linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: "Rafał Miłecki" <zajec5@gmail.com>
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: "Shawn Guo" <shawnguo@kernel.org>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Pengutronix Kernel Team" <kernel@pengutronix.de>,
	"Fabio Estevam" <festevam@gmail.com>,
	"NXP Linux Team" <linux-imx@nxp.com>,
	"Miquel Raynal" <miquel.raynal@bootlin.com>,
	"Michael Walle" <michael@walle.cc>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, u-boot@lists.denx.de,
	"Rafał Miłecki" <rafal@milecki.pl>
Subject: [PATCH 2/3] nvmem: core: allow .read_post_process() callbacks to adjust data length
Date: Thu,  5 Jan 2023 18:10:37 +0100	[thread overview]
Message-ID: <20230105171038.13649-2-zajec5@gmail.com> (raw)
In-Reply-To: <20230105171038.13649-1-zajec5@gmail.com>

From: Rafał Miłecki <rafal@milecki.pl>

Sometimes reading NVMEM cell value involves some data reformatting. It
requires passing updated size value to the caller. Support that.

It's required e.g. to provide properly formatted MAC address in case
it's stored in a non-binary format (e.g. using ASCII).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 drivers/nvmem/core.c             | 5 +++--
 drivers/nvmem/imx-ocotp.c        | 6 +++---
 drivers/nvmem/layouts/onie-tlv.c | 2 +-
 drivers/nvmem/layouts/sl28vpd.c  | 4 ++--
 include/linux/nvmem-provider.h   | 2 +-
 5 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 1b61c8bf0de4..1daf5a1d3ec7 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -1537,6 +1537,7 @@ static int __nvmem_cell_read(struct nvmem_device *nvmem,
 			     struct nvmem_cell_entry *cell,
 			     void *buf, size_t *len, const char *id, int index)
 {
+	size_t bytes = cell->bytes;
 	int rc;
 
 	rc = nvmem_reg_read(nvmem, cell->offset, buf, cell->bytes);
@@ -1550,13 +1551,13 @@ static int __nvmem_cell_read(struct nvmem_device *nvmem,
 
 	if (cell->read_post_process) {
 		rc = cell->read_post_process(cell->priv, id, index,
-					     cell->offset, buf, cell->bytes);
+					     cell->offset, buf, &bytes);
 		if (rc)
 			return rc;
 	}
 
 	if (len)
-		*len = cell->bytes;
+		*len = bytes;
 
 	return 0;
 }
diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
index ac0edb6398f1..ebd0e9e0314e 100644
--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -223,15 +223,15 @@ static int imx_ocotp_read(void *context, unsigned int offset,
 }
 
 static int imx_ocotp_cell_pp(void *context, const char *id, int index,
-			     unsigned int offset, void *data, size_t bytes)
+			     unsigned int offset, void *data, size_t *bytes)
 {
 	u8 *buf = data;
 	int i;
 
 	/* Deal with some post processing of nvmem cell data */
 	if (id && !strcmp(id, "mac-address"))
-		for (i = 0; i < bytes / 2; i++)
-			swap(buf[i], buf[bytes - i - 1]);
+		for (i = 0; i < *bytes / 2; i++)
+			swap(buf[i], buf[*bytes - i - 1]);
 
 	return 0;
 }
diff --git a/drivers/nvmem/layouts/onie-tlv.c b/drivers/nvmem/layouts/onie-tlv.c
index 074c7c700845..2cb7112229ba 100644
--- a/drivers/nvmem/layouts/onie-tlv.c
+++ b/drivers/nvmem/layouts/onie-tlv.c
@@ -76,7 +76,7 @@ static const char *onie_tlv_cell_name(u8 type)
 
 static int onie_tlv_mac_read_cb(void *priv, const char *id, int index,
 				unsigned int offset, void *buf,
-				size_t bytes)
+				size_t *bytes)
 {
 	eth_addr_add(buf, index);
 
diff --git a/drivers/nvmem/layouts/sl28vpd.c b/drivers/nvmem/layouts/sl28vpd.c
index a36800f201a3..63c0da58ad60 100644
--- a/drivers/nvmem/layouts/sl28vpd.c
+++ b/drivers/nvmem/layouts/sl28vpd.c
@@ -23,9 +23,9 @@ struct sl28vpd_v1 {
 
 static int sl28vpd_mac_address_pp(void *priv, const char *id, int index,
 				  unsigned int offset, void *buf,
-				  size_t bytes)
+				  size_t *bytes)
 {
-	if (bytes != ETH_ALEN)
+	if (*bytes != ETH_ALEN)
 		return -EINVAL;
 
 	if (index < 0)
diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h
index 0cf9f9490514..5d896eec2f1c 100644
--- a/include/linux/nvmem-provider.h
+++ b/include/linux/nvmem-provider.h
@@ -21,7 +21,7 @@ typedef int (*nvmem_reg_write_t)(void *priv, unsigned int offset,
 /* used for vendor specific post processing of cell data */
 typedef int (*nvmem_cell_post_process_t)(void *priv, const char *id, int index,
 					 unsigned int offset, void *buf,
-					 size_t bytes);
+					 size_t *bytes);
 
 enum nvmem_type {
 	NVMEM_TYPE_UNKNOWN = 0,
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2023-01-05 22:24 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-05 17:10 [PATCH 1/3] dt-bindings: nvmem: u-boot,env: add MAC's #nvmem-cell-cells Rafał Miłecki
2023-01-05 17:10 ` Rafał Miłecki [this message]
2023-01-05 21:22   ` [PATCH 2/3] nvmem: core: allow .read_post_process() callbacks to adjust data length Michael Walle
2023-01-05 17:10 ` [PATCH 3/3] nvmem: u-boot-env: post process "ethaddr" env variable Rafał Miłecki
2023-01-08 22:17 ` [PATCH 1/3] dt-bindings: nvmem: u-boot,env: add MAC's #nvmem-cell-cells Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230105171038.13649-2-zajec5@gmail.com \
    --to=zajec5@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael@walle.cc \
    --cc=miquel.raynal@bootlin.com \
    --cc=rafal@milecki.pl \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).