, 0x6b, 0xb2, 0xc0);
+
+ /* 5.19.3 SETDISP: Set display related register (B2h) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETDISP,
+ 0x00, 0x80, 0x78, 0x0c, 0x07);
+
+ /* 5.19.4 SETCYC: Set display waveform cycles (B4h) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETCYC,
+ 0x12, 0x63, 0x12, 0x63, 0x12, 0x63, 0x01, 0x0c, 0x7c, 0x55,
+ 0x00, 0x3f, 0x12, 0x6b, 0x12, 0x6b, 0x12, 0x6b, 0x01, 0x0c,
+ 0x7c);
+
+ /* 5.19.19 SETGIP0: Set GIP Option0 (D3h) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP0,
+ 0x00, 0x00, 0x00, 0x00, 0x3c, 0x1c, 0x00, 0x00, 0x32, 0x10,
+ 0x09, 0x00, 0x09, 0x32, 0x15, 0xad, 0x05, 0xad, 0x32, 0x00,
+ 0x00, 0x00, 0x00, 0x37, 0x03, 0x0b, 0x0b, 0x37, 0x00, 0x00,
+ 0x00, 0x0c, 0x40);
+
+ /* 5.19.20 Set GIP Option1 (D5h) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP1,
+ 0x19, 0x19, 0x18, 0x18, 0x1b, 0x1b, 0x1a, 0x1a, 0x00, 0x01,
+ 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x20, 0x21, 0x18, 0x18,
+ 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+ 0x24, 0x25, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+ 0x18, 0x18, 0x18, 0x18, 0x18, 0x18);
+
+ /* 5.19.21 Set GIP Option2 (D6h) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP2,
+ 0x18, 0x18, 0x19, 0x19, 0x1b, 0x1b, 0x1a, 0x1a, 0x07, 0x06,
+ 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x25, 0x24, 0x18, 0x18,
+ 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+ 0x21, 0x20, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+ 0x18, 0x18, 0x18, 0x18, 0x18, 0x18);
+
+ /* 5.19.25 SETGAMMA: Set gamma curve related setting (E0h) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGAMMA,
+ 0x00, 0x04, 0x0c, 0x12, 0x14, 0x18, 0x1a, 0x18, 0x31, 0x3f,
+ 0x4d, 0x4c, 0x54, 0x65, 0x6b, 0x70, 0x7f, 0x82, 0x7e, 0x8a,
+ 0x99, 0x4a, 0x48, 0x49, 0x4b, 0x4a, 0x4c, 0x4b, 0x7f, 0x00,
+ 0x04, 0x0c, 0x11, 0x13, 0x17, 0x1a, 0x18, 0x31,
+ 0x3f, 0x4d, 0x4c, 0x54, 0x65, 0x6b, 0x70, 0x7f,
+ 0x82, 0x7e, 0x8a, 0x99, 0x4a, 0x48, 0x49, 0x4b,
+ 0x4a, 0x4c, 0x4b, 0x7f);
+
+ /* 5.19.17 SETPANEL (CCh) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPANEL, 0x0b);
+
+ /* Unknown command, not listed in the HX8394-F datasheet */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN1, 0x1f, 0x31);
+
+ /* 5.19.5 SETVCOM: Set VCOM voltage (B6h) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETVCOM,
+ 0x7d, 0x7d);
+
+ /* Unknown command, not listed in the HX8394-F datasheet */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN3,
+ 0x02);
+
+ /* 5.19.11 Set register bank (BDh) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK, 0x01);
+
+ /* 5.19.2 SETPOWER: Set power (B1h) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER, 0x00);
+
+ /* 5.19.11 Set register bank (BDh) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK, 0x00);
+
+ /* Unknown command, not listed in the HX8394-F datasheet */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN3,
+ 0xed);
+
+ return 0;
+}
+
+static const struct drm_display_mode hsd060bhw4_mode = {
+ .hdisplay = 720,
+ .hsync_start = 720 + 40,
+ .hsync_end = 720 + 40 + 46,
+ .htotal = 720 + 40 + 46 + 40,
+ .vdisplay = 1440,
+ .vsync_start = 1440 + 9,
+ .vsync_end = 1440 + 9 + 7,
+ .vtotal = 1440 + 9 + 7 + 7,
+ .clock = 74250,
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+ .width_mm = 68,
+ .height_mm = 136,
+};
+
+static const struct hx8394_panel_desc hsd060bhw4_desc = {
+ .mode = &hsd060bhw4_mode,
+ .lanes = 4,
+ .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST,
+ .format = MIPI_DSI_FMT_RGB888,
+ .init_sequence = hsd060bhw4_init_sequence,
+};
+
+static int hx8394_enable(struct drm_panel *panel)
+{
+ struct hx8394 *ctx = panel_to_hx8394(panel);
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+ int ret;
+
+ ret = ctx->desc->init_sequence(ctx);
+ if (ret) {
+ dev_err(ctx->dev, "Panel init sequence failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+ if (ret) {
+ dev_err(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
+ return ret;
+ }
+
+ /* Panel is operational 120 msec after reset */
+ msleep(120);
+
+ ret = mipi_dsi_dcs_set_display_on(dsi);
+ if (ret) {
+ dev_err(ctx->dev, "Failed to turn on the display: %d\n", ret);
+ goto sleep_in;
+ }
+
+ return 0;
+
+sleep_in:
+ /* This will probably fail, but let's try orderly power off anyway. */
+ ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+ if (!ret)
+ msleep(50);
+
+ return ret;
+}
+
+static int hx8394_disable(struct drm_panel *panel)
+{
+ struct hx8394 *ctx = panel_to_hx8394(panel);
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+ int ret;
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+ if (ret) {
+ dev_err(ctx->dev, "Failed to enter sleep mode: %d\n", ret);
+ return ret;
+ }
+
+ msleep(50); /* about 3 frames */
+
+ return 0;
+}
+
+static int hx8394_unprepare(struct drm_panel *panel)
+{
+ struct hx8394 *ctx = panel_to_hx8394(panel);
+
+ if (!ctx->prepared)
+ return 0;
+
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
+ regulator_disable(ctx->iovcc);
+ regulator_disable(ctx->vcc);
+
+ ctx->prepared = false;
+
+ return 0;
+}
+
+static int hx8394_prepare(struct drm_panel *panel)
+{
+ struct hx8394 *ctx = panel_to_hx8394(panel);
+ int ret;
+
+ if (ctx->prepared)
+ return 0;
+
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
+ ret = regulator_enable(ctx->vcc);
+ if (ret) {
+ dev_err(ctx->dev, "Failed to enable vcc supply: %d\n", ret);
+ return ret;
+ }
+
+ ret = regulator_enable(ctx->iovcc);
+ if (ret) {
+ dev_err(ctx->dev, "Failed to enable iovcc supply: %d\n", ret);
+ goto disable_vcc;
+ }
+
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+
+ msleep(180);
+
+ ctx->prepared = true;
+
+ return 0;
+
+disable_vcc:
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ regulator_disable(ctx->vcc);
+ return ret;
+}
+
+static int hx8394_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct hx8394 *ctx = panel_to_hx8394(panel);
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(connector->dev, ctx->desc->mode);
+ if (!mode) {
+ dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n",
+ ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
+ drm_mode_vrefresh(ctx->desc->mode));
+ return -ENOMEM;
+ }
+
+ drm_mode_set_name(mode);
+
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+ connector->display_info.width_mm = mode->width_mm;
+ connector->display_info.height_mm = mode->height_mm;
+ drm_mode_probed_add(connector, mode);
+
+ return 1;
+}
+
+static const struct drm_panel_funcs hx8394_drm_funcs = {
+ .disable = hx8394_disable,
+ .unprepare = hx8394_unprepare,
+ .prepare = hx8394_prepare,
+ .enable = hx8394_enable,
+ .get_modes = hx8394_get_modes,
+};
+
+static int hx8394_probe(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ struct hx8394 *ctx;
+ int ret;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(ctx->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+ "Failed to get reset gpio\n");
+
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ ctx->dev = dev;
+ ctx->desc = of_device_get_match_data(dev);
+
+ dsi->mode_flags = ctx->desc->mode_flags;
+ dsi->format = ctx->desc->format;
+ dsi->lanes = ctx->desc->lanes;
+
+ ctx->vcc = devm_regulator_get(dev, "vcc");
+ if (IS_ERR(ctx->vcc))
+ return dev_err_probe(dev, PTR_ERR(ctx->vcc),
+ "Failed to request vcc regulator\n");
+
+ ctx->iovcc = devm_regulator_get(dev, "iovcc");
+ if (IS_ERR(ctx->iovcc))
+ return dev_err_probe(dev, PTR_ERR(ctx->iovcc),
+ "Failed to request iovcc regulator\n");
+
+ drm_panel_init(&ctx->panel, dev, &hx8394_drm_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+
+ ret = drm_panel_of_backlight(&ctx->panel);
+ if (ret)
+ return ret;
+
+ drm_panel_add(&ctx->panel);
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ dev_err_probe(dev, ret, "mipi_dsi_attach failed\n");
+ drm_panel_remove(&ctx->panel);
+ return ret;
+ }
+
+ dev_dbg(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
+ ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
+ drm_mode_vrefresh(ctx->desc->mode),
+ mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
+
+ return 0;
+}
+
+static void hx8394_shutdown(struct mipi_dsi_device *dsi)
+{
+ struct hx8394 *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ret = drm_panel_disable(&ctx->panel);
+ if (ret < 0)
+ dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret);
+
+ ret = drm_panel_unprepare(&ctx->panel);
+ if (ret < 0)
+ dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret);
+}
+
+static void hx8394_remove(struct mipi_dsi_device *dsi)
+{
+ struct hx8394 *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ hx8394_shutdown(dsi);
+
+ ret = mipi_dsi_detach(dsi);
+ if (ret < 0)
+ dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+ drm_panel_remove(&ctx->panel);
+}
+
+static const struct of_device_id hx8394_of_match[] = {
+ { .compatible = "hannstar,hsd060bhw4", .data = &hsd060bhw4_desc },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, hx8394_of_match);
+
+static struct mipi_dsi_driver hx8394_driver = {
+ .probe = hx8394_probe,
+ .remove = hx8394_remove,
+ .shutdown = hx8394_shutdown,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = hx8394_of_match,
+ },
+};
+module_mipi_dsi_driver(hx8394_driver);
+
+MODULE_AUTHOR("Kamil Trzciński <ayufan@ayufan.eu>");
+MODULE_DESCRIPTION("DRM driver for Himax HX8394 based MIPI DSI panels");
+MODULE_LICENSE("GPL");
--
2.38.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-12-30 13:57 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-30 11:31 [PATCH v4 0/4] Add PinePhone Pro display support Javier Martinez Canillas
2022-12-30 11:31 ` [PATCH v4 1/4] dt-bindings: display: Add Himax HX8394 panel controller Javier Martinez Canillas
2022-12-30 11:31 ` Javier Martinez Canillas [this message]
2022-12-30 15:40 ` [PATCH v4 2/4] drm: panel: Add Himax HX8394 panel controller driver Ondřej Jirman
2022-12-31 15:15 ` Javier Martinez Canillas
2023-01-02 10:59 ` Ondřej Jirman
2023-01-02 13:51 ` Javier Martinez Canillas
2023-01-02 15:20 ` Ondřej Jirman
2023-01-02 18:51 ` Javier Martinez Canillas
2022-12-30 11:31 ` [PATCH v4 3/4] MAINTAINERS: Add entry for " Javier Martinez Canillas
2022-12-30 15:43 ` Ondřej Jirman
2022-12-31 15:16 ` Javier Martinez Canillas
2022-12-30 11:31 ` [PATCH v4 4/4] arm64: dts: rk3399-pinephone-pro: Add internal display support Javier Martinez Canillas
2022-12-30 15:37 ` Ondřej Jirman
2022-12-31 15:29 ` Javier Martinez Canillas
2023-01-02 10:57 ` Ondřej Jirman
2023-01-02 13:34 ` Javier Martinez Canillas
2023-01-01 21:21 ` [PATCH v4 0/4] Add PinePhone Pro " Pavel Machek
2023-01-02 9:44 ` Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221230113155.3430142-3-javierm@redhat.com \
--to=javierm@redhat.com \
--cc=airlied@gmail.com \
--cc=ayufan@ayufan.eu \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=jagan@amarulasolutions.com \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maccraft123mc@gmail.com \
--cc=martijn@brixit.nl \
--cc=megi@xff.cz \
--cc=ngompa13@gmail.com \
--cc=pbrobinson@gmail.com \
--cc=robert.mader@posteo.de \
--cc=sam@ravnborg.org \
--cc=thierry.reding@gmail.com \
--cc=thunderbirdtr@fedoraproject.org \
--cc=tom@tom-fitzhenry.me.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).