From: Shawn Guo <shawnguo@kernel.org>
To: soc@kernel.org, arm@kernel.org
Cc: Fabio Estevam <festevam@gmail.com>,
Stefan Agner <stefan@agner.ch>, Li Yang <leoyang.li@nxp.com>,
kernel@pengutronix.de, linux-imx@nxp.com,
linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] i.MX fixes for 6.2
Date: Mon, 2 Jan 2023 21:20:17 +0800 [thread overview]
Message-ID: <20230102132016.GA10699@T480> (raw)
The following changes since commit 1b929c02afd37871d5afb9d498426f83432e71c2:
Linux 6.2-rc1 (2022-12-25 13:41:39 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-6.2
for you to fetch changes up to 490748874ebf1875420fc29b335bba2075dd1b5e:
soc: imx8m: Fix incorrect check for of_clk_get_by_name() (2023-01-02 21:16:05 +0800)
----------------------------------------------------------------
i.MX fixes for 6.2:
- Fix i.MX8MP DT for missing GPC Interrupt, power-domain typo and USB
clock error.
- Fix mach-imx cpu code to add missing of_node_put() call.
- A couple of verdin-imx8mm DT fixes for audio playback support.
- Fix pca9547 i2c-mux node name for i.MX and Vybrid device trees.
- Fix an imx93-11x11-evk uSDHC pad setting problem that causes Micron
eMMC CMD8 CRC error in HS400ES/HS400 mode.
- A couple of imx8mp-blk-ctrl driver fixes from Lucas Stach, enabling
pixclk with HDMI_TX_PHY PD, dropping power device name setting.
- Fix the error check for of_clk_get_by_name() in soc-imx8m driver.
- Other various DT fixes and cleanups.
----------------------------------------------------------------
Adam Ford (3):
arm64: dts: imx8mm-beacon: Fix ecspi2 pinmux
arm64: dts: imx8mp: Fix missing GPC Interrupt
arm64: dts: imx8mp: Fix power-domain typo
Dario Binacchi (1):
ARM: imx: add missing of_node_put()
Emanuele Ghidoli (2):
arm64: dts: verdin-imx8mm: fix dahlia audio playback
arm64: dts: verdin-imx8mm: fix dev board audio playback
Fabio Estevam (4):
arm64: dts: imx8mp-phycore-som: Remove invalid PMIC property
ARM: dts: imx6ul-pico-dwarf: Use 'clock-frequency'
ARM: dts: imx7d-pico: Use 'clock-frequency'
ARM: dts: imx6qdl-gw560x: Remove incorrect 'uart-has-rtscts'
Geert Uytterhoeven (3):
ARM: dts: imx: Fix pca9547 i2c-mux node name
ARM: dts: vf610: Fix pca9548 i2c-mux node names
arm64: dts: freescale: Fix pca954x i2c-mux node names
Haibo Chen (1):
arm64: dts: imx93-11x11-evk: correct clock and strobe pad setting
Krzysztof Kozlowski (1):
arm64: dts: imx8mq-thor96: fix no-mmc property for SDHCI
Li Jun (1):
arm64: dts: imx8mp: correct usb clocks
Lucas Stach (2):
soc: imx: imx8mp-blk-ctrl: enable global pixclk with HDMI_TX_PHY PD
soc: imx: imx8mp-blk-ctrl: don't set power device name
Marco Felsch (1):
arm64: dts: imx8mp-evk: pcie0-refclk cosmetic cleanup
Marek Vasut (1):
arm64: dts: imx8mm: Drop xtal clock specifier from eDM SBC
Miaoqian Lin (1):
soc: imx8m: Fix incorrect check for of_clk_get_by_name()
Tim Harvey (1):
arm64: dts: imx8mm-venice-gw7901: fix USB2 controller OC polarity
arch/arm/boot/dts/imx53-ppd.dts | 2 +-
arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 1 -
arch/arm/boot/dts/imx6ul-pico-dwarf.dts | 2 +-
arch/arm/boot/dts/imx7d-pico-dwarf.dts | 4 ++--
arch/arm/boot/dts/imx7d-pico-nymph.dts | 4 ++--
arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 2 +-
arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 2 +-
arch/arm/mach-imx/cpu-imx25.c | 1 +
arch/arm/mach-imx/cpu-imx27.c | 1 +
arch/arm/mach-imx/cpu-imx31.c | 1 +
arch/arm/mach-imx/cpu-imx35.c | 1 +
arch/arm/mach-imx/cpu-imx5.c | 1 +
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi | 2 +-
.../arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi | 4 ++--
.../boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts | 2 +-
arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts | 2 +-
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 1 +
arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi | 1 +
arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi | 1 +
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 4 ++--
arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi | 10 ----------
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 15 ++++++++-------
arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts | 4 ++--
arch/arm64/boot/dts/freescale/imx8mq-thor96.dts | 4 ++--
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 2 +-
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts | 6 +++---
drivers/soc/imx/imx8mp-blk-ctrl.c | 7 ++++---
drivers/soc/imx/soc-imx8m.c | 4 ++--
36 files changed, 53 insertions(+), 54 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
reply other threads:[~2023-01-02 13:21 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230102132016.GA10699@T480 \
--to=shawnguo@kernel.org \
--cc=arm@kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=soc@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).